[TecMate] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Battery Charger Extension for Lead Acid Battery Charger O03
OptiMATE Charge Cable Extender. OptiMATE extension cables for use with OptiMate Battery Chargers with SAE connectors. A premium charge cable extenders with weather protected in-line connection system. Ideal for on-vehicle use in all normal and below freezing temperatures 6ft extender cable Thick copper 16 / 18 SWG cable Connector/cable rated at 15 Amps Electrical connections between cable and connector pins are fully sealed Accepts any rubber shroud designed for OptiMate SAE connector. Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cable to prevent Voltage drop
1 products found
JPY: 5,250
USD: 32.67
-
Battery Charge Cord for Power Sport Batteries Charger O01
2x Weatherproof rubber sealing caps, RED and BLACK and ringlet insulation is PVC moulded. Rubber sealing cap & shroud for OptiMate heavy duty SAE connector. OptiMATE Cable. Premium quick connect permanent battery lead with weather protected connection system and cable. Length -20in./50cm Fused permanent battery lead with ring lugs that fit motorcycle / power sport battery terminals with 1/4in. / M6 bolts Industry standard 2-pin SAE connector 15A fuse Cable max. rating: 5 Amp -40ﾟC/-40ﾟF very low temperature use; cable remains flexible at 'below freezing' temperatures
1 products found
JPY: 4,130
USD: 25.70
-
Cigarette Lighter Charger for Ø12mm BIKE/DIN, Ø21mm AUTO Socket Charger O02
Detachable rubber sleeve to form weatherproof joints with other OptiMate SAE accessory leads. Please check that your cigarette lighter is live when the ignition is OFF. The accessory plug lead is wired for NEGATIVE EARTH vehicles – if you have a positive earth vehicle, it is necessary to rewire the plug accordingly – this is a simple job as screw terminals are used. OptiMATE Accessory Plug Lead. Accessory Plug Lead to connect OptiMate Battery Chargers to cigarette lighter sockets or motorcycle power outlet sockets. It allows easy connection of an OptiMate to a car's cigarette lighter socket or a motorcycle's accessory socket. It is of particular use for any other vehicles where use of the standard fused permanent lead is not practical for any reason. Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 16 / 18 SWG cable Connector/cable rated at 15 Amps Electrical connections between cable and connector pins are fully sealed Rubber sealing shrouds enhance the weatherproof rating of connections Allows safe use of high amperage accessories like heated clothing / grips
1 products found
JPY: 9,190
USD: 57.18
-
Battery AC Adapter for TM-71 Charger O07
Removable weatherproof rubber cap. OptiMATE SAE to TM Converter Lead. Converter lead to connect your OptiMate with SAE-compatible connector to TM-accessories (as used with AccuMate and pre 2012 OptiMate models). Simply plug one end of the converter lead into a standard OptiMate TM lead (e.g. TM71 RS < 458-9349') 458-9349 and you can then use a newer OptiMate, or other SAE accessory). In this way, you can connect an SAE compatible OptiMate to a bike or car equipped with a TM lead. Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 16 / 18 SWG cable Connector/cable rated at 15 Amps Electrical connections between cable and connector pins are fully sealed Rubber sealing shrouds enhance the weatherproof rating of connections Allows safe use of high amperage accessories like heated clothing / grips
1 products found
JPY: 3,300
USD: 20.53
-
Battery Monitor for 12 Lead Acid V Charger O124
OptiMATE 12V LED Battery Monitor. Monitor charge of your stored power sport vehicle 12V lead-acid battery or confirm if the vehicle charging system is working correctly. Active charging system monitoring: 13.5V 'acceptable' and 14V 'good' levels Industry standard SAE charge port 3 LEDs display battery status for any 12V battery with a 4th LED for AGM & GEL sealed batteries Weather protected Length: 24in. / 60cm 15A fuse 1/4in. / M6 ringlets
1 products found
JPY: 8,800
USD: 54.75
-
［Discontinued］TecMate TS120N Battery Tester 12 V (Battery State of Charge) TS120N
OptiMate Test TS120 - Battery Monitor and Tester. OptiMate Test will display the battery rest Voltage, the charge system Voltage with the engine running and the cranking Voltage - effectively a load test using the vehicle's starter motor. OptiMate Test is an ideal tool to have in the toolchest for workshop use. Know 100% that your battery and charging system are both in good reliable condition. Totally weatherproof; Fast and easy to use. Check battery charge level. A low battery cranks (starts engine) poorly Start engine. OptiMate TEST records and indicates (for 20 sec) the lowest start volts With engine running, verify charging voltage from alternator and voltage regulator. OptiMate Test - A simple, affordable tester designed to be used with the standard OptiMate / AccuMate connection lead, as fitted to a large percentage of cars & bikes on the road, or with the supplied clamp lead
1 products found
JPY: 6,220
USD: 38.70
-
［Discontinued］TecMate TA20 Battery Tester 12 V (STD, AGM, GEL Batteries) TA20
TestMate AUTO - 200Ah battery Tester. TestMate 200Ah provides within seconds a professional assessment of the state of health, state of charge and CCA capability of a 12V battery. Tests the correct operation of the 12V charging/starting system of the vehicle Compact, light, and can be used in the workshop or at the sales counter Suitable for car, van, marine and all other 12V starter batteries up to 200Ah For all battery technologies: STD, AGM, GEL Easy to use: select battery type, capacity, then TEST
1 products found
JPY: 65,000
USD: 404.43
-
［Discontinued］TecMate TS126N Battery Tester 12.8V/13.2V (Lithium), 12V Lead Acid TS126N
OptiMate Test TS126 Battery Tester. OptiMate test TS126 Battery tester for all Lead-acid and LiFePO4 / LFP Lithium batteries. Connect clips to the battery and read the result Easy to follow instructions on rear panel of the tester Industry standard SAE 2-pin connector 100cm battery clip set Flashing indicator for discharged battery. The OptiMate battery tester s microprocessor draws very low power from the battery itself to determine and display battery status.Tests all 12V Lead-acid and 12.8V / 13.2V LiFePO4 (LFP) Lithium batteries and displays result that can be used to convey information to customer
1 products found
JPY: 17,100
USD: 106.40
