61-1268-39 MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ7.0 Blade length 16mm) MSMHZDD0700
Fitur
- This series uses MS coating to realize cost performance.
- It can process a wide range of raw materials, high hardness steel (about 50 HRC) and difficult-to-cut materials.
- Processing from vertical feed to grooving can be done in one go, reducing processing time.
- By adopting a unique gash shape and a new groove shape, we have achieved improved chip expulsion.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel, etc.
Spec
- Diameter pedang (mm): 7,0
- panjang bilah (mm): 16
- Panjang (mm): 60
- Diameter gula (mm): 8
- Permukaan perawatan: (Al, Ti) N coating (MS)
- sekrup 45°
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Baja karbon, baja paduan, baja hardened, baja Stainless.
- Negara asal: Jepang
- Nomor model produsen: MSMHZD0700
- KODE No.: 689-0890
Ukuran paket：11×66×13 mm 40 g [Tentang Ukuran Paket]
| Perintah No. | 61-1268-39 | |
|---|---|---|
| Model No. | MSMHZDD0700 | |
| Kode JAN | 4994196405113 | |
| Harga standar |
JPY: 10,160
USD: 63.69
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1268-27 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, × Blade length 2mm) MSMHZDD0100 | MSMHZDD0100 | 1.0mm | 2.0mm | 1piece | JPY: 4,600 | USD: 28.84 |
|
|
 |
61-1268-28 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ1.5 Blade length 3mm) MSMHZDD0150 | MSMHZDD0150 | 1.5mm | 3.0mm | 1piece | JPY: 4,600 | USD: 28.84 |
|
|
 |
61-1268-29 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ2.0 Blade length 4mm) MSMHZDD0200 | MSMHZDD0200 | 2.0mm | 4.0mm | 1piece | JPY: 4,470 | USD: 28.02 |
|
|
 |
61-1268-30 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, × Blade length 5mm) MSMHZDD0250 | MSMHZDD0250 | 2.5mm | 5.0mm | 1piece | JPY: 4,470 | USD: 28.02 |
|
|
 |
61-1268-31 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ3.0 Blade length 6mm) MSMHZDD0300 | MSMHZDD0300 | 3.0mm | 6.0mm | 1piece | JPY: 5,300 | USD: 33.22 |
|
|
 |
61-1268-32 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, × Blade length 8mm) MSMHZDD0350 | MSMHZDD0350 | 3.5mm | 8.0mm | 1piece | JPY: 6,670 | USD: 41.81 |
|
|
 |
61-1268-33 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, × Blade length 8mm) MSMHZDD0400 | MSMHZDD0400 | 4.0mm | 8.0mm | 1piece | JPY: 5,800 | USD: 36.36 |
|
|
 |
61-1268-34 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ4.5 Blade length 10mm) MSMHZDD0450 | MSMHZDD0450 | 4.5mm | 10.0mm | 1piece | JPY: 7,110 | USD: 44.57 |
|
|
 |
61-1268-35 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ5.0 Blade length 10mm) MSMHZDD0500 | MSMHZDD0500 | 5.0mm | 10.0mm | 1piece | JPY: 6,230 | USD: 39.05 |
|
|
 |
61-1268-36 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ5.5 Blade length 13mm) MSMHZDD0550 | MSMHZDD0550 | 5.5mm | 13.0mm | 1piece | JPY: 7,380 | USD: 46.26 |
|
|
 |
61-1268-37 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ6.0 Blade length 13mm) MSMHZDD0600 | MSMHZDD0600 | 6.0mm | 13.0mm | 1piece | JPY: 6,440 | USD: 40.37 |
|
|
 |
61-1268-38 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ6.5 Blade length 16mm) MSMHZDD0650 | MSMHZDD0650 | 6.5mm | 16.0mm | 1piece | JPY: 11,700 | USD: 73.34 |
|
|
 |
61-1268-39 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ7.0 Blade length 16mm) MSMHZDD0700 | MSMHZDD0700 | 7.0mm | 16.0mm | 1piece | JPY: 10,160 | USD: 63.69 |
|
|
 |
61-1268-40 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ7.5 Blade length 16mm) MSMHZDD0750 | MSMHZDD0750 | 7.5mm | 16.0mm | 1piece | JPY: 11,700 | USD: 73.34 |
|
|
 |
61-1268-41 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ8.0 Blade length 19mm) MSMHZDD0800 | MSMHZDD0800 | 8.0mm | 19.0mm | 1piece | JPY: 10,160 | USD: 63.69 |
|
|
 |
61-1268-42 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ8.5 Blade length 19mm) MSMHZDD0850 | MSMHZDD0850 | 8.5mm | 19.0mm | 1piece | JPY: 13,650 | USD: 85.56 |
|
|
 |
61-1268-43 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, × Blade panjang 19mm) MSMHZDD0900 | MSMHZDD0900 | 9.0mm | 19.0mm | 1piece | JPY: 11,870 | USD: 74.41 |
|
|
 |
61-1268-44 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ9.5 Blade length 19mm) MSMHZDD0950 | MSMHZDD0950 | 9.5mm | 19.0mm | 1piece | JPY: 13,650 | USD: 85.56 |
|
|
 |
61-1268-45 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ10.0 Blade length 22mm) MSMHZDD1000 | MSMHZDD1000 | 10.0mm | 22.0mm | 1piece | JPY: 11,870 | USD: 74.41 |
|
|
 |
61-1268-46 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ11.0 Blade length 22mm) MSMHZDD1100 | MSMHZDD1100 | 11.0mm | 22.0mm | 1piece | JPY: 17,470 | USD: 109.51 |
|
|
 |
61-1268-47 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ12.0 Blade length 26mm) MSMHZDD1200 | MSMHZDD1200 | 12.0mm | 26.0mm | 1piece | JPY: 17,470 | USD: 109.51 |
|
|
 |
61-1268-48 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ13 Blade length 26mm) MSMHZDD1300 | MSMHZDD1300 | 13.0mm | 26.0mm | 1piece | JPY: 22,020 | USD: 138.03 |
|
|
 |
61-1268-49 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ14.0 Blade length 26mm) MSMHZDD1400 | MSMHZDD1400 | 14.0mm | 26.0mm | 1piece | JPY: 24,140 | USD: 151.32 |
|
|
 |
61-1268-50 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ15 Blade length 26mm) MSMHZDD1500 | MSMHZDD1500 | 15.0mm | 26.0mm | 1piece | JPY: 30,640 | USD: 192.06 |
|
|
 |
61-1268-51 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ16.0 Blade length 30mm) MSMHZDD1600 | MSMHZDD1600 | 16.0mm | 30.0mm | 1piece | JPY: 36,400 | USD: 228.17 |
|
|
 |
61-1268-52 | MSTAR Carbide Endmill (MSMZHD, 3 Blades, Tujuan Umum, 45 Derajat, Φ20.0 Blade length 32mm) MSMHZDD2000 | MSMHZDD2000 | 20.0mm | 32.0mm | 1piece | JPY: 55,090 | USD: 345.33 |
|