62-0271-71 End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-11
Spec
- Permukaan perawatan: Pelapis FX
- Sudut Helix: sekitar 20 derajat
Ukuran paket：16×95×16 mm 100 g [Tentang Ukuran Paket]
| Perintah No. | 62-0271-71 | |
|---|---|---|
| Model No. | FX-ZDS-11 | |
| Harga standar |
JPY: 24,800
USD: 155.46
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
62-0271-68 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-10 | FX-ZDS-10 | 1piece | JPY: 20,700 | USD: 129.76 |
|
|
 |
62-0271-69 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-10.3 | FX-ZDS-10.3 | 1piece | JPY: 24,800 | USD: 155.46 |
|
|
 |
62-0271-70 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-10.5 | FX-ZDS-10.5 | 1piece | JPY: 24,800 | USD: 155.46 |
|
|
 |
62-0271-71 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-11 | FX-ZDS-11 | 1piece | JPY: 24,800 | USD: 155.46 |
|
|
 |
62-0271-72 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-11.5 | FX-ZDS-11.5 | 1piece | JPY: 26,100 | USD: 163.61 |
|
|
 |
62-0271-73 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-12 | FX-ZDS-12 | 1piece | JPY: 30,400 | USD: 190.56 |
|
|
 |
62-0271-74 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-12.5 | FX-ZDS-12.5 | 1piece | JPY: 35,400 | USD: 221.90 |
|
|
 |
62-0271-75 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-13 | FX-ZDS-13 | 1piece | JPY: 35,400 | USD: 221.90 |
|
|
 |
62-0271-76 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-13.5 | FX-ZDS-13.5 | 1piece | JPY: 43,300 | USD: 271.42 |
|
|
 |
62-0271-77 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-14 | FX-ZDS-14 | 1piece | JPY: 43,300 | USD: 271.42 |
|
|
 |
62-0271-78 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-14.5 | FX-ZDS-14.5 | 1piece | JPY: 50,100 | USD: 314.05 |
|
|
 |
62-0271-79 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-15 | FX-ZDS-15 | 1piece | JPY: 50,100 | USD: 314.05 |
|
|
 |
62-0271-80 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-15.5 | FX-ZDS-15.5 | 1piece | JPY: 50,800 | USD: 318.44 |
|
|
 |
62-0271-81 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-16 | FX-ZDS-16 | 1piece | JPY: 51,000 | USD: 319.69 |
|
|
 |
62-0271-82 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-16.5 | FX-ZDS-16.5 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-83 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-17 | FX-ZDS-17 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-84 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-17.5 | FX-ZDS-17.5 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-85 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-18 | FX-ZDS-18 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-86 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-18.5 | FX-ZDS-18.5 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-87 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-19 | FX-ZDS-19 | 1piece | JPY: 84,700 | USD: 530.94 |
|
|
 |
62-0271-88 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-19.5 | FX-ZDS-19.5 | 1piece | JPY: 85,600 | USD: 536.58 |
|
|
 |
62-0271-89 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-20 | FX-ZDS-20 | 1piece | JPY: 85,600 | USD: 536.58 |
|
|
 |
62-0271-90 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-3 | FX-ZDS-3 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-91 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-3.3 | FX-ZDS-3.3 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-92 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-3.5 | FX-ZDS-3.5 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-93 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-4 | FX-ZDS-4 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-94 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-4.2 | FX-ZDS-4.2 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-95 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-4.5 | FX-ZDS-4.5 | 1piece | JPY: 10,300 | USD: 64.57 |
|
|
 |
62-0271-96 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-5 | FX-ZDS-5 | 1piece | JPY: 11,200 | USD: 70.21 |
|
|
 |
62-0271-97 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-5.5 | FX-ZDS-5.5 | 1piece | JPY: 11,600 | USD: 72.71 |
|
|
 |
62-0271-98 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-6 | FX-ZDS-6 | 1piece | JPY: 11,600 | USD: 72.71 |
|
|
 |
62-0271-99 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-6.5 | FX-ZDS-6.5 | 1piece | JPY: 15,100 | USD: 94.65 |
|
|
 |
62-0272-01 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-6.8 | FX-ZDS-6.8 | 1piece | JPY: 15,100 | USD: 94.65 |
|
|
 |
62-0272-02 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-7 | FX-ZDS-7 | 1piece | JPY: 15,100 | USD: 94.65 |
|
|
 |
62-0272-03 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-7.5 | FX-ZDS-7.5 | 1piece | JPY: 15,100 | USD: 94.65 |
|
|
 |
62-0272-04 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-8 | FX-ZDS-8 | 1piece | JPY: 17,200 | USD: 107.82 |
|
|
 |
62-0272-05 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-8.5 | FX-ZDS-8.5 | 1piece | JPY: 20,700 | USD: 129.76 |
|
|
 |
62-0272-06 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-9 | FX-ZDS-9 | 1piece | JPY: 20,700 | USD: 129.76 |
|
|
 |
62-0272-07 | End Mill untuk Carbide Counterbore Machining, FX Coated, 2-Flute Short FX-ZDS-9.5 | FX-ZDS-9.5 | 1piece | JPY: 20,700 | USD: 129.76 |
|