61-1278-13 Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,3, Φ4.0 X Blade Length: 8mm MS2MRBD0400R030
Fitur
- This series uses MS coating to realize cost performance.
- Work Material: From raw material to high hardness steel (~55HRC) to difficult-to-cut material.
Spec
- Radius sudut (mm): 0,3
- diameter bilah (mm): 4,0
- panjang bilah (mm): 8
- Panjang (mm): 50
- Diameter gula (mm): 6
- Permukaan perawatan: (Al, Ti) N coating (MS)
- sekrup adalah sudut 30°
- Lembar tengah: dengan
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Viable dari baja keras (50 HRC), material sulit-ke-mesin.
- Negara asal: Jepang
- Nomor model produsen: MS2MRBD0400R030
- KODE No.: 671-2011
Ukuran paket：13×67×11 mm 20 g [Tentang Ukuran Paket]
| Perintah No. | 61-1278-13 | |
|---|---|---|
| Model No. | MS2MRBD0400R030 | |
| Kode JAN | 4994196349905 | |
| Harga standar |
JPY: 6,370
USD: 39.93
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1278-04 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,2, Φ1.0 X Blade Length: 2mm) MS2MRBD0100R020 | MS2MRBD0100R020 | 1.0mm | 2.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1278-05 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,2, Φ2.0 X Blade Length: 4 mm) MS2MRBD0200R020 | MS2MRBD0200R020 | 2.0mm | 4.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1278-06 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,3, Φ2.0 X Blade Length: 4 mm) MS2MRBD0200R030 | MS2MRBD0200R030 | 2.0mm | 4.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1278-07 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ2.0 X Blade Length: 4 mm) MS2MRBD0200R050 | MS2MRBD0200R050 | 2.0mm | 4.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1278-08 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,2, Φ2.5 X Blade Length: 5mm) MS2MRBD0250R020 | MS2MRBD0250R020 | 2.5mm | 5.0mm | 1piece | JPY: 5,510 | USD: 34.54 |
|
|
 |
61-1278-09 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ2.5 X Blade Length: 5mm) MS2MRBD0250R050 | MS2MRBD0250R050 | 2.5mm | 5.0mm | 1piece | JPY: 6,000 | USD: 37.61 |
|
|
 |
61-1278-10 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,3, Φ3.0 X Blade Length: 6 mm) MS2MRBD0300R030 | MS2MRBD0300R030 | 3.0mm | 6.0mm | 1piece | JPY: 6,000 | USD: 37.61 |
|
|
 |
61-1278-11 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ3.0 X Blade Length: 6 mm) MS2MRBD0300R050 | MS2MRBD0300R050 | 3.0mm | 6.0mm | 1piece | JPY: 6,620 | USD: 41.50 |
|
|
 |
61-1278-12 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 1.0, Φ3.0 X Blade Length: 6 mm) MS2MRBD0300R100 | MS2MRBD0300R100 | 3.0mm | 6.0mm | 1piece | JPY: 7,110 | USD: 44.57 |
|
|
 |
61-1278-13 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,3, Φ4.0 X Blade Length: 8mm MS2MRBD0400R030 | MS2MRBD0400R030 | 4.0mm | 8.0mm | 1piece | JPY: 6,370 | USD: 39.93 |
|
|
 |
61-1278-14 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ4.0 X Blade Length: 8mm MS2MRBD0400R050 | MS2MRBD0400R050 | 4.0mm | 8.0mm | 1piece | JPY: 7,050 | USD: 44.19 |
|
|
 |
61-1278-15 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 1.0, Φ4.0 X Blade Length: 8mm MS2MRBD0400R100 | MS2MRBD0400R100 | 4.0mm | 8.0mm | 1piece | JPY: 7,540 | USD: 47.26 |
|
|
 |
61-1278-16 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ5.0 X Blade Length: 10mm) MS2MRBD0500R050 | MS2MRBD0500R050 | 5.0mm | 10.0mm | 1piece | JPY: 7,110 | USD: 44.57 |
|
|
 |
61-1278-17 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,3, Φ6.0 X Blade Length: 12mm) MS2MRBD0600R030 | MS2MRBD0600R030 | 6.0mm | 12.0mm | 1piece | JPY: 7,110 | USD: 44.57 |
|
|
 |
61-1278-18 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 0,5, Φ6.0 X Blade Length: 12mm) MS2MRBD0600R050 | MS2MRBD0600R050 | 6.0mm | 12.0mm | 1piece | JPY: 7,250 | USD: 45.45 |
|
|
 |
61-1278-19 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 1.0, Φ6.0 X Blade Length: 12mm) MS2MRBD0600R100 | MS2MRBD0600R100 | 6.0mm | 12.0mm | 1piece | JPY: 7,740 | USD: 48.52 |
|
|
 |
61-1278-20 | Carbide Radius Endmill (MSTAR, 2 Pedang, radius Sudut: 2.0, Φ6.0 X Blade Length: 12mm) MS2MRBD0600R200 | MS2MRBD0600R200 | 6.0mm | 12.0mm | 1piece | JPY: 8,290 | USD: 51.97 |
|