BOEHM

Drilling Punch (Punch 29pcs Included) and others

ENGINEER. INC.

Punch　TZ-07

It is a necessity for accurate drilling.

HOZAN TOOL INDUSTRIAL CO., LTD.

Punch set　F-29-2

A tool for attaching the F-29-1 to a mat, etc. Jumper hook drilling and caulking are executed using one punch each.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 8mm and others

TRUSCO NAKAYAMA CORPORATION

Standard Die 43mm diameter 8mm and others

MIERASEN Co., Ltd.

Slots Punch (fujimura) 10 x 25mm and others

MIERASEN Co., Ltd.

Slots Die (takeda, Fujimura) 10 x 25mm and others

MIERASEN Co., Ltd.

Slots Punch (showa Seiko) 10 x 25mm and others

MIERASEN Co., Ltd.

Slots Die (showa Seiko) 10 x 25mm and others

TRUSCO NAKAYAMA CORPORATION

Belt Punch 1mm and others

TRUSCO NAKAYAMA CORPORATION

Punch Set 5 set and others

LIGHT SEIKI

Hex Shank Leather Bit Φ3 x 70mm and others

TOP KOGYO Co., Ltd.

Hand punch Set　PU-105

Can be used for drilling sheet metal, leather, etc.
Can not burr back and can be drilled cleanly.

H.H.H. MANUFACTURING CO.

Packing Punch Set 17 set　3H-P17

Since you can match the center, you can easily make a doughnut-shaped packing.
Comes in a special case for convenient storage and management.

Center Punch 10mm X 100mm and others

TRUSCO NAKAYAMA CORPORATION

Joses Punch 160mm and others

TRUSCO NAKAYAMA CORPORATION

Reaming Punch 17.5mm and others

Pin Punch 2.5mm X 150mm and others

KYOTO TOOL Co., Ltd.

Chucking rubber for knock pin punch and others

PB Swiss Tools

Center Punch and others

PB Swiss Tools

Parallel Pin Punch　715-4

The material is PB's unique special spring steel that promises high strength and long life.
Nickel chrome plating on the surface makes it easy to grip, has excellent rust resistance, and has a beautiful appearance.

PB Swiss Tools

Tapered Pin Punch and others

PB Swiss Tools

Parallel Pin Punch and others

PB Swiss Tools

Ponte Chisel Set Long　855BL

PB's unique special steel makes the cutting edge very sturdy and resistant to breakage, so chipping does not occur due to use.
The whole PB tagane is quenched and tempered.

Stahlwille

Taper Pin Punch (70060007) and others

Stahlwille

Center Punch (70050001) and others

Stahlwille

Punch Set (96700601)　104-56D

Set of 5 pin punch with plastic stand and center punch.

Stahlwille

Parallel Pin Punch Set (with Stand) (96700701)　1086D

Parallel pin punch set with plastic stand.

Stahlwille

Parallel Pin Punch (70071152) and others

Stahlwille

Pin Punch (70090001) and others

SIGNET

Pin punch Set 6PC　60501

Set of 6 parallel pin punches with beautiful mirror plating finish.
octagonal body.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 25.0mm　TUP-25.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 26.0mm　TUP-26.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 27.0mm　TUP-27.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 28.0mm　TUP-28.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Punch 30.0mm　TUP-30.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Die 43mm diameter 25.0mm　TUU-25.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Die 43mm diameter 26.0mm　TUU-26.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Die 43mm diameter 27.0mm　TUU-27.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.

TRUSCO NAKAYAMA CORPORATION

Standard Die 43mm diameter 28.0mm　TUU-28.0

Accurate drilling is possible.
Set in a special large ponching machine for round drilling of steel materials such as bridges and steel frames.