Electrostatic measuring instrument and charge checker
Filters
-
Electrostatic Measuring Equip Eye-02 EYE-02
It is a compact electrostatic meter that can measure ion balance and charging potential.
It comes with a "maximum value (peak value) display" function which is convenient for charging and "continuous measurement" of "work running at high speed" where numerical values are hard to be determined.1 products found
JPY: 94,200
USD: 590.49
-
Wrist Strap Tester 746
Because it can be mounted on a wall or installed on a work bench, it can be checked regularly, inspected before work, and recorded quickly and easily.
This tester can measure the total resistance value including the human body by simple operation.1 products found
JPY: 101,000
USD: 633.11
-
-
Ion balance plate for FG-450 B3585
Product Name: Ion Balance Plate (With Screws)
1 products found
JPY: 18,700
USD: 117.22
-
Body charging level measurement plate B3586
Product Name: Anthropometric Electrostatic Measurement Plate (With Screws)
1 products found
JPY: 50,600
USD: 317.18
-
Electrostatic level meter FG450-01
Electrostatic electricity level meter that can check the charging status of film, resin, etc. • Rotary sensor heads hold at 45 degrees each and rotate at 180 degrees, allowing you to set the display in a position that is easy to read in any situation.
An ion balance plate is included as standard, so you can use the ion balance plate as well as electrostatic potential measurement to check the static electricity removal device. The ion balance can be measured in 1V units.1 products found
JPY: 132,000
USD: 827.43
-
Static electricity level meter calibrated FG450-02
Electrostatic electricity level meter that can check the charging status of film, resin, etc. • Rotary sensor heads hold at 45 degrees each and rotate at 180 degrees, allowing you to set the display in a position that is easy to read in any situation.
An ion balance plate is included as standard, so you can use the ion balance plate as well as electrostatic potential measurement to check the static electricity removal device. The ion balance can be measured in 1V units.1 products found
JPY: 142,500
USD: 893.25
-
EP Sensor DTYEPS Series DTY-EPU-3LD
It has a small piezoelectric transformer and can be used to supply a constant voltage DC power supply. Blow type, fan type, bar type, etc. are available.
We have a lineup of sensors that are ideal for daily static electricity measurement management and fixed point monitoring of production lines.1 products found
JPY: 54,290
USD: 340.31
-
EP Sensor DTYEPS Series DTY-EPU-B-3LD
It has a small piezoelectric transformer and can be used to supply a constant voltage DC power supply. Blow type, fan type, bar type, etc. are available.
We have a lineup of sensors that are ideal for daily static electricity measurement management and fixed point monitoring of production lines.1 products found
JPY: 55,250
USD: 346.33
-
Monitor Continuous Multi Mount 19651
Constant monitoring of the wrist strap's grounding path and resistance detection in the range as low as 1 MΩ is more stable (compared to pulsed or intermittent).
An alarm sounds when a banana plug inserted into a worker's wrist strap cord or monitor jack is unexpectedly released.1 products found
JPY: 34,000
USD: 213.13
-
Wrist Strap & Shoes Checker w/Dual Foot Plate and others
2 products found
JPY: 103,960-
USD: 651.66-
-
Two Point Resistance Probe 19297
Probe for measuring resistance between 2 points (2 pins) for small area or small space
Gold plated spring load pin electrode with conductive rubber1 products found
JPY: 117,330
USD: 735.47
-
Low resistance tester 19249
Measure the ground resistance between the banana jack and other devices.
Select the test range of pass/fail: less than 1 Ω, less than 2 Ω, less than 10 Ω1 products found
JPY: 34,520
USD: 216.39
-
AC Adapter for Continuous Monitor IEC Plug 19258
Can be used in combination with Desco part numbers 19228, 19218 and 19247.
1 products found
JPY: 7,470
USD: 46.83
-
AC Adapter for Continuous Monitor 19260
Replacement adapters for the following Desco standards 19205, 19208, 19212, 19214, 19215, 19216, 19217, 19218 19220, 19222, 19226, 19228, 19230, 19232, 19246; 94343, 98227
Made in the USA as 100~120VAC adapter for constant monitor1 products found
JPY: 4,500
USD: 28.21
-
Tester for Wrist Strap 19350
Quick and easy installation to ground both the wrist strap and the workbench mat
Test all circuits including wrist strap, cord and skin contact1 products found
JPY: 23,300
USD: 146.05
-
Portable Test Kit Upgrade for Ionizers 19440
This is a portable tool for testing ionizers according to ANSI/ESD SP3.3.
Conductive plate and charger set.1 products found
JPY: 118,580
USD: 743.31
-
Charging Plate for Field Meter 19441
19492 Electrifying Plate for Digital Electrostatic Measurements
Made in the USA1 products found
JPY: 34,240
USD: 214.63
-
Conductive Current Tester 0 -10Ω 0 -600V AC/DC 35100
Batteries are not included. Two AAA batteries are required to test a non-power circuit
The low voltage lamp tests a non-power circuit1 products found
JPY: 10,250
USD: 64.25
-
Conductive Tester 0 -50 Ω with Acoustic 35135
Highly audible 2 kHz loud sound, easy to check the continuity of the electrical circuit
Probe: Up to 270 mm 3 V1 products found
JPY: 9,410
USD: 58.99
-
Surface Electrometer AS Mini2 AS-20
The use of a rotary sensor head makes it convenient and safe to measure from a narrow place or on a transport line.
The head part rotation angle is held at 180 degrees and 45 degrees each.1 products found
JPY: 67,600
USD: 423.75
-
[Discontinued]High-Voltage Live Line Alarm HX6
A buzzer sound is used to alarm the approach to the high voltage charging section.
Ideal for electrical work safety.1 products found
JPY: 14,975
USD: 93.87
-
[Discontinued]Petermoba PM-05B
It is a transfer tool that transfers minute parts by adhesive rubber at the tip.
It does not need to be pinched like tweezers, and can capture fine parts just by touching the tip of the capture plate, and can be dissociated just by pulling the sliding knob after transferring to a predetermined place.1 products found
JPY: 5,625
USD: 35.26
-
[Discontinued]Anti-static Shose / Liststrap Checker MES-300 MES-300
Electrostatic shoes can be checked individually on the left and right sides.
You can select the upper and lower limit of the judgment level.1 products found
JPY: 98,000
USD: 614.31
-
HOZAN TOOL INDUSTRIAL CO., LTD.
[Discontinued]Electrode (clothing) F-103
Measurement electrode for clothing that meets the standard for static electricity protection (RCJS, IEC).
Combined with F-100, resistance measurement of anti-static clothing is possible.1 products found
JPY: 10,400
USD: 65.19
-
HOZAN TOOL INDUSTRIAL CO., LTD.
[Discontinued]Wrist Straps Checker and others
2 products found
JPY: 22,600-
USD: 141.67-
-
HOZAN TOOL INDUSTRIAL CO., LTD.
[Discontinued]Electrostatic sampling Checker Z-201
For detecting static electricity.
A dedicated checker that checks for the presence of static electricity in the workplace.1 products found
JPY: 46,600
USD: 292.11
-
[Discontinued]EP Sensor DTYEPS Series front protective cover KB100
1 products found
JPY: 350
USD: 2.19
-
[Discontinued]Full-Time Continuous Monitor 100 V 19325
This is a single-station constant monitor for checking the ground condition of workers, work surfaces, and workers. • Waveform strain detection technology provides constant real-time monitoring of the worker's ground path and whether there is a 1 MΩ resistance. • Parking snap function. • Dual LED lamp and alarm sound function for monitoring workers and work tables. • Alarm signal. • Can be connected to an external relay (refer to relay box part number 50547). • Can be used in conjunction with a single-wire wrist strap. • Calibration unit for accurate on-site performance and conformity testing. Refer to Desco part number 98220. • NIST calibration certificate. • Made in the USA.
1 products found
JPY: 38,730
USD: 242.78
-
[Discontinued]Digital Static Field Meter 19492
This is a portable static electricity meter.
Accuracy is guaranteed even if you use it repeatedly.1 products found
JPY: 115,000
USD: 720.87
-
[Discontinued]HAKKO 498
Simply connect the ground wire and press the pad with your hand. If it passes, the green GOOD light will light and the buzzer will sound.
1 products found
JPY: 10,050
USD: 63.00
-
[Discontinued]HAKKO FG 460 100V flat type Plug FG460-81
It fully supports JIS T 8103:2010.
It can support the measurement of electrostatic shoes and conductive shoes from the old standard to the new standard.1 products found
JPY: 52,500
USD: 329.09
