61-1259-21 ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ7.0 Blade Length Length: 40mm) C2LSD0700
Fitur
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
Spec
- Diameter pedang (mm): 7,0
- panjang bilah (mm): 40
- Panjang (mm): 90
- Diameter gula (mm): 8
- Tanpa Pengkodean
- sekrup 30°
- sematkan Tipe Kado
- Lembar tengah: dengan
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Baja umum menggunakan baja, Casting, aluminium paduan Titanium, paduan resistensi Heat, paduan tembaga.
- Negara asal: Jepang
- Nomor model produsen: C2LSD0700
- KODE No.: 107-8143
| Perintah No. | 61-1259-21 | |
|---|---|---|
| Model No. | C2LSD0700 | |
| Kode JAN | 4994196410117 | |
| Harga standar |
JPY: 17,956
USD: 112.56
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
|
||
| Saham di Jepang | - | |
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1259-10 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ1.5 Blade Length Length: 6 mm) C2LSD0150 | C2LSD0150 | 1.5mm | 6.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-11 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ2.0 Blade Length Length: 9mm) C2LSD0200 | C2LSD0200 | 2.0mm | 9.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-12 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ2.5 Blade Length Length: 12mm) C2LSD0250 | C2LSD0250 | 2.5mm | 12.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-13 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ3.0 Blade Length Length: 20mm) C2LSD0300 | C2LSD0300 | 3.0mm | 20.0mm | 1piece | JPY: 10,156 | USD: 63.66 |
-
|
|
 |
61-1259-14 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ3.5 Blade Length Length: 22mm) C2LSD0350 | C2LSD0350 | 3.5mm | 22.0mm | 1piece | JPY: 11,213 | USD: 70.29 |
-
|
|
 |
61-1259-15 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ4.0 Blade Length Length: 25mm) C2LSD0400 | C2LSD0400 | 4.0mm | 25.0mm | 1piece | JPY: 11,213 | USD: 70.29 |
-
|
|
 |
61-1259-17 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ5.0 Blade Length Length: 30mm) C2LSD0500 | C2LSD0500 | 5.0mm | 30.0mm | 1piece | JPY: 12,513 | USD: 78.44 |
-
|
|
 |
61-1259-18 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ5.5 Blade Length Length: 30mm) C2LSD0550 | C2LSD0550 | 5.5mm | 30.0mm | 1piece | JPY: 13,731 | USD: 86.07 |
-
|
|
 |
61-1259-19 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ6.0 Blade Length Length: 30mm) C2LSD0600 | C2LSD0600 | 6.0mm | 30.0mm | 1piece | JPY: 13,731 | USD: 86.07 |
-
|
|
 |
61-1259-20 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ6.5 Blade Length Length: 30mm) C2LSD0650 | C2LSD0650 | 6.5mm | 30.0mm | 1piece | JPY: 17,956 | USD: 112.56 |
-
|
|
 |
61-1259-21 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ7.0 Blade Length Length: 40mm) C2LSD0700 | C2LSD0700 | 7.0mm | 40.0mm | 1piece | JPY: 17,956 | USD: 112.56 |
-
|
|
 |
61-1259-23 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ8.0 Blade Length Length: 40mm) C2LSD0800 | C2LSD0800 | 8.0mm | 40.0mm | 1piece | JPY: 19,988 | USD: 125.29 |
-
|
|
 |
61-1259-24 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ8.5 Blade Length Length: 40mm) C2LSD0850 | C2LSD0850 | 8.5mm | 40.0mm | 1piece | JPY: 24,619 | USD: 154.32 |
-
|
|
 |
61-1259-25 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ9.0 Blade Length Length: 40mm) C2LSD0900 | C2LSD0900 | 9.0mm | 40.0mm | 1piece | JPY: 24,619 | USD: 154.32 |
-
|
|
 |
61-1259-27 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ10.0 Blade Length Length: 50mm) C2LSD1000 | C2LSD1000 | 10.0mm | 50.0mm | 1piece | JPY: 25,513 | USD: 159.93 |
-
|
|
 |
61-1259-29 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ11.0 Blade Length Length: 50mm) C2LSD1100 | C2LSD1100 | 11.0mm | 50.0mm | 1piece | JPY: 28,763 | USD: 180.30 |
-
|
|
 |
61-1259-33 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ13.0 Blade Length Length: 50mm) C2LSD1300 | C2LSD1300 | 13.0mm | 50.0mm | 1piece | JPY: 35,750 | USD: 224.10 |
-
|
|
 |
61-1259-34 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ14.0 Blade Length Length: 70mm) C2LSD1400 | C2LSD1400 | 14.0mm | 70.0mm | 1piece | JPY: 49,075 | USD: 307.62 |
-
|
|
 |
61-1259-35 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ15.0 Blade Length Length: 70mm) C2LSD1500 | C2LSD1500 | 15.0mm | 70.0mm | 1piece | JPY: 50,700 | USD: 317.81 |
-
|
|
 |
61-1259-37 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ17.0 Blade Length Length: 70mm) C2LSD1700 | C2LSD1700 | 17.0mm | 70.0mm | 1piece | JPY: 82,063 | USD: 514.41 |
-
|
|
 |
61-1259-38 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ18.0 Blade Length Length: 70mm) C2LSD1800 | C2LSD1800 | 18.0mm | 70.0mm | 1piece | JPY: 82,063 | USD: 514.41 |
-
|
|
 |
61-1259-40 | ［Dihentikan］Carbide Enmill (Panjang, 2 Blades, Non-coated, C2LS, Φ20.0 Blade Length Length: 70mm) C2LSD2000 | C2LSD2000 | 20.0mm | 70.0mm | 1piece | JPY: 86,938 | USD: 544.96 |
-
|