PCB Cutting, Punching, Forming & Drilling
Filters
-
Steel PCB Drill Bit 0.6mm 457-588
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 3,870
USD: 24.26
-
Steel PCB Drill Bit 1.3mm 457-601
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 2,500
USD: 15.67
-
Steel PCB Drill Bit 1.5mm 457-605
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 4,800
USD: 30.09
-
Steel PCB Drill Bit 1.2mm 457-611
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 4,800
USD: 30.09
-
Carbide PCB Drill Bit 0.8mm 457-633
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,180
USD: 26.20
-
Carbide PCB Drill Bit 0.9mm 457-639
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,160
USD: 26.08
-
Carbide PCB Drill Bit 0.6mm 457-645
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 8,210
USD: 51.46
-
Carbide PCB Drill Bit 0.7mm 457-649
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,160
USD: 26.08
-
Carbide PCB Drill Bit 1.2mm 457-673
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,170
USD: 26.14
-
Carbide PCB Drill Bit 1.3mm 457-677
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,150
USD: 26.01
-
34, Wide Roll Eyelet PCB Rivet for 2.36mm Diameter, 3.18mm Length 34
Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.
1 products found
JPY: 1,670
USD: 10.47
-
45, Wide Roll Eyelet PCB Rivet for 3.18mm Diameter, 3.96mm Length 45
Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.
1 products found
JPY: 2,300
USD: 14.42
-
46, Wide Roll Eyelet PCB Rivet for 3.18mm Diameter, 4.75mm Length 46
Wide roll eyelets. Standard eyelets, precision-made to ensure standard dimensions in a single series. Preserve good solderability, even after extended storage.
1 products found
JPY: 2,310
USD: 14.48
-
A720 0.20MM, Cobalt PCB Drill Bit 0.2mm A720 0.20MM
HSCo Micro Drill (A720). HSCo drill for small diameter drilling in most materials up to x2.5 diameter All drills supplied on 1mm shank Manufactured to DIN1899 Standards
1 products found
JPY: 5,760
USD: 36.11
-
A720 0.30MM, Cobalt PCB Drill Bit 0.3mm A720 0.30MM
HSCo Micro Drill (A720). HSCo drill for small diameter drilling in most materials up to x2.5 diameter All drills supplied on 1mm shank Manufactured to DIN1899 Standards
1 products found
JPY: 4,770
USD: 29.90
-
DW10.5, Carbide PCB Drill Bit 0.1mm DW10.5
CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage
1 products found
JPY: 45,000
USD: 282.08
-
DU68, Carbide PCB Drill Bit 0.8mm DU68
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,600
USD: 10.03
-
DU68.10, Carbide PCB Drill Bit 0.8mm DU68.10
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 12,100
USD: 75.85
-
DU70.10, Carbide PCB Drill Bit 1mm DU70.10
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 12,100
USD: 75.85
-
DU85.10, Carbide PCB Drill Bit 2.5mm DU85.10
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 12,800
USD: 80.24
-
13-111011-1, Carbide PCB Drill Bit 0.9mm 13-111011-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,140
USD: 7.15
-
13-111019-1, Carbide PCB Drill Bit 1.3mm 13-111019-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,150
USD: 7.21
-
13-111015-1, Carbide PCB Drill Bit 1.1mm 13-111015-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,150
USD: 7.21
-
13-111017-1, Carbide PCB Drill Bit 1.2mm 13-111017-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,150
USD: 7.21
-
13-111021-1, Carbide PCB Drill Bit 1.4mm 13-111021-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,190
USD: 7.46
-
13-111023-1, Carbide PCB Drill Bit 1.5mm 13-111023-1
1/8 in. Shank Tungsten Carbide Drills. High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted with drill collars for ease of use and identification.
1 products found
JPY: 1,150
USD: 7.21
-
EP116, Drilling Plywood Board EP116
Compatible with CAD and CAM software packages, also accepts HPGL, ISO, EXCELLON, GERBER, GCODE, DXF files. Technodrill drilling / milling machine. The Technodrill machine etches, drills and mills plastic, metal and aluminium parts, and printed circuit boards. Like a CNC machine, it can shape parts regardless of the source of the drawing. Two versions available: an industrial version and a teaching version allowing configuration of multiple installations which can be used on a network. Immediate familiarisation. Multi-purpose: drilling, milling, trimming. Compatible with all file types. Extremely accurate axis guidance. True 3-axis system. Micro-step control, avoids mechanical resonance. GALAAD 3 control software (with free updates). Integrated electronics, 32-bit microprocessor. Tool sensor (removable for XL version) Safety: mechanical and software limiting
1 products found
JPY: 12,800
USD: 80.24
-
BG9.S, Rivet PCB Rivet for 1.3mm Diameter, 3mm Length BG9.S
Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets
1 products found
JPY: 5,430
USD: 34.04
-
BG10.S, Rivet PCB Rivet for 1.8mm Diameter, 3mm Length BG10.S
Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets
1 products found
JPY: 4,060
USD: 25.45
-
Carbide PCB Drill Bit 3.17mm DU201
CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage
1 products found
JPY: 9,150
USD: 57.36
-
DU66, Carbide PCB Drill Bit 0.6mm DU66
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,570
USD: 9.84
-
DU69, Carbide PCB Drill Bit 0.9mm DU69
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,380
USD: 8.65
-
DU67, Carbide PCB Drill Bit 0.7mm DU67
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,430
USD: 8.96
-
DU71, Carbide PCB Drill Bit 1.1mm DU71
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,370
USD: 8.59
-
DU72, Carbide PCB Drill Bit 1.2mm DU72
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,420
USD: 8.90
-
DU75, Carbide PCB Drill Bit 1.5mm DU75
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,600
USD: 10.03
-
DU74, Carbide PCB Drill Bit 1.4mm DU74
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,360
USD: 8.53
-
DU80, Carbide PCB Drill Bit 2mm DU80
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,400
USD: 8.78
-
DU85, Carbide PCB Drill Bit 2.5mm DU85
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 1,450
USD: 9.09
-
DU71.10, Carbide PCB Drill Bit 1.1mm DU71.10
CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.
1 products found
JPY: 12,900
USD: 80.86
