Molex Electronics

SL 300mm 22 AWG Pre-Crimped Lead　79758-0011

Molex Pre-Crimped Leads. A range of pre-crimped leads for use with various connector systems and ideal for use in prototype and pre-production requirements. These leads are crimped on both ends making them suitable for wire to wire applications. The leads can also be in half for use in wire to board applications. The cables are UL listed and made from high quality approved materials, they are also fully tested to decrease the time to market. These pre-crimped leads are available with female to female or male to male configurations with cable lengths of 150 mm and 300 mm

Molex Electronics

KK 300mm 22 AWG Pre-Crimped Lead　79758-0015

Molex Pre-Crimped Leads. A range of pre-crimped leads for use with various connector systems and ideal for use in prototype and pre-production requirements. These leads are crimped on both ends making them suitable for wire to wire applications. The leads can also be in half for use in wire to board applications. The cables are UL listed and made from high quality approved materials, they are also fully tested to decrease the time to market. These pre-crimped leads are available with female to female or male to male configurations with cable lengths of 150 mm and 300 mm

JST

150 mm crimp-free end lead PA 2.0　SPHD1-SS5-24150

Pre-terminated crimp leads. AWG 24 Rectangular crimp for greater contact area Contact on crimped lead offers positive latching with housing, typical stock number < 476-6760') 476-6760/

JST

300 mm crimp-free end lead PA 2.0　SPHD1-SS5-24300

Pre-terminated crimp leads. AWG 24 Rectangular crimp for greater contact area Contact on crimped lead offers positive latching with housing, typical stock number < 476-6760') 476-6760/

JST

ZH Double ended Wire + Contacts-150mm　01SZHSZH-30L-150

JST ZH Series Crimping Contact and Cable Assembly
This crimping contact and cable assembly is used for ZH series wire-to-substrate crimping connector housing. These crimped receptacle contacts are made of tin plated phosphor bronze and support the 28~26 AWG (xZH-002T-P0.5) and 32~28 AWG (xZH-003T-P0.5) wire size ranges.

Samtec

Wire-to-Substrate Cable assembly　FFSD-20-D-08.00-01-N

Samtec FFSD Series 1.27 mm Tiger Eye IDC Socket Ribbon Cable Assembly
The FFSD Series Tiger Eye IDC socket ribbon cable assembly consists of a 30 AWG 0.635 mm pitch gray ribbon cable and a 1.27 mm pitch 2 row female socket with reliable gold-plated Tiger Eye contacts and a polarization notch at one end for precise engagement.　These FFSD Series IDC flat ribbon cable socket assemblies consist of up to 50 contacts in assembly lengths of 2 to 10 inches.

Molex Electronics

Micro-Clasp 150mm 24AWG Pre-Crimped Lead　79758-1001

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Pico-Lock 150mm 24AWG Pre-Crimped Lead　79758-1003

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Pico-Lock 300mm 24AWG Pre-Crimped Lead　79758-1004

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Dura-Click 150mm 26AWG Pre-Crimped Lead　79758-1008

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Dura-Click 300mm 26AWG Pre-Crimped Lead　79758-1009

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Click-Mate 300mm 24AWG Pre-Crimped Lead　79758-1011

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Click-Mate 150mm 28AWG Pre-Crimped Lead　79758-1012

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Click-Mate 300mm 28AWG Pre-Crimped Lead　79758-1013

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Click-Mate 150mm 24AWG Pre-Crimped Lead　79758-1014

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Pico-Clasp 150mm 28AWG Pre-Crimped Lead　79758-1018

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Pico-Clasp 300mm 28AWG Pre-Crimped Lead　79758-1019

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

Sherlock 150mm 26AWG Pre-Crimped Lead　79758-1020

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

C-Grid 300mm 22AWG Pre-Crimped Lead　79758-2023

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

062' 300mm 22AWG Pre-Crimped Lead　79758-2026

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

062' 300mm 22AWG Pre-Crimped Lead　79758-2028

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

KK 150mm 22 AWG Pre-Crimped Lead　79758-0007

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

Molex Electronics

PICO-SPOX 300mm 24 AWG Pre-Crimped Lead　79758-0016

Molex Crimped Lead
Crimped lead products for various connector systems. It meets the requirements of prototypes and prototypes. These leads are crimped at both ends, making them ideal for wire-to-wire applications. It can also be halved for wire-to-board applications. Cables are made from UL-certified high-quality materials. It has been fully tested and can reduce time to market. There are female-female and male-male configurations and cable lengths of 150 mm and 300 mm.

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483354-1

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483358-3

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483354-1

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483358-3

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

JST

150 mm crimp-free end lead PA 2.0　SPHD1-SS5-24150

Pre-terminated crimp leads. AWG 24 Rectangular crimp for greater contact area Contact on crimped lead offers positive latching with housing, typical stock number < 476-6760') 476-6760/

JST

300 mm crimp-free end lead PA 2.0　SPHD1-SS5-24300

Pre-terminated crimp leads. AWG 24 Rectangular crimp for greater contact area Contact on crimped lead offers positive latching with housing, typical stock number < 476-6760') 476-6760/

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483356-3

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

TE Connectivity

TE Connectivity Micro-Match Wire to Board Cable Assembly　1483356-3

Jumper Cable Assemblies. Miniature connector system 1.27mm pitch Patented contact design eliminates fretting corrosion Jumper cables available in various positions and 3 lengths Uses 0.050 pitch ribbon cable Temperature rating -40°C → +105°C UL recognised

JST

ZH Double ended Wire + Contacts-150mm　01SZHSZH-30L-150

JST ZH Series Crimping Contact and Cable Assembly
This crimping contact and cable assembly is used for ZH series wire-to-substrate crimping connector housing.

JST

JST SUR Wire to Board Cable Assembly 1 Row, 2 Way 1 Row 2 Way, 150mm　02SUR-02SUR-32W150

JST

JST SUR Wire to Board Cable Assembly 1 Row, 4 Way 1 Row 4 Way, 150mm　04SUR-04SUR-32W150

JST

JST SUR Wire to Board Cable Assembly 1 Row, 8 Way 1 Row 8 Way, 150mm　08SUR-08SUR-32W150

JST

SUR 2 way harness 1-1　02SUR-02SUR-32W150

Wire to board Cable assembly

JST

SUR 4 way harness 1-1　04SUR-04SUR-32W150

Wire to board Cable assembly

JST

SUR 8 way harness 1-1　08SUR-08SUR-32W150

Wire to board Cable assembly

RS PRO

DF13 Harness Socket Contact 300mm BLK　180-6026

crimped lead

RS PRO

DF13 Harness Socket Contact 300mm WHT　180-6027

crimped lead