61-1256-13 MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ6.5: 13 mm) MS2MSD0650
Fitur
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Universal 2-Flute Middle-Flute Length Square End Mill.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
Spec
- Diameter pedang (mm): 6,5
- panjang bilah (mm): 13
- Panjang (mm): 60
- Diameter gula (mm): 8
- Jumlah pedang: 2
- 2 pedang Square
- Permukaan perawatan: (Al, Ti) N coating (MS)
- sekrup 30°
- Lembar tengah: dengan
- partikel ultrafine kutub sedisemen carbide (UWC)
- Aplikasi: bagian kerja: Baja karbon, baja logam paduan, baja lebat, baja Stainless (austenitic), logam resistensi Heat.
- Negara asal: Jepang
- Nomor model produsen: MS2MSD0650
- KODE No.: 657-7750
Ukuran paket：67×52×12 mm 40 g [Tentang Ukuran Paket]
| Perintah No. | 61-1256-13 | |
|---|---|---|
| Model No. | MS2MSD0650 | |
| Kode JAN | 4994196423728 | |
| Harga standar |
JPY: 8,370
USD: 52.47
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. |
Blade diameter |
Blade length |
Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1255-53 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.2: 0,4 mm) MS2MSD0020 | MS2MSD0020 | 0.2mm | 0.4mm | 1piece | JPY: 4,250 | USD: 26.64 |
|
|
 |
61-1255-54 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.3: 0,6 mm) MS2MSD0030 | MS2MSD0030 | 0.3mm | 0.6mm | 1piece | JPY: 3,700 | USD: 23.19 |
|
|
 |
61-1255-55 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.4: 0,8 mm) MS2MSD0040 | MS2MSD0040 | 0.4mm | 0.8mm | 1piece | JPY: 4,120 | USD: 25.83 |
|
|
 |
61-1255-56 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.5: 1,0mm) MS2MSD0050 | MS2MSD0050 | 0.5mm | 1.0mm | 1piece | JPY: 2,030 | USD: 12.73 |
|
|
 |
61-1255-57 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.6: 1,2 mm) MS2MSD0060 | MS2MSD0060 | 0.6mm | 1.2mm | 1piece | JPY: 3,220 | USD: 20.18 |
|
|
 |
61-1255-58 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.7: 1,4 mm) MS2MSD0070 | MS2MSD0070 | 0.7mm | 1.4mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1255-59 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.8: 1,6 mm) MS2MSD0080 | MS2MSD0080 | 0.8mm | 1.6mm | 1piece | JPY: 2,030 | USD: 12.73 |
|
|
 |
61-1255-60 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ0.9: 1,8 mm) MS2MSD0090 | MS2MSD0090 | 0.9mm | 1.8mm | 1piece | JPY: 3,480 | USD: 21.81 |
|
|
 |
61-1255-61 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.0: 2,0mm) MS2MSD0100 | MS2MSD0100 | 1.0mm | 2.0mm | 1piece | JPY: 1,820 | USD: 11.41 |
|
|
 |
61-1255-62 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.1: 2,2 mm) MS2MSD0110 | MS2MSD0110 | 1.1mm | 2.2mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-63 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.2: 2,4 mm) MS2MSD0120 | MS2MSD0120 | 1.2mm | 2.4mm | 1piece | JPY: 2,030 | USD: 12.73 |
|
|
 |
61-1255-64 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.3: 2,6 mm) MS2MSD0130 | MS2MSD0130 | 1.3mm | 2.6mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-65 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.4: 2,8 mm) MS2MSD0140 | MS2MSD0140 | 1.4mm | 2.8mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-66 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.5: 3,0 mm) MS2MSD0150 | MS2MSD0150 | 1.5mm | 3.0mm | 1piece | JPY: 1,820 | USD: 11.41 |
|
|
 |
61-1255-67 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.6: 3,2 mm) MS2MSD0160 | MS2MSD0160 | 1.6mm | 3.2mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-68 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.7: 3,4 mm) MS2MSD0170 | MS2MSD0170 | 1.7mm | 3.4mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-69 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.8: 3,6 mm) MS2MSD0180 | MS2MSD0180 | 1.8mm | 3.6mm | 1piece | JPY: 2,030 | USD: 12.73 |
|
|
 |
61-1255-70 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ1.9: 3,8 mm) MS2MSD0190 | MS2MSD0190 | 1.9mm | 3.8mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-71 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.0: 4,0 mm) MS2MSD0200 | MS2MSD0200 | 2.0mm | 4.0mm | 1piece | JPY: 1,820 | USD: 11.41 |
|
|
 |
61-1255-72 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.1: 4,2 mm) MS2MSD0210 | MS2MSD0210 | 2.1mm | 4.2mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-73 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.2: 4,4 mm) MS2MSD0220 | MS2MSD0220 | 2.2mm | 4.4mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-74 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.3: 4,6 mm) MS2MSD0230 | MS2MSD0230 | 2.3mm | 4.6mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-75 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.4: 4,8 mm) MS2MSD0240 | MS2MSD0240 | 2.4mm | 4.8mm | 1piece | JPY: 5,170 | USD: 32.41 |
|
|
 |
61-1255-76 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.5: 5,0 mm) MS2MSD0250 | MS2MSD0250 | 2.5mm | 5.0mm | 1piece | JPY: 1,820 | USD: 11.41 |
|
|
 |
61-1255-77 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.6: 5,2 mm) MS2MSD0260 | MS2MSD0260 | 2.6mm | 5.2mm | 1piece | JPY: 6,700 | USD: 42.00 |
|
|
 |
61-1255-78 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.7: 5,4 mm) MS2MSD0270 | MS2MSD0270 | 2.7mm | 5.4mm | 1piece | JPY: 6,700 | USD: 42.00 |
|
|
 |
61-1255-79 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.8: 5,6 mm) MS2MSD0280 | MS2MSD0280 | 2.8mm | 5.6mm | 1piece | JPY: 6,700 | USD: 42.00 |
|
|
 |
61-1255-80 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ2.9: 5,8 mm) MS2MSD0290 | MS2MSD0290 | 2.9mm | 5.8mm | 1piece | JPY: 6,700 | USD: 42.00 |
|
|
 |
61-1255-81 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.0: 6,0 mm) MS2MSD0300 | MS2MSD0300 | 3.0mm | 6.0mm | 1piece | JPY: 2,390 | USD: 14.98 |
|
|
 |
61-1255-82 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.1: 6,2 mm) MS2MSD0310 | MS2MSD0310 | 3.1mm | 6.2mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-83 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.2: 6,4 mm) MS2MSD0320 | MS2MSD0320 | 3.2mm | 6.4mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-84 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.3: 6,6 mm) MS2MSD0330 | MS2MSD0330 | 3.3mm | 6.6mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-85 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.4: 6,8 mm) MS2MSD0340 | MS2MSD0340 | 3.4mm | 6.8mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-86 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.5: 7mm) MS2MSD0350 | MS2MSD0350 | 3.5mm | 7.0mm | 1piece | JPY: 4,240 | USD: 26.58 |
|
|
 |
61-1255-87 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.6: 7,2 mm) MS2MSD0360 | MS2MSD0360 | 3.6mm | 7.2mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-88 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.7: 7,4 mm) MS2MSD0370 | MS2MSD0370 | 3.7mm | 7.4mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-89 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.8: 7,6 mm) MS2MSD0380 | MS2MSD0380 | 3.8mm | 7.6mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-90 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ3.9: 7,8 mm) MS2MSD0390 | MS2MSD0390 | 3.9mm | 7.8mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-91 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.0: 8,0 mm) MS2MSD0400 | MS2MSD0400 | 4.0mm | 8.0mm | 1piece | JPY: 2,650 | USD: 16.61 |
|
|
 |
61-1255-92 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.1: 8,2 mm) MS2MSD0410 | MS2MSD0410 | 4.1mm | 8.2mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-93 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.2: 8,4 mm) MS2MSD0420 | MS2MSD0420 | 4.2mm | 8.4mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-94 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.3: 8,6 mm) MS2MSD0430 | MS2MSD0430 | 4.3mm | 8.6mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-95 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.4: 8,8 mm) MS2MSD0440 | MS2MSD0440 | 4.4mm | 8.8mm | 1piece | JPY: 7,020 | USD: 44.00 |
|
|
 |
61-1255-96 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.5: 9mm) MS2MSD0450 | MS2MSD0450 | 4.5mm | 9.0mm | 1piece | JPY: 5,130 | USD: 32.16 |
|
|
 |
61-1255-97 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.6: 9,2 mm) MS2MSD0460 | MS2MSD0460 | 4.6mm | 9.2mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1255-98 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.7: 9,4 mm) MS2MSD0470 | MS2MSD0470 | 4.7mm | 9.4mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1255-99 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.8: 9,6 mm) MS2MSD0480 | MS2MSD0480 | 4.8mm | 9.6mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-01 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ4.9: 9,8 mm) MS2MSD0490 | MS2MSD0490 | 4.9mm | 9.8mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-02 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.0: 10,0mm) MS2MSD0500 | MS2MSD0500 | 5.0mm | 10.0mm | 1piece | JPY: 2,780 | USD: 17.43 |
|
|
 |
61-1256-03 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.1: 10,2 mm) MS2MSD0510 | MS2MSD0510 | 5.1mm | 10.2mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-04 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.2: 10,4 mm) MS2MSD0520 | MS2MSD0520 | 5.2mm | 10.4mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-05 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.3: 10,6 mm) MS2MSD0530 | MS2MSD0530 | 5.3mm | 10.6mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-06 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.4: 10,8 mm) MS2MSD0540 | MS2MSD0540 | 5.4mm | 10.8mm | 1piece | JPY: 7,990 | USD: 50.09 |
|
|
 |
61-1256-07 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.5: 11mm) MS2MSD0550 | MS2MSD0550 | 5.5mm | 11.0mm | 1piece | JPY: 4,900 | USD: 30.72 |
|
|
 |
61-1256-08 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.6: 11,2 mm) MS2MSD0560 | MS2MSD0560 | 5.6mm | 11.2mm | 1piece | JPY: 8,290 | USD: 51.97 |
|
|
 |
61-1256-09 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.7: 11,4 mm) MS2MSD0570 | MS2MSD0570 | 5.7mm | 11.4mm | 1piece | JPY: 8,290 | USD: 51.97 |
|
|
 |
61-1256-10 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.8: 11,6 mm) MS2MSD0580 | MS2MSD0580 | 5.8mm | 11.6mm | 1piece | JPY: 8,290 | USD: 51.97 |
|
|
 |
61-1256-11 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ5.9: 11,8 mm) MS2MSD0590 | MS2MSD0590 | 5.9mm | 11.8mm | 1piece | JPY: 8,290 | USD: 51.97 |
|
|
 |
61-1256-12 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ6.0: 12,0 mm) MS2MSD0600 | MS2MSD0600 | 6.0mm | 12.0mm | 1piece | JPY: 3,080 | USD: 19.31 |
|
|
 |
61-1256-13 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ6.5: 13 mm) MS2MSD0650 | MS2MSD0650 | 6.5mm | 13.0mm | 1piece | JPY: 8,370 | USD: 52.47 |
|
|
 |
61-1256-14 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang pedang Sedang, Panjang Hitam ×: 14 mm) MS2MSD0700 | MS2MSD0700 | 7.0mm | 14.0mm | 1piece | JPY: 7,830 | USD: 49.08 |
|
|
 |
61-1256-15 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ7.5: 15mm) MS2MSD0750 | MS2MSD0750 | 7.5mm | 15.0mm | 1piece | JPY: 9,270 | USD: 58.11 |
|
|
 |
61-1256-16 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ8.0: 16,0 mm) MS2MSD0800 | MS2MSD0800 | 8.0mm | 16.0mm | 1piece | JPY: 6,320 | USD: 39.62 |
|
|
 |
61-1256-17 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ8.5: 17 mm) MS2MSD0850 | MS2MSD0850 | 8.5mm | 17.0mm | 1piece | JPY: 11,220 | USD: 70.33 |
|
|
 |
61-1256-18 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ9: 18mm) MS2MSD0900 | MS2MSD0900 | 9.0mm | 18.0mm | 1piece | JPY: 11,220 | USD: 70.33 |
|
|
 |
61-1256-19 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ9.5: 19 mm) MS2MSD0950 | MS2MSD0950 | 9.5mm | 19.0mm | 1piece | JPY: 11,540 | USD: 72.34 |
|
|
 |
61-1256-20 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ10.0: 20,0mm) MS2MSD1000 | MS2MSD1000 | 10.0mm | 20.0mm | 1piece | JPY: 7,470 | USD: 46.83 |
|
|
 |
61-1256-21 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ11: 22mm) MS2MSD1100 | MS2MSD1100 | 11.0mm | 22.0mm | 1piece | JPY: 15,360 | USD: 96.28 |
|
|
 |
61-1256-22 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ12.0: 24,0 mm) MS2MSD1200 | MS2MSD1200 | 12.0mm | 24.0mm | 1piece | JPY: 11,140 | USD: 69.83 |
|
|
 |
61-1256-23 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ16: 32mm) MS2MSD1600 | MS2MSD1600 | 16.0mm | 32.0mm | 1piece | JPY: 30,150 | USD: 188.99 |
|
|
 |
61-1256-24 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ18: 36 mm) MS2MSD1800 | MS2MSD1800 | 18.0mm | 36.0mm | 1piece | JPY: 47,370 | USD: 296.94 |
|
|
 |
61-1256-25 | MSTAR Carbide Enmill (MS2MS, Tujuan Umum, 2 Blades, panjang Blade Sedang, Panjang Hitam Φ20: 40mm) MS2MSD2000 | MS2MSD2000 | 20.0mm | 40.0mm | 1piece | JPY: 51,350 | USD: 321.88 |
|