61-1395-49 Carbide Hole saw (METACORE Triple, Φ20mm) MCTR-20
Fitur
- Uses a 3-blade set that is hard to tip even for hard use.
- Perforation of curved surface such as thick steel sheet to thick metal pipe is also possible.
- The blade design is designed to reduce friction, resulting in lighter, speedier drilling and longer life than conventional (flat) blades.
- The use of a step center drill reduces the impact when the center drill is penetrated.
- Uses a 10 mm/13 mm chuck combination shank with any drill chuck diameter.
- Drilling of thick steel plates and perforating curved surfaces such as thick metal pipes are also possible.
- The blade design is designed to reduce friction, resulting in lighter and speedier drilling and longer life than conventional (flat) blades.
- Work Material: Iron Plate, Thick Steel Plate (25 mm or Less), Stainless Steel Plate (10 mm or Less), Aluminum Plate (5 mm or Less), Pipe Material, etc.
Spec
- Diameter pedang (mm): 20
- kedalaman payudara (mm): 25
- Diameter gula (mm): 10,13
- ketebalan pedang (mm): 2,8
- Panjang efektif (mm): 25
- Massa (G): 125
- Motor Listrik Konform: Drill Listrik, Mesin Pengeboran, Vibration Drill (mode rotasi)
- Bagian isi: Baja paduan
- Bagian pedang: Tips Karbide disemen
- Tengahkan Bor: Baja Kecepatan Tinggi (HSS)
- Aplikasi: bagian kerja: lempengan besi, lempengan baja tebal (25 mm atau kurang), lempengan baja Stainless (10 mm atau kurang), lempengan aluminium (5 mm atau kurang), Pipa.
- Negara asal: Jepang
- Berat: 125 g
- * Tip hilang untuk menyebabkan, tepi karbide disemen hingga sulit untuk dipukul, Pusat Telusuri hingga lokakarya waktu menjadi sangat jelas pada Jangan.
- Nomor model produsen: MCTR20
- KODE No.: 333-3795
Ukuran paket：51×140×36 mm 130 g [Tentang Ukuran Paket]
| Perintah No. | 61-1395-49 | |
|---|---|---|
| Model No. | MCTR-20 | |
| Kode JAN | 4989270470125 | |
| Harga standar |
JPY: 4,930
USD: 30.90
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter (mm) |
Blade thickness (mm) |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1395-44 | Carbide Hole saw (METACORE Triple, Φ14mm) MCTR-14 | MCTR-14 | 14mm | 2.8mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-45 | Carbide Hole saw (METACORE Triple, Φ15mm) MCTR-15 | MCTR-15 | 15mm | 2.6mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-46 | Carbide Hole saw (METACORE Triple, Φ16mm) MCTR-16 | MCTR-16 | 16mm | 2.6mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-47 | Carbide Hole saw (METACORE Triple, Φ18mm) MCTR-18 | MCTR-18 | 18mm | 2.8mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-48 | Carbide Hole saw (METACORE Triple, Φ19mm) MCTR-19 | MCTR-19 | 19mm | 2.8mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-49 | Carbide Hole saw (METACORE Triple, Φ20mm) MCTR-20 | MCTR-20 | 20mm | 2.8mm | 1piece | JPY: 4,930 | USD: 30.90 |
|
|
 |
61-1395-50 | Carbide Hole saw (METACORE Triple, Φ21mm) MCTR-21 | MCTR-21 | 21mm | 2.8mm | 1piece | JPY: 5,080 | USD: 31.84 |
|
|
 |
61-1395-51 | Carbide Hole saw (METACORE Triple, Φ22mm) MCTR-22 | MCTR-22 | 22mm | 2.8mm | 1piece | JPY: 5,080 | USD: 31.84 |
|
|
 |
61-1395-52 | Carbide Hole saw (METACORE Triple, Φ23mm) MCTR-23 | MCTR-23 | 23mm | 2.8mm | 1piece | JPY: 5,080 | USD: 31.84 |
|
|
 |
61-1395-53 | Carbide Hole saw (METACORE Triple, Φ24mm) MCTR-24 | MCTR-24 | 24mm | 2.8mm | 1piece | JPY: 5,080 | USD: 31.84 |
|
|
 |
61-1395-54 | Carbide Hole saw (METACORE Triple, Φ25mm) MCTR-25 | MCTR-25 | 25mm | 2.8mm | 1piece | JPY: 5,080 | USD: 31.84 |
|
|
 |
61-1395-55 | Carbide Hole saw (METACORE Triple, Φ26mm) MCTR-26 | MCTR-26 | 26mm | 2.8mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1395-56 | Carbide Hole saw (METACORE Triple, Φ27mm) MCTR-27 | MCTR-27 | 27mm | 2.8mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1395-57 | Carbide Hole saw (METACORE Triple, Φ28mm) MCTR-28 | MCTR-28 | 28mm | 2.8mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1395-58 | Carbide Hole saw (METACORE Triple, Φ30mm) MCTR-30 | MCTR-30 | 30mm | 2.8mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1395-59 | Carbide Hole saw (METACORE Triple, Φ32mm) MCTR-32 | MCTR-32 | 32mm | 2.8mm | 1piece | JPY: 6,650 | USD: 41.69 |
|
|
 |
61-1395-60 | Carbide Hole saw (METACORE Triple, Φ33mm) MCTR-33 | MCTR-33 | 33mm | 2.8mm | 1piece | JPY: 6,650 | USD: 41.69 |
|
|
 |
61-1395-61 | Carbide Hole saw (METACORE Triple, Φ34mm) MCTR-34 | MCTR-34 | 34mm | 2.8mm | 1piece | JPY: 6,650 | USD: 41.69 |
|
|
 |
61-1395-62 | Carbide Hole saw (METACORE Triple, Φ35mm) MCTR-35 | MCTR-35 | 35mm | 2.8mm | 1piece | JPY: 6,650 | USD: 41.69 |
|
|
 |
61-1395-63 | Carbide Hole saw (METACORE Triple, Φ38mm) MCTR-38 | MCTR-38 | 38mm | 2.8mm | 1piece | JPY: 7,720 | USD: 48.39 |
|
|
 |
61-1395-64 | Carbide Hole saw (METACORE Triple, Φ40mm) MCTR-40 | MCTR-40 | 40mm | 2.8mm | 1piece | JPY: 7,720 | USD: 48.39 |
|
|
 |
61-1395-65 | Carbide Hole saw (METACORE Triple, Φ42mm) MCTR-42 | MCTR-42 | 42mm | 2.8mm | 1piece | JPY: 8,930 | USD: 55.98 |
|
|
 |
61-1395-66 | Carbide Hole saw (METACORE Triple, Φ45mm) MCTR-45 | MCTR-45 | 45mm | 2.8mm | 1piece | JPY: 8,930 | USD: 55.98 |
|
|
 |
61-1395-67 | Carbide Hole saw (METACORE Triple, Φ48mm) MCTR-48 | MCTR-48 | 48mm | 2.8mm | 1piece | JPY: 9,720 | USD: 60.93 |
|
|
 |
61-1395-68 | Carbide Hole saw (METACORE Triple, Φ50mm) MCTR-50 | MCTR-50 | 50mm | 2.8mm | 1piece | JPY: 9,720 | USD: 60.93 |
|
|
 |
61-1395-69 | Carbide Hole saw (METACORE Triple, Φ53mm) MCTR-53 | MCTR-53 | 53mm | 2.8mm | 1piece | JPY: 11,800 | USD: 73.97 |
|
|
 |
61-1395-70 | Carbide Hole saw (METACORE Triple, Φ55mm) MCTR-55 | MCTR-55 | 55mm | 2.8mm | 1piece | JPY: 11,800 | USD: 73.97 |
|
|
 |
61-1395-71 | Carbide Hole saw (METACORE Triple, Φ60mm) MCTR-60 | MCTR-60 | 60mm | 2.8mm | 1piece | JPY: 13,300 | USD: 83.37 |
|
|
 |
61-1395-72 | Carbide Hole saw (METACORE Triple, Φ65mm) MCTR-65 | MCTR-65 | 65mm | 2.8mm | 1piece | JPY: 14,300 | USD: 89.64 |
|
|
 |
61-1395-73 | Carbide Hole saw (METACORE Triple, Φ70mm) MCTR-70 | MCTR-70 | 70mm | 2.8mm | 1piece | JPY: 16,100 | USD: 100.92 |
|
|
 |
61-1395-74 | Carbide Hole saw (METACORE Triple, Φ75mm) MCTR-75 | MCTR-75 | 75mm | 2.8mm | 1piece | JPY: 17,500 | USD: 109.70 |
|
|
 |
61-1395-75 | Carbide Hole saw (METACORE Triple, Φ80mm) MCTR-80 | MCTR-80 | 80mm | 2.8mm | 1piece | JPY: 18,500 | USD: 115.97 |
|
|
 |
61-1395-76 | Carbide Hole saw (METACORE Triple, Φ90mm) MCTR-90 | MCTR-90 | 90mm | 2.8mm | 1piece | JPY: 22,300 | USD: 139.79 |
|
|
 |
61-1395-77 | Carbide Hole saw (METACORE Triple, Φ100mm) MCTR-100 | MCTR-100 | 100mm | 2.6mm | 1piece | JPY: 25,100 | USD: 157.34 |
|