MURATEC-KDS CORP.

Line laser Projector5　LLP-5

Use the laser to sharpen the guidelines where they cannot be marked.
With 3 rotating parts, it is possible to irradiate the line in any direction of 360 degrees, including up and down, left and right.

STS Corporation

Marking laser (Model Number:mL 7010)　ML-7010

The laser line is irradiated to position the work process.
Uses a 10 mW high-brightness laser element.

STS Corporation

Marking laser (cross line, Model Number:mLX2)　ML-X2

A cross laser line is emitted by one device.
Since it uses a 10 mW laser element, it emits bright laser lines.

TRUSCO NAKAYAMA CORPORATION

Cemented Carbide Automatic Punch 160mm and others

TRUSCO NAKAYAMA CORPORATION

Cemented Carbide Tips with Center Punch Length S type 77mm Diameter Φ8 and others

TRUSCO NAKAYAMA CORPORATION

Cemented Carbide automatic Punch S and others

Ohnishi Mfg.

Trusquin (surface Gauge) Round and others

TRUSCO NAKAYAMA CORPORATION

This steel Compass Length 100 yen Diameter 150 and others

PB Swiss Tools

Scribing Needle　700-190CN

The cutting edge is chrome vanadium alloy steel.
Chrome plated finish.

Stahlwille

Scribing Needle (77.1 million) and others

Shinwa Rules Co., Ltd.

Race knife A 6 Square and others

Shinwa Rules Co., Ltd.

Exchange needle 2 pieces race knife C and others

Shinwa Rules Co., Ltd.

Steel compass A 15 cm and others

Shinwa Rules Co., Ltd.

Steel Compass A -2 15 cm with Carbide Tip and others

Shinwa Rules Co., Ltd.

Single pass A 15 cm　73250

One of the tips of the legs is needle-like, and it is possible to make a kegaki even on the part where there is a step.

Shinwa Rules Co., Ltd.

Path A 15cm and others

Shinwa Rules Co., Ltd.

Path A 15cm and others

Shinwa Rules Co., Ltd.

Compass A 115 mm Drafting and others

Shinwa Rules Co., Ltd.

Divider A 115 mm for drafting and others

Shinwa Rules Co., Ltd.

Replacement needle divider for drafting　74458

Spare needle for divider drafting.

NIIGATA SEIKI CO., LTD.

Scribing needle 224 mm with Tip and others

NIIGATA SEIKI CO., LTD.

Precision Scribing needle 0.5 mm and others

NIIGATA SEIKI CO., LTD.

Pencil Milling, Needle Diameter 7.2 mm and others

NIIGATA SEIKI CO., LTD.

Scriber Set No.3　CTS-3

Store 3 items in a portable vinyl case
Necessary item for on-site work! This is a set with all carbide tips!

NIIGATA SEIKI CO., LTD.

Nogicon apply Vernier Caliper 150.200mm and others

NIIGATA SEIKI CO., LTD.

Compass with Tip 100 mm and others

NIIGATA SEIKI CO., LTD.

Steel Compass 100 mm and others

NIIGATA SEIKI CO., LTD.

Parallel hole path 150mm and others

NIIGATA SEIKI CO., LTD.

Round Regular path 200mm and others

NIIGATA SEIKI CO., LTD.

Piece path 150mm and others

NIIGATA SEIKI CO., LTD.

Spr Ring with Compass 150mm and others

NIIGATA SEIKI CO., LTD.

Spr Ring with hole path 150mm and others

NIIGATA SEIKI CO., LTD.

Spr Ring with round path 150mm and others

NIIGATA SEIKI CO., LTD.

With scale inner and outer Common caliper 100mm and others

NIIGATA SEIKI CO., LTD.

Square Surface Gauge and others

Rennsteig Tools, Inc.

Cemented Carbide Tips with Center Punch 3 x 120mm and others

Rennsteig Tools, Inc.

Automatic Center Punch 95mm and others

Rennsteig Tools, Inc.

Automatic Center Punch 90mm for a pair pin 3.5mm　439-129

Replacement pin for automatic center punch 430-229.

Rennsteig Tools, Inc.

Automatic Center Punch 125mm for a pair pin 4mm　439-130

Replacement pin for automatic center punch 430-230.

Rennsteig Tools, Inc.

Automatic Center Punch 130mm for a pair pin 6mm　439-131

Replacement pin for automatic center punch 430-231.