61-1257-13 MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N300
Fitur
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
Spec
- Diameter pedang (mm): 2,0
- panjang bilah (mm): 3,0
- Panjang (mm): 70
- Diameter gula (mm): 4
- panjang di bawah kepala (mm): 30
- Permukaan perawatan: (Al, Ti) N coating (MS)
- sekrup adalah sudut 30°
- Lembar tengah: dengan
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Baja karbon, baja logam paduan, baja lebat, baja Stainless (austenitic), logam resistensi Heat.
- Negara asal: Jepang
- Nomor model produsen: MS2XLD0200N300
- KODE No.: 671-4943
Ukuran paket：13×85×12 mm 10 g [Tentang Ukuran Paket]
| Perintah No. | 61-1257-13 | |
|---|---|---|
| Model No. | MS2XLD0200N300 | |
| Kode JAN | 4994196377595 | |
| Harga standar |
JPY: 4,600
USD: 28.84
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1256-67 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.2 Blade Length Length Length Length Length: 0,3 mm) MS2XLD0020N010 | MS2XLD0020N010 | 0.2mm | 0.3mm | 1piece | JPY: 7,950 | USD: 49.83 |
|
|
 |
61-1256-68 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.3 Blade Length Length Length Length Length: 0,4 mm) MS2XLD0030N010 | MS2XLD0030N010 | 0.3mm | 0.4mm | 1piece | JPY: 6,340 | USD: 39.74 |
|
|
 |
61-1256-69 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.3 Blade Length Length Length Length Length: 0,4 mm) MS2XLD0030N060 | MS2XLD0030N060 | 0.3mm | 0.4mm | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-1256-70 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.4 Blade Length Length Length Length Length: 0,6 mm) MS2XLD0040N020 | MS2XLD0040N020 | 0.4mm | 0.6mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1256-71 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.4 Blade Length Length Length Length Length: 0,6 mm) MS2XLD0040N040 | MS2XLD0040N040 | 0.4mm | 0.6mm | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1256-72 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.5 Blade Length Length Length Length Length: 0,7 mm) MS2XLD0050N020 | MS2XLD0050N020 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-73 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.5 Blade Length Length Length Length Length: 0,7 mm) MS2XLD0050N040 | MS2XLD0050N040 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-74 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.5 Blade Length Length Length Length Length: 0,7 mm) MS2XLD0050N060 | MS2XLD0050N060 | 0.5mm | 0.7mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-75 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.5 Blade Length Length Length Length Length: 0,7 mm) MS2XLD0050N100 | MS2XLD0050N100 | 0.5mm | 0.7mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-76 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.6 Blade Length Length Length Length Length: 0,9 mm) MS2XLD0060N020 | MS2XLD0060N020 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-77 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.6 Blade Length Length Length Length Length: 0,9 mm) MS2XLD0060N040 | MS2XLD0060N040 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-78 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.6 Blade Length Length Length Length Length: 0,9 mm) MS2XLD0060N060 | MS2XLD0060N060 | 0.6mm | 0.9mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-79 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.6 Blade Length Length Length Length Length: 0,9 mm) MS2XLD0060N080 | MS2XLD0060N080 | 0.6mm | 0.9mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-80 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.6 Blade Length Length Length Length Length: 0,9 mm) MS2XLD0060N100 | MS2XLD0060N100 | 0.6mm | 0.9mm | 1piece | JPY: 6,970 | USD: 43.69 |
|
|
 |
61-1256-81 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.7 Blade Length Length Length Length Length: 1,0mm) MS2XLD0070N020 | MS2XLD0070N020 | 0.7mm | 1.0mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-82 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.7 Blade Length Length Length Length Length: 1,0mm) MS2XLD0070N040 | MS2XLD0070N040 | 0.7mm | 1.0mm | 1piece | JPY: 3,350 | USD: 21.00 |
|
|
 |
61-1256-83 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.7 Blade Length Length Length Length Length: 1,0mm) MS2XLD0070N080 | MS2XLD0070N080 | 0.7mm | 1.0mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1256-84 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.8 Blade Length Length Length Length Length: 1,2 mm) MS2XLD0080N040 | MS2XLD0080N040 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-85 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.8 Blade Length Length Length Length Length: 1,2 mm) MS2XLD0080N060 | MS2XLD0080N060 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-86 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.8 Blade Length Length Length Length Length: 1,2 mm) MS2XLD0080N080 | MS2XLD0080N080 | 0.8mm | 1.2mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-87 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.8 Blade Length Length Length Length Length: 1,2 mm) MS2XLD0080N100 | MS2XLD0080N100 | 0.8mm | 1.2mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-88 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ0.9 Blade Length Length Length Length Length: 1,4 mm) MS2XLD0090N060 | MS2XLD0090N060 | 0.9mm | 1.4mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1256-89 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N040 | MS2XLD0100N040 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-90 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N060 | MS2XLD0100N060 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-91 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N080 | MS2XLD0100N080 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-92 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N100 | MS2XLD0100N100 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-93 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N120 | MS2XLD0100N120 | 1.0mm | 1.5mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-94 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N200 | MS2XLD0100N200 | 1.0mm | 1.5mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-95 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.0 Blade Length Length Length Length Length: 1,5 mm) MS2XLD0100N250 | MS2XLD0100N250 | 1.0mm | 1.5mm | 1piece | JPY: 6,290 | USD: 39.43 |
|
|
 |
61-1256-96 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.2 Blade Length Length Length Length Length: 1,8 mm) MS2XLD0120N080 | MS2XLD0120N080 | 1.2mm | 1.8mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-97 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.2 Blade Length Length Length Length Length: 1,8 mm) MS2XLD0120N120 | MS2XLD0120N120 | 1.2mm | 1.8mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-98 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N060 | MS2XLD0150N060 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1256-99 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N080 | MS2XLD0150N080 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-01 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N100 | MS2XLD0150N100 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-02 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N120 | MS2XLD0150N120 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-03 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N140 | MS2XLD0150N140 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-04 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N200 | MS2XLD0150N200 | 1.5mm | 2.3mm | 1piece | JPY: 3,620 | USD: 22.69 |
|
|
 |
61-1257-05 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ1.5 Blade Length Length Length Length Length: 2,3 mm) MS2XLD0150N250 | MS2XLD0150N250 | 1.5mm | 2.3mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1257-06 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N060 | MS2XLD0200N060 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-07 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N080 | MS2XLD0200N080 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-08 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N100 | MS2XLD0200N100 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-09 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N120 | MS2XLD0200N120 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-10 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N160 | MS2XLD0200N160 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-11 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N180 | MS2XLD0200N180 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-12 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N250 | MS2XLD0200N250 | 2.0mm | 3.0mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1257-13 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.0 Blade Length Length Length Length Length: 3,0 mm) MS2XLD0200N300 | MS2XLD0200N300 | 2.0mm | 3.0mm | 1piece | JPY: 4,600 | USD: 28.84 |
|
|
 |
61-1257-14 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ2.5 Blade Length Length Length Length Length: 3,7 mm) MS2XLD0250N120 | MS2XLD0250N120 | 2.5mm | 3.7mm | 1piece | JPY: 3,770 | USD: 23.63 |
|
|
 |
61-1257-15 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N120 | MS2XLD0300N120 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-16 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N160 | MS2XLD0300N160 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-17 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N200 | MS2XLD0300N200 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-18 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N250 | MS2XLD0300N250 | 3.0mm | 4.5mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1257-19 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N300 | MS2XLD0300N300 | 3.0mm | 4.5mm | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
61-1257-20 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N400 | MS2XLD0300N400 | 3.0mm | 4.5mm | 1piece | JPY: 6,000 | USD: 37.61 |
|
|
 |
61-1257-21 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ3.0 Blade Length Length Length Length Length: 4,5 mm) MS2XLD0300N500 | MS2XLD0300N500 | 3.0mm | 4.5mm | 1piece | JPY: 8,370 | USD: 52.47 |
|
|
 |
61-1257-22 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N160 | MS2XLD0400N160 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-23 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N200 | MS2XLD0400N200 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-24 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N250 | MS2XLD0400N250 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-25 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N300 | MS2XLD0400N300 | 4.0mm | 6.0mm | 1piece | JPY: 5,860 | USD: 36.73 |
|
|
 |
61-1257-26 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N400 | MS2XLD0400N400 | 4.0mm | 6.0mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-27 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N500 | MS2XLD0400N500 | 4.0mm | 6.0mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-28 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ4.0 Blade Length Length Length Length Length: 6,0 mm) MS2XLD0400N600 | MS2XLD0400N600 | 4.0mm | 6.0mm | 1piece | JPY: 12,760 | USD: 79.99 |
|
|
 |
61-1257-29 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ5.0 Blade Length Length Length Length Length: 7,5 mm) MS2XLD0500N250 | MS2XLD0500N250 | 5.0mm | 7.5mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-30 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ5.0 Blade Length Length Length Length Length: 7,5 mm) MS2XLD0500N350 | MS2XLD0500N350 | 5.0mm | 7.5mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-31 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ5.0 Blade Length Length Length Length Length: 7,5 mm) MS2XLD0500N500 | MS2XLD0500N500 | 5.0mm | 7.5mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-32 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ5.0 Blade Length Length Length Length Length: 7,5 mm) MS2XLD0500N600 | MS2XLD0500N600 | 5.0mm | 7.5mm | 1piece | JPY: 12,760 | USD: 79.99 |
|
|
 |
61-1257-33 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ6.0 Blade Length Length Length Length Length: 9,0 mm) MS2XLD0600N300 | MS2XLD0600N300 | 6.0mm | 9.0mm | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1257-34 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ6.0 Blade Length Length Length Length Length: 9,0 mm) MS2XLD0600N400 | MS2XLD0600N400 | 6.0mm | 9.0mm | 1piece | JPY: 8,780 | USD: 55.04 |
|
|
 |
61-1257-35 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ6.0 Blade Length Length Length Length Length: 9,0 mm) MS2XLD0600N500 | MS2XLD0600N500 | 6.0mm | 9.0mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1257-36 | MSTAR Carbide Small diameter Endmill (MS2XL, Tujuan Umum, 2 Blades, Φ6.0 Blade Length Length Length Length Length: 9,0 mm) MS2XLD0600N600 | MS2XLD0600N600 | 6.0mm | 9.0mm | 1piece | JPY: 13,250 | USD: 83.06 |
|