61-1256-49 MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.3 Blade: 1,2 mm) MS2LSD0030
Fitur
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel (about 50 HRC) and difficult-to-cut materials.
- Generic 2-Flute Long Flute Square End Mill.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
Spec
- Diameter pedang (mm): 0,3
- panjang bilah (mm): 1,2
- Panjang (mm): 40
- Diameter gula (mm): 4
- Jumlah pedang: 2
- 2 pisau panjang Persegi panjang
- Permukaan perawatan: (Al, Ti) N coating (MS)
- sekrup 30°
- Lembar tengah: dengan
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Baja karbon, baja logam paduan, baja lebat, baja Stainless (austenitic), logam resistensi Heat.
- Negara asal: Jepang
- Nomor model produsen: MS2LSD0030
- KODE No.: 657-7300
Ukuran paket：69×25×12 mm 20 g [Tentang Ukuran Paket]
| Perintah No. | 61-1256-49 | |
|---|---|---|
| Model No. | MS2LSD0030 | |
| Kode JAN | 4994196465001 | |
| Harga standar |
JPY: 5,580
USD: 34.98
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1256-48 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.2 Blade: 0,8 mm) MS2LSD0020 | MS2LSD0020 | 0.2mm | 0.8mm | 1piece | JPY: 6,830 | USD: 42.81 |
|
|
 |
61-1256-49 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.3 Blade: 1,2 mm) MS2LSD0030 | MS2LSD0030 | 0.3mm | 1.2mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-50 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.4 Blade: 1,6 mm) MS2LSD0040 | MS2LSD0040 | 0.4mm | 1.6mm | 1piece | JPY: 5,580 | USD: 34.98 |
|
|
 |
61-1256-51 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.5 Blade: 2mm) MS2LSD0050 | MS2LSD0050 | 0.5mm | 2.0mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-52 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.6 Blade: 2,4 mm) MS2LSD0060 | MS2LSD0060 | 0.6mm | 2.4mm | 1piece | JPY: 3,220 | USD: 20.18 |
|
|
 |
61-1256-53 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.7 Blade: 0,8 mm) MS2LSD0070 | MS2LSD0070 | 0.7mm | 0.8mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-54 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.8 Blade: 3,2 mm) MS2LSD0080 | MS2LSD0080 | 0.8mm | 3.2mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-55 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ0.9 Blade: 3,6 mm) MS2LSD0090 | MS2LSD0090 | 0.9mm | 3.6mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1256-56 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ1 Blade: 4 mm) MS2LSD0100 | MS2LSD0100 | 1.0mm | 4.0mm | 1piece | JPY: 3,140 | USD: 19.68 |
|
|
 |
61-1256-57 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ1.5 Blade: 6 mm) MS2LSD0150 | MS2LSD0150 | 1.5mm | 6.0mm | 1piece | JPY: 3,140 | USD: 19.68 |
|
|
 |
61-1256-58 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ2 Blade: 8mm MS2LSD0200 | MS2LSD0200 | 2.0mm | 8.0mm | 1piece | JPY: 3,140 | USD: 19.68 |
|
|
 |
61-1256-59 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ2.5 Blade: 10mm) MS2LSD0250 | MS2LSD0250 | 2.5mm | 10.0mm | 1piece | JPY: 3,140 | USD: 19.68 |
|
|
 |
61-1256-60 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ3 Blade: 12mm) MS2LSD0300 | MS2LSD0300 | 3.0mm | 12.0mm | 1piece | JPY: 3,950 | USD: 24.76 |
|
|
 |
61-1256-61 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ4 Blade: 16 mm) MS2LSD0400 | MS2LSD0400 | 4.0mm | 16.0mm | 1piece | JPY: 4,240 | USD: 26.58 |
|
|
 |
61-1256-62 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ5 Blade: 20mm) MS2LSD0500 | MS2LSD0500 | 5.0mm | 20.0mm | 1piece | JPY: 4,810 | USD: 30.15 |
|
|
 |
61-1256-63 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, Panjang Φ6 Blade: 24 mm) MS2LSD0600 | MS2LSD0600 | 6.0mm | 24.0mm | 1piece | JPY: 4,870 | USD: 30.53 |
|
|
 |
61-1256-64 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ8 Blade: 32mm) MS2LSD0800 | MS2LSD0800 | 8.0mm | 32.0mm | 1piece | JPY: 10,650 | USD: 66.76 |
|
|
 |
61-1256-65 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ10 Blade: 40mm) MS2LSD1000 | MS2LSD1000 | 10.0mm | 40.0mm | 1piece | JPY: 12,190 | USD: 76.41 |
|
|
 |
61-1256-66 | MSTAR Carbide Enmill (MS2LS, Tujuan Umum, 2 Blades, panjang pedang panjang, panjang Φ12 Blade: 48 mm) MS2LSD1200 | MS2LSD1200 | 12.0mm | 48.0mm | 1piece | JPY: 20,070 | USD: 125.81 |
|