Spec

• Material/Ingredients: Material/PEX
• Nominal diameter (A): 16
• Length (m): 50
• Maximum allowable pressure (MPa): 1.50 (0°C to 20°C), 1.25 (21°C to 40°C), 0.95 (41°C to 60°C), 0.85 (61°C to 70°C), 0.75 (71°C to 80°C), 0.70 (81°C to 90°C), 0.65 (91°C to 95°C)
• Fluid used: cold/hot water/antifreeze
• Dimension D (Φmm): 21.5
• Notes
• Dimension d (Φmm): 16.2
• Dimension t (mm): 2.65
• Do not use this product in piping where hot water exceeding 70°C is constantly passed or circulated, or in hot water side (return) piping between the Eco Cute heat pump and hot water storage tank.
• Protect the end face of the covering material and the pipe from direct sunlight.
• It is a coating material with improved weather resistance, but due to the characteristics of the resin, it does not have permanent performance against direct sunlight.
• When burying crosslinked polyethylene pipe, please be careful of deformation caused by external pressure and damage caused by buried objects. For water supply and hot water supply, it is recommended to use wire pipe (excluding round wire pipe).
• Avoid contact with materials containing plasticizers such as flexible vinyl chloride on the crosslinked polyethylene pipe. This may cause deterioration of the pipe. Check carefully the piping fixing band and anti-corrosion tape as they may use flexible vinyl chloride.
• Use Onda Coating Cutter "OSC-058" to remove the coating material.Do not use commercially available cutter knives, etc.Scratching cross-linked polyethylene pipe may cause water leakage.
•