Linkman

LV 1.0 Assembled Internal Wiring Set　LV1-HARNESS-SET

【 Special Features 】
Set of dedicated wires for connecting each board in the dedicated case.

Linkman

LV1-CASE dedicated parts set　LV1-CASE-OP

Linkman

Class-D amplifier base for LVX-IR 4301 M　LVX-PWAM-BASE

This is a power amplifier board which is taken over by the LV concept of 72x47mm size. It can be replaced with 2 power amplifier boards in the LV-1.0 already sold.
Artistic board layout ・72x47mm size with balanced signal input stage circuit, output stage filter circuit, and anomaly detection interface circuit.

Linkman

AC/DC Power Substrate　LV1-ACDCM

Size
72x47mm

Linkman

DC/DC Power Substrate　LV1-DCDCM

Size
72x47mm

STMicroelectronics

TDA7294V STMicroelectronics, Audio Amplifier, 15-Pin MULTIWATT V　TDA7294V

Audio Class-AB Power Amplifiers, STMicroelectronics. Mono, stereo and multi-channel solutions Wide range of output power options

STMicroelectronics

MC33172D STMicroelectronics, Op Amp, 2.1MHz, 5 → 28 V, 8-Pin SOIC　MC33172D

MC3317x, Low Consumption Versus Speed Operational Amplifiers. The MC3x172 (dual) and MC3x174 (quad) are bipolar operational amplifiers. Good consumption/speed ratio: 200 μA/Amp (2.1 MHz, 2 V/μs) Wide input common mode voltage range Single power supply operation from +4 V to +44 V Pin-to-pin compatible with standard dual operational amplifiers

Microchip

Microchip, Op Amp, RRO, 2.8MHz, 3 V, 5 V, 14-Pin PDIP　MCP604-I/P

MCP601/602/603/604 Operational Amplifiers

Analog Devices

AD8137YRZ Analog Devices, Differential Amplifier Rail to Rail Output 8-Pin SOIC　AD8137YRZ

Differential Amplifiers, Analog Devices. Differential Amplifiers by Analog Devices are integrated and optimised for differential signalling applications. These speciality amplifiers have inherent common mode rejection properties that provide a low harmonic distortion with an output gain and phase matching. Applications include driving or receiving signals over long cable lengths, driving a balanced ADC input and looking for complementary outputs.

Analog Devices

OP491GSZ Analog Devices, Op Amp, RRIO, 3MHz, 3 → 9 V, 14-Pin SOIC　OP491GSZ

Rail-to-rail Input and Output Op Amps, Analog Devices. A range of RRIO operational amplifiers from Analog Devices featuring rail-to-rail input and output voltage capability. The range includes devices using both bipolar and CMOS technology, and single, dual and quad package formats.

Analog Devices

AD8561ARZ Analog Devices, Comparator, Complementary O/P, 5 V, 9 V 8-Pin SOIC　AD8561ARZ

Comparators, Analog Devices

Renesas Electronics

UPC4064G2-A Renesas Electronics, Op Amp, 1MHz, 14-Pin SOP　UPC4064G2-A

Operational Amplifiers, Renesas Electronics

STMicroelectronics

TSV321RILT STMicroelectronics, Op Amp, RRIO, 1.4MHz, 3 V, 5 V, 5-Pin SOT-23　TSV321RILT

TSV321, TSV324, TSV358, Low Voltage Rail-to-Rail I/O General Purpose Operational Amplifiers. Low voltage versions of the LM358 and LM324 Power supply operation from 2.5 V to 6 V Rail-to-Rail input and output Capable of driving a 32 Ω load resistor Typical Output current of 80 mA

STMicroelectronics

TSV358IDT STMicroelectronics, Op Amp, RRIO, 1.4MHz, 3 V, 5 V, 8-Pin SOIC　TSV358IDT

TSV321, TSV324, TSV358, Low Voltage Rail-to-Rail I/O General Purpose Operational Amplifiers. Low voltage versions of the LM358 and LM324 Power supply operation from 2.5 V to 6 V Rail-to-Rail input and output Capable of driving a 32 Ω load resistor Typical Output current of 80 mA

Microchip

MCP6002-I/SN Microchip, Op Amp, RRIO, 1MHz, 3 V, 5 V, 8-Pin SOIC　MCP6002-I/SN

MCP6001/6002/6004 Operational Amplifiers

Microchip

MCP6002-I/MS Microchip, Op Amp, RRIO, 1MHz, 3 V, 5 V, 8-Pin MSOP　MCP6002-I/MS

MCP6001/6002/6004 Operational Amplifiers

Microchip

MCP6004-I/ST Microchip, Op Amp, RRIO, 1MHz, 3 V, 5 V, 14-Pin TSSOP　MCP6004-I/ST

MCP6001/6002/6004 Operational Amplifiers

Microchip

MCP6024-I/ST Microchip, Precision, Op Amp, RRIO, 10MHz, 3 V, 5 V, 14-Pin TSSOP　MCP6024-I/ST

MCP6021/6022/6023/6024 Operational Amplifiers

Microchip

MCP6V01-E/SN Microchip, Op Amp, RRIO, 1.3MHz, 3 V, 5 V, 8-Pin SOIC　MCP6V01-E/SN

MCP6V01/02/03 Operational Amplifiers

Microchip

MCP6V02-E/SN Microchip, Op Amp, RRIO, 1.3MHz, 3 V, 5 V, 8-Pin SOIC　MCP6V02-E/SN

MCP6V01/02/03 Operational Amplifiers

STMicroelectronics

TDA7266 STMicroelectronics, Audio Amplifier, 15-Pin MULTIWATT V　TDA7266

Audio Class-AB Power Amplifiers, STMicroelectronics. Mono, stereo and multi-channel solutions Wide range of output power options

ON Semiconductor

LM324DR2G ON Semiconductor, Op Amp, 5 → 28 V, 14-Pin SOIC　LM324DR2G

LM324, LM224, LM2902, NCV2902, Single Supply, Quad Operational Amplifiers, ON Semiconductor. The ON Semiconductor LM324/LM224/LM2902/NCV2902 quad operational amplifiers with true differential inputs can operate at supply voltages between 3 V and 32 V. The common mode input range includes the negative supply eliminating the need for external biasing components in many applications. The output voltage range also includes the negative power supply voltage. Four Amplifiers Per Package Short Circuited Protected Outputs True Differential Input Stage Single Supply Operation: 3 V to 32 V Low Input Bias Currents: 100 nA Maximum (LM324A) Internally Compensated ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Operation

ON Semiconductor

LM2901DR2G ON Semiconductor, Quad Comparator, Open Collector O/P, 1.3μs 5 → 28 V 14-Pin SOIC　LM2901DR2G

Comparators, ON Semiconductor

ON Semiconductor

LM2903DR2G ON Semiconductor, Dual Comparator, Open Collector O/P, 1.5μs 3 → 28 V 8-Pin SOIC　LM2903DR2G

Comparators, ON Semiconductor

ON Semiconductor

LM339DR2G ON Semiconductor, Quad Comparator, Open Collector O/P, 1.3μs 5 → 28 V 14-Pin SOIC　LM339DR2G

Comparators, ON Semiconductor

ON Semiconductor

LM393DR2G ON Semiconductor, Dual Comparator, Open Collector O/P, 1.3μs 3 → 28 V 8-Pin SOIC　LM393DR2G

Comparators, ON Semiconductor

Broadcom

ACPL-C784-000E Broadcom, Isolation Amplifier, 5 V, 8-Pin SSOP　ACPL-C784-000E

Isolating Amplifiers, Avago Technologies. The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters. Various types available including: precision isolation amplifiers miniature isolation amplifiers precision optically isolated voltage sensors isolated linear sensing ICs isolation amplifiers with short circuit and overload detection automotive isolation amplifiers

Broadcom

ACPL-C78A-000E Broadcom, Isolation Amplifier, 5 V, 8-Pin SOIC　ACPL-C78A-000E

Isolating Amplifiers, Avago Technologies. The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters. Various types available including: precision isolation amplifiers miniature isolation amplifiers precision optically isolated voltage sensors isolated linear sensing ICs isolation amplifiers with short circuit and overload detection automotive isolation amplifiers

Microchip

MCP6001T-I/OT Microchip, Op Amp, RRIO, 1MHz, 3 V, 5 V, 5-Pin SOT-23　MCP6001T-I/OT

MCP6001/6002/6004 Operational Amplifiers

Renesas Electronics

CA3240AEZ Renesas Electronics, Op Amp, 4.5MHz, 5 → 28 V, 8-Pin PDIP　CA3240AEZ

CA3240, CA3240A, Dual, 4.5MHz, BiMOS Operational Amplifier with MOSFET Input / Bipolar Output, Intersil. Dual Version of CA3140 Internally Compensated MOSFET input stage provides High Input Impedance with Low-Input Current Wide Common Mode Input Voltage range

Analog Devices

OP497FPZ Analog Devices, Op Amp, 500kHz, 14-Pin PDIP　OP497FPZ

Precision Op Amps, Analog Devices

DiodesZetex

APX358SG-13 DiodesZetex, Low Voltage, Op Amp, RRIO, 1MHz, 2.5 → 5.5 V, 8-Pin SOP　APX358SG-13

Operational Amplifiers at 5 V max. Supply Voltage, Diodes Inc. Diodes operational amplifier range provides Industry standard parts for general purpose applications.

Broadcom

ACPL-C78A-060E Broadcom, 2-Channel Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP　ACPL-C78A-060E

Isolating Amplifiers, Avago Technologies. The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters. Various types available including: precision isolation amplifiers miniature isolation amplifiers precision optically isolated voltage sensors isolated linear sensing ICs isolation amplifiers with short circuit and overload detection automotive isolation amplifiers

Broadcom

ACPL-C79B-000E Broadcom, 2-Channel Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP　ACPL-C79B-000E

Isolating Amplifiers, Avago Technologies. The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters. Various types available including: precision isolation amplifiers miniature isolation amplifiers precision optically isolated voltage sensors isolated linear sensing ICs isolation amplifiers with short circuit and overload detection automotive isolation amplifiers

Broadcom

ACPL-C79A-000E Broadcom, 2-Channel Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP　ACPL-C79A-000E

Isolating Amplifiers, Avago Technologies. The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters. Various types available including: precision isolation amplifiers miniature isolation amplifiers precision optically isolated voltage sensors isolated linear sensing ICs isolation amplifiers with short circuit and overload detection automotive isolation amplifiers

STMicroelectronics

LM2904DT STMicroelectronics, Low Power, Op Amp, 1.1MHz, 5 → 28 V, 8-Pin SOIC　LM2904DT

Parts containing 'Y' suffix are automotive qualified to AEC-Q100. LM2904, LM2904W, Low Power, Dual Operational Amplifiers. The LM2904x device contains two independent operational amplifiers with internal frequency compensation. Gain Bandwidth Product: 1.1MHz Slew Rate: 0.6V/μs Max input offset voltage: 9mV (LM2904), 4mV (LM2904A) LM2904xW parts feature internal ESD protection, 2kV HBM Power supply: +3V to +30Vdc RS Product Codes < 714-0758') 714-0758/ LM2904D SOIC8 < 714-0767') 714-0767/ LM2904DT SOIC8 < 686-7584') 686-7584/ LM2904PT TSSOP8 < 795-9158') 795-9158/ LM2904ST MiniSO8 < 791-9210') 791-9210/ LM2904AYDT Automotive SOIC8 < 829-4402') 829-4402/ LM2904AYPT Automotive TSSOP8 < 791-9201') 791-9201/ LM2904AWYPT Automotive ESD TSSOP8 < 791-9217') 791-9217/ LM2904WHYDT Automotive ESD SOIC8 < 791-9226') 791-9226/ LM2904WYDT Automotive ESD SOIC8 < 829-4405') 829-4405/ LM2904WYPT Automotive ESD TSSOP8

STMicroelectronics

LM293DT STMicroelectronics, Dual Comparator, Open Collector O/P, 1.3μs 3 → 28 V 8-Pin SOIC　LM293DT

Comparators, STMicroelectronics. High-Speed Comparators, with fast response times Low-Power Comparators with operating currents as low as 210nA High-Temperature qualified devices Automotive-grade Comparators are AEC-Q100 and AEC-Q101 qualified

STMicroelectronics

LM358DT STMicroelectronics, Low Power, Op Amp, 1.1MHz, 5 → 28 V, 8-Pin SOIC　LM358DT

LM158, LM258, LM358, Low Power Dual Operational Amplifiers with Low Input Bias Current. The LM158, LM258, LM358 operational amplifiers consist of two independent, high-gain, internally frequency-compensated circuits. In linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground. Designed to operate from a single power supply Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz

STMicroelectronics

LM393DT STMicroelectronics, Dual Comparator, Open Collector O/P, 1.3μs 3 V, 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, 28 V　LM393DT

Comparators, STMicroelectronics. High-Speed Comparators, with fast response times Low-Power Comparators with operating currents as low as 210nA High-Temperature qualified devices Automotive-grade Comparators are AEC-Q100 and AEC-Q101 qualified

STMicroelectronics

TL064CD STMicroelectronics, Op Amp, 1MHz, 14-Pin SOIC　TL064CD

TL06x, TL07x, TL08x, JFET Inputs, Low Input Bias Current Operational Amplifiers. The TL06x, TL07x, and TL08x are operational amplifiers with high input impedance JFET input stage. They feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient. Low-Power consumption: 200 μA (TL06x, per amplifier) Wide common-mode and differential voltage ranges Low Noise, typical 15 nV/√Hz (TL07x) Low harmonic distortion: 0.01% (TL07x) Output short circuit protection Internal frequency compensation Latch up free operation High Slew rate: 16 V/μs (TL07x, TL08x), 3.5 V/μs (TL06x)