Tiger lighter (for welding ignition) 160 x 50 mm　106-0900

This is an igniter that produces sparks by turning the knob.
It comes with a cover to prevent sparks from spreading.

RS PRO

RS PRO Blow Torch MT/770 Mini Gas Torch　467-456

Do not touch the hot flame guard.　Do not use this torch continuously for more than one hour.
The total uptime represents the time used after a replenishment until the next replenishment.　Continuous working time represents the amount of time the tool has been used continuously without a break.

RS PRO

RS PRO Blow Torch Piezo Mini Gas Torch　467-466

Do not touch the hot flame guard.　Do not use this torch continuously for more than one hour.
The total uptime represents the time used after a replenishment until the next replenishment.　Continuous working time represents the amount of time the tool has been used continuously without a break.

RS PRO

RS PRO Steel Wire 0.6mm Diameter　623-142

MIG Welder Accessories
Accessories for use with the MIG welding process

RS PRO

RS PRO Steel Wire 0.8mm Diameter　623-158

MIG Welder Accessories
Accessories for use with the MIG welding process

RS PRO

RS PRO MIG Welder Stainless Steel Wire For MIG Welding　182-8770

MIG Welder Accessories. Accessories for use with the MIG welding process. 0.6 mm tip has an M6 thread 0.8 mm tip has an M8 thread

RS PRO

RS PRO MIG Welder Stainless Steel Wire 0.8mm For MIG Welding　182-8786

MIG Welder Accessories. Accessories for use with the MIG welding process. 0.6 mm tip has an M6 thread 0.8 mm tip has an M8 thread

RS PRO

RS PRO MIG Welder Welding Curtain for Electric Welding　325-0854

Welding Curtain Strip. Supplied in strips 300mm wide, 2 metres long and 2mm thick Each strip comes with a stainless steel clamp on one end for hanging A hanging rail with a length of 984mm is available separately (stock no. ; 325-0911 325-0911 )

SIP

SIP Torch Tips　4040

Mig Welding Torch Tip
A pack of 5 Mig welder torch tips of SIP. Suitable for use with SIP torches and mig welders.

SIP

SIP Torch Tips　4045

Mig Welding Torch Tip
A pack of 5 Mig welder torch tips of SIP. Suitable for use with SIP torches and mig welders.

GCE

Welding Flow Meter for use with Oxygen　9423240RS

GCE Flow Meter. GCE Precision welding flow meter has a brass finish with BSP connections and the flow guage operates at 0 to 30 LPM. FEATURES and BENEFITS: Precision flow meter Brass finish 3/8 inch BSP connections Flow rate 0 to 30 LPM

GCE

Gas Welding Regulator for use with Nitrogen　0762590RS

BS-341. GCE Jet Control 600/S Series High Pressure Cylinder Regulator. Jet Control 600/S series high-pressure cylinder regulators are single stage, two gauge regulators. The cylinder regulators are used in oil refineries, refrigeration laboratories and industrial processes. The regulators are excellent for use where you require a precise and stable delivery of high-pressure industrial gases. 600/S series have been designed and tested to operate on a maximum inlet pressure of up to 300 bar. The regulators also provide a pressure outlet of up to 52 bar. With a robust design, made of top grade materials, plus controlled testing procedures which guarantee high operational safety with small molecular gases. FEATURES and BENEFITS:. Manufactured from high tensile brass Extra safe accurate bulkhead gauges 50 mm Double layer high grade stainless steel diaphragms Efficient metal filters Trouble free operation Prolonged regulator service life Transparent powder painted surface High corrosion resistance Body, bonnet, inlet stem made from high tensile Technical data marked on the rear of the body Outlet connections compatible with Parker fittings Bronze bush reduces friction T-bar for easy pressure setting JIC Fitting outlets Meets the needs of heating, ventilation and air-conditioning (HVAC) trades. TECHNICAL DATA:. Brass body and bonnet chemically stabilised 40 mm diameter diaphragm Encapsulated valves sealed by high grade PA Pressure gauges scale in Bar, accuracy class 2.5% Inlet stem and nut – high tensile brass to BS-341 Safety valve is not present must be an independent part of a downstream gas line Stainless steel T-bar, brass pressure adjusting screw

RS PRO

［Discontinued］RS PRO Gas Torch　467-450

Do not touch the hot flame guard.　Do not use this torch continuously for more than one hour.
The total uptime represents the time used after a replenishment until the next replenishment.　Continuous working time represents the amount of time the tool has been used continuously without a break.

RS PRO

［Discontinued］RS PRO Steel Wire 0.6mm Diameter　623-136

MIG Welder Accessories
Accessories for use with the MIG welding process

RS PRO

［Discontinued］RS PRO Blow Torch Gas Soldering　673-169

Flexible Heat Shield
A pair of RS Pro flexible heat shield is manufactured from of glass fibre with an aluminium face

RS PRO

［Out of stock］RS PRO MIG Welder Accessory Kit for P170P MIG Welder　217-2573

Accessories for the P170P MIG Welder. Mild steel wire in various sizes Torch kits with various tips, shrouds and liners All for the P170P MIG welder 0.6 mm wire on 712-214 0.8 mm wire on 712-208 1 mm wire on 183-0802 Torch kit on 217-2573

GCE

［Discontinued］Gas Welding Regulator for use with Integrated Pressure Relief Valve　50530

GCE Mapp Gas Regulator. Mapp Gas Regulator is part of the GCE Unicontrol range of regulators. The Mapp regulator is for small cylinders and has a bottom entry point. FEATURES and BENEFITS:. Mapp Gas Regulator. Small cylinders. Bottom entry point. Inlet form G1/4 inch LH. Outlet form G1/4 inch LH

GCE

［Discontinued］Gas Welding Regulator for use with Oxygen　0783652RS

ISO2503. BS-341. GCE Unicontrol Single Stage Regulators. UNICONTROL single stage cylinder regulators are pressure regulators that conform to ISO2503. The regulators are designed to give you excellent performance complete with robustness, durability and safety. The well proven regulators use a fully encapsulated which is filter protected. The single stage regulators have a bottom entry plus an integrated pressure relief valve. The valve is at the rear of the body preventing users changing the factory settings. The zinc die-cast bonnet is protected by a double layer powder painting, ensures corrosion resistance in aggressive environments. FEATURES and BENEFITS:. Colour coded control elements Non-detachable ergonomic plastic control knob Maximum outlet pressure locked for operation safety Inlet connections complying with BS-341 standards Corrosion resistant die-cast bonnet Clear and precise 63 mm gauges Technical data marked on rear side of body Safety on the rear of the body – non-adjustable Bonnet powder painted for corrosion resistance Body is forged from high-quality brass. TECHNICAL DATA:. Diaphragm – 55 mm diameter – reinforced EPDM rubber Encapsulated valve – Brass body sealed by PA or high grade chloroprene rubber Pressure gauges – Non-bulkhead 63 mm, class 2.5%, scale calibrated in bar Intel stem and nut – Brass, geometry complying with BS-341 standard Safety valve – Non-adjustable, plastic housing Control elements – Ergonomic PA control know, captive pressure adjusting screw

GCE

［Discontinued］Gas Welding Regulator for use with Propane　0783656RS

ISO2503. BS-341. GCE Unicontrol Single Stage Regulators. UNICONTROL single stage cylinder regulators are pressure regulators that conform to ISO2503. The regulators are designed to give you excellent performance complete with robustness, durability and safety. The well proven regulators use a fully encapsulated which is filter protected. The single stage regulators have a bottom entry plus an integrated pressure relief valve. The valve is at the rear of the body preventing users changing the factory settings. The zinc die-cast bonnet is protected by a double layer powder painting, ensures corrosion resistance in aggressive environments. FEATURES and BENEFITS:. Colour coded control elements Non-detachable ergonomic plastic control knob Maximum outlet pressure locked for operation safety Inlet connections complying with BS-341 standards Corrosion resistant die-cast bonnet Clear and precise 63 mm gauges Technical data marked on rear side of body Safety on the rear of the body – non-adjustable Bonnet powder painted for corrosion resistance Body is forged from high-quality brass. TECHNICAL DATA:. Diaphragm – 55 mm diameter – reinforced EPDM rubber Encapsulated valve – Brass body sealed by PA or high grade chloroprene rubber Pressure gauges – Non-bulkhead 63 mm, class 2.5%, scale calibrated in bar Intel stem and nut – Brass, geometry complying with BS-341 standard Safety valve – Non-adjustable, plastic housing Control elements – Ergonomic PA control know, captive pressure adjusting screw

GCE

［Discontinued］Gas Welding Regulator for use with Argon　0783645RS

ISO2503. BS-341. GCE Unicontrol Single Stage Regulators. UNICONTROL single stage cylinder regulators are pressure regulators that conform to ISO2503. The regulators are designed to give you excellent performance complete with robustness, durability and safety. The well proven regulators use a fully encapsulated which is filter protected. The single stage regulators have a bottom entry plus an integrated pressure relief valve. The valve is at the rear of the body preventing users changing the factory settings. The zinc die-cast bonnet is protected by a double layer powder painting, ensures corrosion resistance in aggressive environments. FEATURES and BENEFITS:. Colour coded control elements Non-detachable ergonomic plastic control knob Maximum outlet pressure locked for operation safety Inlet connections complying with BS-341 standards Corrosion resistant die-cast bonnet Clear and precise 63 mm gauges Technical data marked on rear side of body Safety on the rear of the body – non-adjustable Bonnet powder painted for corrosion resistance Body is forged from high-quality brass. TECHNICAL DATA:. Diaphragm – 55 mm diameter – reinforced EPDM rubber Encapsulated valve – Brass body sealed by PA or high grade chloroprene rubber Pressure gauges – Non-bulkhead 63 mm, class 2.5%, scale calibrated in bar Intel stem and nut – Brass, geometry complying with BS-341 standard Safety valve – Non-adjustable, plastic housing Control elements – Ergonomic PA control know, captive pressure adjusting screw

GCE

［Discontinued］Gas Welding Regulator for use with Argon　0783647RS

ISO2503. BS-341. GCE Unicontrol Single Stage Regulators. UNICONTROL single stage cylinder regulators are pressure regulators that conform to ISO2503. The regulators are designed to give you excellent performance complete with robustness, durability and safety. The well proven regulators use a fully encapsulated which is filter protected. The single stage regulators have a bottom entry plus an integrated pressure relief valve. The valve is at the rear of the body preventing users changing the factory settings. The zinc die-cast bonnet is protected by a double layer powder painting, ensures corrosion resistance in aggressive environments. FEATURES and BENEFITS:. Colour coded control elements Non-detachable ergonomic plastic control knob Maximum outlet pressure locked for operation safety Inlet connections complying with BS-341 standards Corrosion resistant die-cast bonnet Clear and precise 63 mm gauges Technical data marked on rear side of body Safety on the rear of the body – non-adjustable Bonnet powder painted for corrosion resistance Body is forged from high-quality brass. TECHNICAL DATA:. Diaphragm – 55 mm diameter – reinforced EPDM rubber Encapsulated valve – Brass body sealed by PA or high grade chloroprene rubber Pressure gauges – Non-bulkhead 63 mm, class 2.5%, scale calibrated in bar Intel stem and nut – Brass, geometry complying with BS-341 standard Safety valve – Non-adjustable, plastic housing Control elements – Ergonomic PA control know, captive pressure adjusting screw

GCE

［Out of stock］Flash Back Arrestor for use with Oxygen, Regulator Mounting　0764470RS

EN730. GCE Inline Fuel Flashback Arrestor. GCE safe guard 3 flash back arrestor which is regulator mounted, incorporates an improved sintered filter and thermal trip device. The thermal trip device, activated by heat, permanently cuts off the gas supply. The non return valve prevents the reverse flow of gases. The safe guard 3 also includes a flame arresting element giving users extra safety barriers.. FEATURES and BENEFITS:. Sintered filter Sintered flame arresting element Thermal trip device – heat activated Non return valve Impedes flame upstream Avoids build-up of explosive mixtures inside hoses Protects in case of fire Protects stop pressure wave in gas lines Requires no regular maintenance other than checks for external leaks Sealed and tested

GCE

［Discontinued］Cutting Attachment for use with Oxygen　0766230RS

BS EN ISO 5172. GCE Orbit Cutting Attachment. GCE ORBIT cutting attachment is lightweight and uses the nozzle mix principle plus is highly resistant to both backfire and flashback. Engineered from solid brass castings and silver soldered tubes providing a robust construction plus is still lightweight. The orbit cutting attachment has a cutting capacity of over 20 mm using orbit A-FN type nozzles and acetylene fuel gas. GCE BUTBRO torches and nozzles conform to BS EN ISO 5172. FEATURES and BENEFITS:. Lightweight Uses nozzle mix principle Resistant to backfire and flashback Engineered from solid brass and silvered soldered tubes Robust construction Cutting capacity of over 20 mm Precise and comfortable cutting Easy handling

GCE

［Out of stock］Flash Back Arrestor for use with Fuel Gas, Regulator Mounting　0764471RS

EN730. GCE Inline Fuel Flashback Arrestor. GCE safe guard 3 flash back arrestor which is regulator mounted, incorporates an improved sintered filter and thermal trip device. The thermal trip device, activated by heat, permanently cuts off the gas supply. The non return valve prevents the reverse flow of gases. The safe guard 3 also includes a flame arresting element giving users extra safety barriers.. FEATURES and BENEFITS:. Sintered filter Sintered flame arresting element Thermal trip device – heat activated Non return valve Impedes flame upstream Avoids build-up of explosive mixtures inside hoses Protects in case of fire Protects stop pressure wave in gas lines Requires no regular maintenance other than checks for external leaks Sealed and tested

GCE

［Discontinued］Welding Shank for use with Oxygen　0766229RS

GCE Orbit Shank. GCE ORBIT shank is a lightweight that can be used with either lightweight swaged nozzles or D.H. solid copper tips. The shank is common to both welding and cutting heads giving you a quick, positive and leak free attachment used for both. The Orbit shank is manufactured from solid drilled aluminium forging avoiding internal tubes and providing added safety. FEATURES and BENEFITS:. Lightweight Made from solid drilled aluminium Common to welding and cutting heads No internal tubes Added safety Easy handling Quick, positive, leak free attachment Used with swaged nozzles or D.H. solid copper

GCE

［Discontinued］Thread Neck for use with Oxygen　62017RS

GCE Orbit Thread DH Neck. GCE Orbit thread DH neck can be used with the Orbit shank and the D.H solid copper tips which gives you precise flame control plus welding capacity in steel. FEATURES and BENEFITS: Used with the Orbit shank Used with D.H solid copper tips and brass

GCE

［Discontinued］Welding Nozzle for use with Oxygen　81666RS

GCE Orbit Heating Nozzle and Neck. GCE Orbit welding heating nozzle and neck can be used with either lighweight swagged nozzles or D.H. solid sopper tips. FEATURES and BENEFITS: Use with the Orbit shank

GCE

［Discontinued］Welding Mixer for use with Oxygen　0766231RS

GCE Orbit Gas Mixer. GCE ORBIT gas mixer for use with the light duty welding system. The mixer is ideal as part of a system where neat and accurate welding is required. The Orbit gas mixer fits neatly onto the orbit shank and welding tips. FEATURES and BENEFITS: Gas mixer Compatible with Orbit Shank and welding tip

GCE

［Out of stock］Nozzle Nut for use with Oxygen　9438170RS

GCE Orbit Nozzle Nut. GCE Orbit c/a nozzle nut can bes used along with the Orbit shank and the Orbit cutting attachments. Using the Orbit type nozzles and acetylene fuel gas gives you a cutting capacity of over 20 mm. FEATURES and BENEFITS: Can be used with other Orbit welding and cutting accessories

GCE

［Discontinued］Welding Torch for use with Acetylene Fuel Gas　0766277RS

GCE Jetsoud Welding Torch. GCE Jetsoud welding torch works on the injector principle and was designed for welding with Oxygen and acetylene. S-4 tips are the ideal for welding with oxygen and acetylene, welding tips are different depending upon the thickness of material being welded. The welding torch is easy to handle and excellent for reaching narrow hard to get at points. Excellent flame regulation with low flow rates the torch also allows reduction in the movement of the users wrist. FEATURES and BENEFITS:. Uses oxygen and acetylene Works on injector principle S-4 tips ideal for use with the welding torch Perfect flame regulation Low flow rates Microregulation Reaches narrow hard to get at points Easy to use. SAFETY:. Clean torch at regular intervals Check all hoses are in good condition Remove and replace any damaged parts Check connections are secure Avoid excessive pressure which damages hoses Check for leaks with a detecting fluid Use recommended pressures Never use oil or grease. APPLICATIONS:. Refrigerator technicians Air-conditioning equipment

GCE

［Out of stock］Welding Hose for use with Allied Processes, Oxygen Cutting, Oxygen Welding　841109RS

Hose - ISO 3821, Hose Assembly EN 1256. GCE Welding Hose Oxygen. GCE welding rubber hose is for use with oxygen in the cutting and welding process. A hard wearing rubber hose that is resistant to welding gases but is not suitable for LPG, MPS and CNG. FEATURES and BENEFITS: Oxygen hose Resistant to welding gases Reinforced high tensile synthetic textile Inner tube – synthetic rubber Colour – Blue External cover is synthetic rubber Abrasion and weather resistant Non return valve in the outlet Working pressure 20 bar Bursting pressure 60 bar Temperature range -20°C to +60°C Safety factor 3:1 Hose – ISO 3821 Hose assembly – EN 1256 RS Stock No. ; 918-6774 918-6774 is 20m long, RS Stock No. ; 918-6771 918-6771 is 10m long

GCE

［Out of stock］Welding Hose for use with Propane　849120RS

Hose – ISO 3821 Hose assembly – EN 1256. GCE Welding Hose Propane / Butane. GCE welding rubber hose is for use with propane / butane in the cutting and welding process. A hard wearing rubber hose that is resistant to welding gases. The rubber hose is also suitable for use with LPG, MPS and CNG gas.. FEATURES and BENEFITS: Propane /Butane hose Resistant to LPG Liquid Petroleum Gas, MPS Methylacetylene propadiene Gas, CNG Compressed Natural Gas Reinforced high tensile synthetic textile Inner tube – synthetic rubber Colour – Orange External cover is synthetic rubber Abrasion and weather resistant Non return valve in the outlet Working pressure 20 bar Bursting pressure 60 bar Temperature range -20°C to +60°c Safety factor 3:1 Hose – ISO 3821 Hose assembly – EN 1256

GCE

［Out of stock］Welding Hose for use with Acetylene　849109RS

GCE Welding Hose Acetylene. GCE welding rubber hose is for use with Oxygen / Acetylene in the cutting and welding process. A hard wearing rubber hose that is resistant to welding gases. The rubber hose is not suitable for use with LPG, MPS and CNG gas.. FEATURES and BENEFITS: Acetylene hose Not suitable for - LPG Liquid Petroleum Gas, MPS Methylacetylene propadiene Gas, CNG Compressed Natural Gas Reinforced high tensile synthetic textile Inner tube – synthetic rubber Colour – Red External cover is synthetic rubber Abrasion and weather resistant Non return valve in the outlet Working pressure 20 bar Bursting pressure 60 bar Temperature range -20°C to +60°c Safety factor 3:1 Hose – ISO 3821 Hose assembly – EN 1256

GCE

［Discontinued］Welding Hose for use with Propane　849121RS

Hose – ISO 3821 Hose assembly – EN 1256. GCE Welding Hose Propane / Butane. GCE welding rubber hose is for use with propane / butane in the cutting and welding process. A hard wearing rubber hose that is resistant to welding gases. The rubber hose is also suitable for use with LPG, MPS and CNG gas.. FEATURES and BENEFITS: Propane /Butane hose Resistant to LPG Liquid Petroleum Gas, MPS Methylacetylene propadiene Gas, CNG Compressed Natural Gas Reinforced high tensile synthetic textile Inner tube – synthetic rubber Colour – Orange External cover is synthetic rubber Abrasion and weather resistant Non return valve in the outlet Working pressure 20 bar Bursting pressure 60 bar Temperature range -20°C to +60°c Safety factor 3:1 Hose – ISO 3821 Hose assembly – EN 1256

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768555RS

GCE ANM Series Cutting Nozzles. GCE Hand cutting nozzles style ANM. This range of short pattern cutting nozzles have 6 heating holes are 76 mm long and use acetylene fuel gas. FEATURES and BENEFITS: ANM style Short pattern 6 heating holes 76 mm long Use Acetylene fuel gas Various sizes available Various cutting ranges available. Various sizes:1/16 (1.6 mm) Stock Number ; 918-6793 918-6793 , 1/32 (0.8 mm) Stock Number ; 918-6796 918-6796 , 3/64 (1.2 mm) Stock Number ; 918-6790 918-6790

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768556RS

GCE ANM Series Cutting Nozzles. GCE Hand cutting nozzles style ANM. This range of short pattern cutting nozzles have 6 heating holes are 76 mm long and use acetylene fuel gas. FEATURES and BENEFITS: ANM style Short pattern 6 heating holes 76 mm long Use Acetylene fuel gas Various sizes available Various cutting ranges available. Various sizes:1/16 (1.6 mm) Stock Number ; 918-6793 918-6793 , 1/32 (0.8 mm) Stock Number ; 918-6796 918-6796 , 3/64 (1.2 mm) Stock Number ; 918-6790 918-6790

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768554RS

GCE ANM Series Cutting Nozzles. GCE Hand cutting nozzles style ANM. This range of short pattern cutting nozzles have 6 heating holes are 76 mm long and use acetylene fuel gas. FEATURES and BENEFITS: ANM style Short pattern 6 heating holes 76 mm long Use Acetylene fuel gas Various sizes available Various cutting ranges available. Various sizes:1/16 (1.6 mm) Stock Number ; 918-6793 918-6793 , 1/32 (0.8 mm) Stock Number ; 918-6796 918-6796 , 3/64 (1.2 mm) Stock Number ; 918-6790 918-6790

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768879RS

GCE PNM Series Cutting Nozzles. GCE Hand cutting nozzles style PNM. This range of short pattern cutting nozzles have a 9 spline inner are 76 mm long and use Propane fuel gas. FEATURES and BENEFITS: Style PNM Short pattern 9 Spline inner 76 mm long Use Propane fuel gas Various sizes available Various cutting ranges available

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768880RS

GCE PNM Series Cutting Nozzles. GCE Hand cutting nozzles style PNM. This range of short pattern cutting nozzles have a 9 spline inner are 76 mm long and use Propane fuel gas. FEATURES and BENEFITS: Style PNM Short pattern 9 Spline inner 76 mm long Use Propane fuel gas Various sizes available Various cutting ranges available

GCE

［Out of stock］Cutting Nozzle for use with Nozzle　0768865RS

GCE PNM Series Cutting Nozzles. GCE Hand cutting nozzles style PNM. This range of short pattern cutting nozzles have a 9 spline inner are 76 mm long and use Propane fuel gas. FEATURES and BENEFITS: Style PNM Short pattern 9 Spline inner 76 mm long Use Propane fuel gas Various sizes available Various cutting ranges available