ABC Trading Co., Ltd.

1 Liquid Type simple Urethane Foam (injection gun dedicated type) GSMPJ Pink and others

Henkel Japan Ltd.

Sista Urethane Foam Gray Form 750ml　SGY-750

Since the color of the foam is the same as that of mortar and concrete, the adhesive filling can be done neatly and the work efficiency is very good.
For use with special guns SGW-927 and SGW-927 L (sold separately).

Henkel Japan Ltd.

Urethane Foam (1 liquid Type) M5270 750ml and others

fischer japan

Urethane Hyper Form PU1/500 B2 Light Green　33394

It is not a used up type and can be stored in the middle.
Non-CFC type.

Henkel Japan Ltd.

Loctite Green Form Big　DGB-570

Excellent thermal insulation and energy-saving effect.
Environmentally friendly non-CFC type.

ABC Trading Co., Ltd.

1 Liquid Type simple Urethane Foam (injection gun dedicated type) GSB1 Pink　GSB1-P

It is a 1 liquid type foamed urethane that has passed the Class 3 test of JISA 1321.
Cartridge type for guns that can be used repeatedly.

Henkel Japan Ltd.

Urethane Foam Green Form 340g　DGF-300

Excellent thermal insulation and energy-saving effect.
Environmentally friendly non-CFC type.

Henkel Japan Ltd.

Urethane Foam (1 liquid Type) M5250 500g　SUM-525

Filling only type.
Excellent thermal insulation and energy-saving effect.

Henkel Japan Ltd.

Urethane Foam (1 liquid Type) M5230 450g　SUM-523

Fill and spray changeover type.
It is a one-liquid type foamed urethane that can be sprayed with a dedicated nozzle.

ICHINEN TASCO CO., LTD.

Urethane Foam Gun　TA907BR-12

ICHINEN TASCO CO., LTD.

Urethane Foam Gun　TA907BR-4

Can be filled to a narrow gap of 3.5 mm in width, which is impossible with conventional guns.

GREEN CROSS Co., Ltd.

Urethane Foam Spray 340 ML　6300003707

Urethane foam filler for use in reverse direction.
When using connection paints (water-based oil-based [excluding lacquer-based]) or putty, make sure that they are completely cured.

GREEN CROSS Co., Ltd.

Urethane Foam Spray 750 ML　6300003708

Urethane foam filler for use in reverse direction.
When using connection paints (water-based oil-based [excluding lacquer-based]) or putty, make sure that they are completely cured.

GREEN CROSS Co., Ltd.

High-spec Urethane Foam Spray 515 ML　6300003709

Used up urethane foam filler.
It shoots freely 360 degrees.

Henkel Japan Ltd.

Poly Urethane foam Green foam　DGM-300

Excellent thermal insulation and energy-saving effect.
Environmentally friendly non-CFC type.

ABC Trading Co., Ltd.

One Component Poly Urethane Foam　ELASF

Elastic urethane foam that follows the movement of wood, resin, etc.
It can be constructed even at -5°C and is suitable for construction in cold regions.

ABC Trading Co., Ltd.

One Component Poly Urethane Foam　GFM600P

It is a non-CFC and non-VOC heat insulator with zero ozone depletion potential.
360°Can be used in any direction.

ABC Trading Co., Ltd.

One Component Poly Urethane Foam　IBF

Urethane foam containing termite-proof ingredients.
Thermal insulation, airtightness, and termite-proofing of wooden houses can be realized by this one piece.

ABC Trading Co., Ltd.

Two-liquid type Foam Urethane　IP30NF

The shoulder strap allows for easy construction.
It is a 2 liquid fast curing type and can be sprayed or filled.

ABC Trading Co., Ltd.

One Component Poly Urethane Foam and others

ABC Trading Co., Ltd.

One Component Poly Urethane Foam　NGSX

It is a non-CFC and non-VOC heat insulator with zero ozone depletion potential.
High foam type that expands 1.5 times more than normal urethane foam.

Henkel Japan Ltd.

Poly Urethane Foam　SWT-750

It has high dimensional stability after curing, so it exhibits thermal insulation and filling performance.
Since there are few large nests with fine texture, stable thermal insulation is realized.

Cemedine Co., Ltd.

High Speed Span Foam -400 410 ml (Urethane Foam Foam)　SE-118

Aerosol type 1-liquid urethane foam filling type.
It foams about 3 times.

ICHINEN TASCO CO., LTD.

Polyurethane Foam (For GUN Type)　TA907BR-10

It can be stored for 1~2 months as it is attached, and can be reused, so it can be used up to the end without waste.

ESCO Company Ltd.

Gun for Foamed Urethane Foam　EA930TC-10

Discharge amount can be adjusted by adjusting screw.
Clean with a cleaner (EA930 TC-16) after use.

ESCO Company Ltd.

Urethane Foam 1000g　EA930TC-12

Please use it upside down.
Be sure to use a dedicated gun (EA930 TC-10).

ESCO Company Ltd.

Cleaner for Urethane Foam Gun 500mL　EA930TC-16

ABC Trading Co., Ltd.

［Discontinued］1 Liquid Type simple Urethane Foam (nozzle filling Type) NEW-GS360340 g and others

ABC Trading Co., Ltd.

［Discontinued］1 Liquid Type simple Urethane Foam (nozzle filling Type)　GFM600

Nozzle fill type.
Has excellent workability because it can be discharged from all sides by adopting multi-angle.

ABC Trading Co., Ltd.

［Discontinued］2 liquid type simple Urethane Foam (aerosol Type)　IP30

The shoulder strap allows for easy construction.
Bi-liquid fast curing type that can be sprayed or filled.

Henkel Japan Ltd.

［Discontinued］Urethane Foam remover 200mL　SUR-200

Softens hardened urethane foam to make it easier to remove.
Can also be used as a paint remover.

ABC Trading Co., Ltd.

［Discontinued］2 liquid type simple Urethane Foam (standard Type) and others

JEFCOM

［Discontinued］Urethane Foam　AW-500

Foaming ratio: Approximately 30 times! rigid urethane foam

JEFCOM

［Discontinued］Urethane Foam　AW-NZ

Jetting nozzle for new wafer

ESCO Company Ltd.

［Discontinued］One-Liquid Type Foamed Urethane Foam　EA930TC-17

Use EA930TC-10 gun.
Tuck free/surface touching.

ESCO Company Ltd.

［Discontinued］Two-Liquid Urethane Foam 820g　EA930TB-2A

ESCO Company Ltd.

［Discontinued］One-Liquid Type Foamed Urethane Foam 570g　EA930TC-2

Can be used at any angle of 360°.

ESCO Company Ltd.

［Discontinued］One-Liquid Type Foamed Urethane Foam 600mL　EA930TC-4

ESCO Company Ltd.

［Discontinued］Spraying Foamed Urethane Foam 600mL　EA930TD-1

ESCO Company Ltd.

［Discontinued］1-liquid type urethane foam 400g　EA930TE-1

Aerosol type 1 liquid foam urethane fill type. It foams about twice as much.
Ideal for clearance, heat insulation and dew condensation prevention in piping.