61-1408-49 Pemotong Lubang Ganda (Cutter, Φ35mm) DH35C
Fitur
- The special blade type enables hole drilling for layered cutting of composite and laminated materials. (There is no need to spin every single layer or remove chips.)
- The cutter and shank can be attached and detached with one touch, and loose debris can be easily removed. (No tools necessary for attaching and detaching)
- One shank can be used in all sizes, making it very economical.
- Work Material: Wood (Compagnets, particle boards, laminated wood, etc.), Resin (Plastic drainage mass, artificial marble, PVC, acrylic, decora, melamine, FRP, etc.), Metal (Iron Plate, Stainless Steel Plate, Metal-Based Siding), Ceramic Siding, Cakal Plate, Gypsum Board, etc.
Spec
- Diameter pedang (mm): 35
- kedalaman payudara (mm): 65
- Diameter gula (mm):
- ketebalan pedang (mm): 3
- Massa (G): 140
- Kemampuan memotong efektif: Kayu, Resin 65mm, Metal 1mm
- Gunakan Alat: Drill Listrik, Mesin Pengeboran
- Bagian pedang: Tips Karbide disemen
- Aplikasi: bagian kerja: Kayu (panel beton, Papan Partikel, kayu laminasi, dll), Resin (Lubang Gambar plastik, Marble Artifisial, PVC, Acrilik, Decola, Melamine, FRP, dll), Metal (piring besi, piring baja Stainless, siding), siding sistem keramik, piring kalsium, papan gipsum, dll.
- Negara asal: Jepang
- Berat: 140 g
- Nomor model produsen: DH35C
- KODE No.: 353-6483
Ukuran paket：55×137×40 mm 130 g [Tentang Ukuran Paket]
| Perintah No. | 61-1408-49 | |
|---|---|---|
| Model No. | DH35C | |
| Kode JAN | 4993452303354 | |
| Harga standar |
JPY: 7,160
USD: 44.88
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Product category 1 |
Product category 2 |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1408-59 | Dual Hole Cutter (bor tengah) DH8125 | DH8125 | Center drill | Heiss | 1piece | JPY: 2,710 | USD: 16.99 |
|
|
 |
61-1408-47 | Pemotong Lubang Ganda (Cutter, Φ28mm) DH28C | DH28C | Cutter only | Cemented carbide | 1piece | JPY: 6,250 | USD: 39.18 |
|
|
 |
61-1408-48 | Pemotong Lubang Ganda (Cutter, Φ32mm) DH32C | DH32C | Cutter only | Cemented carbide | 1piece | JPY: 7,160 | USD: 44.88 |
|
|
 |
61-1408-49 | Pemotong Lubang Ganda (Cutter, Φ35mm) DH35C | DH35C | Cutter only | Cemented carbide | 1piece | JPY: 7,160 | USD: 44.88 |
|
|
 |
61-1408-50 | Pemotong Lubang Ganda (Cutter, Φ38mm) DH38C | DH38C | Cutter only | Cemented carbide | 1piece | JPY: 7,920 | USD: 49.65 |
|
|
 |
61-1408-51 | Pemotong Lubang Ganda (Cutter, Φ50mm) DH50C | DH50C | Cutter only | Cemented carbide | 1piece | JPY: 9,590 | USD: 60.11 |
|
|
 |
61-1408-52 | Pemotong Lubang Ganda (Cutter, Φ65mm) DH65C | DH65C | Cutter only | Cemented carbide | 1piece | JPY: 13,900 | USD: 87.13 |
|
|
 |
61-1408-53 | Pemotong Lubang Ganda (Cutter, Φ95mm) DH95C | DH95C | Cutter only | Cemented carbide | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
61-1408-54 | Pemotong Lubang Ganda (Cutter, Φ120mm) DH120C | DH120C | Cutter only | Cemented carbide | 1piece | JPY: 26,200 | USD: 164.23 |
|
|
 |
61-1408-40 | Tionghoa Hole Cutter (Φ28mm) DH28 | DH28 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 11,300 | USD: 70.83 |
|
|
 |
61-1408-41 | Tionghoa Hole Cutter (Φ32mm) DH32 | DH32 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 12,200 | USD: 76.48 |
|
|
 |
61-1408-42 | Tionghoa Hole Cutter (Φ38mm) DH38 | DH38 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 13,000 | USD: 81.49 |
|
|
 |
61-1408-43 | Tionghoa Hole Cutter (Φ50mm) DH50 | DH50 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
61-1408-44 | Tionghoa Hole Cutter (Φ65mm) DH65 | DH65 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 18,900 | USD: 118.47 |
|
|
 |
61-1408-45 | Tionghoa Hole Cutter (Φ95mm) DH95 | DH95 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 24,100 | USD: 151.07 |
|
|
 |
61-1408-46 | Tionghoa Hole Cutter (Φ120mm) DH120 | DH120 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 31,200 | USD: 195.58 |
|
|
 |
61-1408-57 | Dual Hole Cutter (SDS Shank) DHSKD | DHSKD | Shank | SDS | 1piece | JPY: 5,010 | USD: 31.41 |
|
|
 |
61-1408-58 | Hole Cutter (SDS Long Shank) DHSKDL | DHSKDL | Shank | SDS | 1piece | JPY: 10,500 | USD: 65.82 |
|
|
 |
61-1408-55 | Tepian Lubang Ganda (Dekut Standar) DHSK | DHSK | Shank | Straight | 1piece | JPY: 5,010 | USD: 31.41 |
|
|
 |
61-1408-56 | Hole Cutter Ganda (Tepi Panjang) DHSKL | DHSKL | Shank | Straight | 1piece | JPY: 10,500 | USD: 65.82 |
|