Airtight Retainer (Liquid Seal) 0.1 mm Or Less and others

Cold Solvent U-METAL Standard (Iron) 500g and others

RS PRO

Brass Cleaning Glue Brush Wire Brush, 12mm Bristle Width　134-5715

This is a set of 3 brushes. Wooden Angled Brushes. Solid wood handle cleaning brushes with a range of bristle types; horse hair, bristle, brass and stainless steel to accommodate every cleaning need. Standard brushes: bristle length 35mm, bristle width 9mm, bristle trim length 15mm, handle length 185mm Large brushes: bristle length 53mm, bristle width 12mm, bristle trim length 15mm Staple set bristles

RS PRO

Stainless Steel Cleaning Brush Set Cleaning Brush, 12mm Bristle Width　131-4708

This is a set of 3 brushes
Angled wooden brushes

3M Company

3M Silver Conductive Adhesive Transfer Tape, 25mm x 33m Roll　9703 - 33X25

3M™ Z-Axis Electrically Conductive Tape 9703. Introducing the 9703 Electrically conductive tape from 3M™, this pressure sensitive adhesive transfer tape anisotropic electrical conductivity. The adhesive is filled with silver particles enabling interconnections through the adhesive thickness (the Z axis) between substrates. The 3M™ 9703 electrically connects and mechanically bonds medium pitch flexible circuits with other flexible circuits, rigid printed circuit boards (PCB) or LCD screens. Its electrically conductive and offers good adhesion to common PCB substrates such as copper, gold, FR-4 epoxy and polyester films. Low contact resistance and tape construction results in a good EMI performance. Features and Benefits. Low outgassing acrylic adhesive Anisotropic Z-axis electrical conductivity PSA tack properties Thermal curing not required Easy to use in assembly operations. Typical Applications. 3M™ 9703 Electrically Conductive Tape is great for interconnection of flexible circuits to other flexible circuits, rigid printed circuit boards (PCB) or LCD screens. Including EMI shields for displays and gasket attachment to EMI/RFI cabinets and enclosures.

CK

Transparent Glue Stick for Building, Plumbing　T6219 025

CK Glue Sticks. Glue sticks suitable for use in hot melt glue guns Stick diameter is approx. 11 mm

CK

Transparent Glue Stick for Building, Plumbing　T6219 125

CK Glue Sticks. Glue sticks suitable for use in hot melt glue guns Stick diameter is approx. 11 mm

3M Company

3M Scotch-Weld EPX, Applicator Gun Glue Applicator　DS272990500

3M™ Scotch-Weld™ EPX™ Glue Applicator. Introducing the EPX manual applicator from 3M™ Scotch-Weld™ dispenses two-component structural adhesives packaged in Duo-Pak cartridges. It makes dispensing the adhesive clean easily and with minimal wastage. A hand operated trigger drives the two pistons directly into the Dual-Pak cartridge, thus applying equal pressure. It feeds the adhesive into the mixing nozzle, all this without the need for air hoses or electrical cords. Recommended Nozzles. 3M™ Scotch-Weld™ Structural Adhesive Nozzle, 35 ml - ; 349-3146 349-3146 3M™ Scotch-Weld™ Structural Adhesive Nozzle, 45 ml - ; 832-5290 832-5290. Features and Benefits. Dispenses two-component 3M™ Scotch-Weld™ Structural Adhesives Offers take-it-to-the-job convenience without the need for air hoses or electrical cords Ensures correct mix ratio during dispensing; no need to weigh components Minimizes waste and mess associated with hand mixing

NEGUROSU DENKO

Adhesive for terminal Protective Cap　G103

Suitable for bonding various terminal protective caps made of soft vinyl chloride.
The attached wide-mouth spatula and nozzle can be applied efficiently.

NEGUROSU DENKO

Adhesive for Cable Supports　SKMB1

Fast curing and cartridge type for increased work efficiency.

Chemtronics

［Discontinued］Chemtronics Silver Conductive Pen Paint, 8.5 g Pen　CW2200STP

CircuitWorks Conductive Pen - Silver Loaded. The pen contains a silver loaded polymer which can be used to repair faulty tracks, link components, make smooth jumpers and shield delicate electronics. Easy to make instant conductive silver traces Can be used on both rigid and flexible materials, including key pads, circuit film, glass and circuit board laminate Ideal for design, repair and prototype projects Dries in minutes at room temperature (21°C) Can be soldered at low temperature Compatible with the Circuit Works® Overcoat Pen Pen can last for up to 100 feet of trace

3M Company

［Discontinued］Hot-melt adhesive 5/8 inch in diameter x 2 inches long　3748TC

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

3M Company

［Discontinued］Hot-melt adhesive 5/8 in diameter x 8 in length　3748TCQ

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

3M Company

［Discontinued］Hot-melt adhesive 5/8 inch in diameter x 2 inches long　3764TC

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

3M Company

［Discontinued］Hot-melt adhesive 5/8 in diameter x 8 in length　3764TCQ

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

3M Company

［Discontinued］Hot-melt adhesive 5/8 in diameter x 8 in length　3748V0Q

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

3M Company

［Discontinued］Hot-melt adhesive　7375-500TC

V-2:3748 TC, 3748 Q, 3764 TC, 3764 Q V-0:7375-500 TC, 3748 V0Q Jet melt adhesive

Power Adhesives

［Discontinued］1Roll Glue Dot for Various Applications　DOT/H/M/2000/RS

Sticky Dots. Removable, high-tack adhesive dots for temporary bonding of lightweight items such as credit cards, sample inserts, brochures, coupons, ribbons and bows, sample giveaways, gift tags and posters. Medium size, approximately 10mm diameter, 0.3mm depth