[APW] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
［Discontinued］Earthing Kit for use with IMRACK Fitted onto Chassis Supports 802-560005
IMRACK® 1400 Earthing Kit. Contains ten leads to earth all panels and doors, leaving extra leads to earth parts of the electronic equipment Has ring terminals at both ends to mount directly onto the earth studs on the panels 1.5mm steel Light grey RAL 7035 finish
1 products found
JPY: 4,330
USD: 26.94
-
［Discontinued］APW IMRAK 310 7U Server Cabinet 371 x 573 x 400mm 968-362950
IMRAK® 310. The IMRACK® 310 is a fast assembed strong yet lightweight enclosure. Supplied flat packed 19in and ETSI mounting methods Cable access top and bottom Fully ventilated Maximum static load 40kg Can be bayed above or adjacent to, to expand network, no additional baying kit required Simple cross patching (behind door) allows neat installation Cables are laid, not pulled (avoiding damage) Fibre friendly design allows increased bend radii Vast array of cable management options 360 degree access for easy cable installation Side, top covers and door fitted after installation Adjustable gland supplied with cable clamp - see 'Imnet Series Accessories' Range Width 573mm
1 products found
JPY: 30,200
USD: 187.90
-
［Discontinued］APW IMRAK 310 7U Server Cabinet 371 x 573 x 400mm VT941-287064
IMRAK® 310. The IMRACK® 310 is a fast assembed strong yet lightweight enclosure. Supplied flat packed 19in and ETSI mounting methods Cable access top and bottom Fully ventilated Maximum static load 40kg Can be bayed above or adjacent to, to expand network, no additional baying kit required Simple cross patching (behind door) allows neat installation Cables are laid, not pulled (avoiding damage) Fibre friendly design allows increased bend radii Vast array of cable management options 360 degree access for easy cable installation Side, top covers and door fitted after installation Adjustable gland supplied with cable clamp - see 'Imnet Series Accessories' Range Width 573mm
1 products found
JPY: 48,900
USD: 304.26
-
［Discontinued］APW IMRAK 310 12U Server Cabinet 593 x 573 x 400mm VT941-287070
IMRAK® 310. The IMRACK® 310 is a fast assembed strong yet lightweight enclosure. Supplied flat packed 19in and ETSI mounting methods Cable access top and bottom Fully ventilated Maximum static load 40kg Can be bayed above or adjacent to, to expand network, no additional baying kit required Simple cross patching (behind door) allows neat installation Cables are laid, not pulled (avoiding damage) Fibre friendly design allows increased bend radii Vast array of cable management options 360 degree access for easy cable installation Side, top covers and door fitted after installation Adjustable gland supplied with cable clamp - see 'Imnet Series Accessories' Range Width 573mm
1 products found
JPY: 65,560
USD: 407.91
-
［Discontinued］APW IMRAK 310 12U Server Cabinet 593 x 573 x 400mm 968-362955
IMRAK® 310. The IMRACK® 310 is a fast assembed strong yet lightweight enclosure. Supplied flat packed 19in and ETSI mounting methods Cable access top and bottom Fully ventilated Maximum static load 40kg Can be bayed above or adjacent to, to expand network, no additional baying kit required Simple cross patching (behind door) allows neat installation Cables are laid, not pulled (avoiding damage) Fibre friendly design allows increased bend radii Vast array of cable management options 360 degree access for easy cable installation Side, top covers and door fitted after installation Adjustable gland supplied with cable clamp - see 'Imnet Series Accessories' Range Width 573mm
1 products found
JPY: 35,300
USD: 219.64
-
［Discontinued］APW IMRAK 410 6U Server Cabinet 324 x 600 x 400mm 968-362962
IMRAK® 410. The IMRACK® 410 is fully welded wall mounted enclosure designed as the best and most cost-effective solution to overcome the problems of overheating, damaged data cabling, stressed fibre and illegal tampering. Inset mounting brackets provide cable management space in front and on both sides of the brackets Quick cable access via clip-top and base gland plates Lockable glass door with quick release reverse facility Pre-punched fan patterns in top and base covered by clip-in blanks provide ventilation options Fully welded frame is light but strong Maximum Static Load 40kg 19" or vertically mounted power strips Anthracite grey textured paint with trim appropriate to office environment Materials: 0.9mm steel, 4mm toughened glass Supplied fully assembled Standards: IEC297-2; DIN 41 494 part 7; DIN 41 494 part 1 (mounting dimensions); EN 60950; VDE 0100 Width 600mm *Please note the rear panel is bought seperately.
1 products found
JPY: 48,200
USD: 299.90
-
［Discontinued］APW IMRAK 410 9U Server Cabinet 457 x 600 x 400mm 968-362963
IMRAK® 410. The IMRACK® 410 is fully welded wall mounted enclosure designed as the best and most cost-effective solution to overcome the problems of overheating, damaged data cabling, stressed fibre and illegal tampering. Inset mounting brackets provide cable management space in front and on both sides of the brackets Quick cable access via clip-top and base gland plates Lockable glass door with quick release reverse facility Pre-punched fan patterns in top and base covered by clip-in blanks provide ventilation options Fully welded frame is light but strong Maximum Static Load 40kg 19" or vertically mounted power strips Anthracite grey textured paint with trim appropriate to office environment Materials: 0.9mm steel, 4mm toughened glass Supplied fully assembled Standards: IEC297-2; DIN 41 494 part 7; DIN 41 494 part 1 (mounting dimensions); EN 60950; VDE 0100 Width 600mm *Please note the rear panel is bought seperately.
1 products found
JPY: 50,200
USD: 312.34
-
［Discontinued］APW IMRAK 410 12U Server Cabinet 590 x 600 x 400mm 968-362964
IMRAK® 410. The IMRACK® 410 is fully welded wall mounted enclosure designed as the best and most cost-effective solution to overcome the problems of overheating, damaged data cabling, stressed fibre and illegal tampering. Inset mounting brackets provide cable management space in front and on both sides of the brackets Quick cable access via clip-top and base gland plates Lockable glass door with quick release reverse facility Pre-punched fan patterns in top and base covered by clip-in blanks provide ventilation options Fully welded frame is light but strong Maximum Static Load 40kg 19" or vertically mounted power strips Anthracite grey textured paint with trim appropriate to office environment Materials: 0.9mm steel, 4mm toughened glass Supplied fully assembled Standards: IEC297-2; DIN 41 494 part 7; DIN 41 494 part 1 (mounting dimensions); EN 60950; VDE 0100 Width 600mm *Please note the rear panel is bought seperately.
1 products found
JPY: 50,800
USD: 316.08
-
［Discontinued］APW IMRAK 410 6U Server Cabinet 324 x 600 x 500mm 968-362966
IMRAK® 410. The IMRACK® 410 is fully welded wall mounted enclosure designed as the best and most cost-effective solution to overcome the problems of overheating, damaged data cabling, stressed fibre and illegal tampering. Inset mounting brackets provide cable management space in front and on both sides of the brackets Quick cable access via clip-top and base gland plates Lockable glass door with quick release reverse facility Pre-punched fan patterns in top and base covered by clip-in blanks provide ventilation options Fully welded frame is light but strong Maximum Static Load 40kg 19" or vertically mounted power strips Anthracite grey textured paint with trim appropriate to office environment Materials: 0.9mm steel, 4mm toughened glass Supplied fully assembled Standards: IEC297-2; DIN 41 494 part 7; DIN 41 494 part 1 (mounting dimensions); EN 60950; VDE 0100 Width 600mm *Please note the rear panel is bought seperately.
1 products found
JPY: 60,130
USD: 374.13
-
［Discontinued］APW IMRAK 410 9U Server Cabinet 457 x 600 x 500mm 968-362967
IMRAK® 410. The IMRACK® 410 is fully welded wall mounted enclosure designed as the best and most cost-effective solution to overcome the problems of overheating, damaged data cabling, stressed fibre and illegal tampering. Inset mounting brackets provide cable management space in front and on both sides of the brackets Quick cable access via clip-top and base gland plates Lockable glass door with quick release reverse facility Pre-punched fan patterns in top and base covered by clip-in blanks provide ventilation options Fully welded frame is light but strong Maximum Static Load 40kg 19" or vertically mounted power strips Anthracite grey textured paint with trim appropriate to office environment Materials: 0.9mm steel, 4mm toughened glass Supplied fully assembled Standards: IEC297-2; DIN 41 494 part 7; DIN 41 494 part 1 (mounting dimensions); EN 60950; VDE 0100 Width 600mm *Please note the rear panel is bought seperately.
1 products found
JPY: 44,300
USD: 275.64
-
［Discontinued］19-inch Rear Panel, 15U, Black, Steel 968-362973
IMRAK® Wall Cabinet Accessories
1 products found
JPY: 22,020
USD: 137.01
-
［Discontinued］4 Fan Top Mount Fan Tray 806-3634596
IMRACK® 1400 Fan Trays. Top mounted Fan trays for IMRACK 1400 range of cabinets Does not occupy useable U height Blanking plates fitted in all unused positions Power lead not included 4 Fans fitted to each tray
1 products found
JPY: 34,900
USD: 217.15
-
［Discontinued］4 Fan Top Mount Fan Tray 806-3634597
IMRACK® 1400 Fan Trays. Top mounted Fan trays for IMRACK 1400 range of cabinets Does not occupy useable U height Blanking plates fitted in all unused positions Power lead not included 4 Fans fitted to each tray
1 products found
JPY: 39,080
USD: 243.16
-
［Discontinued］Braked Castor for use with 1400 Cabinet 806-3634599
IMRACK® 1400 Heavy Duty Braked Castor. Load per castor: 115kg (stated under average conditions, fitted to the rack bolt on mounting plates) Supplied in a pack of 4
1 products found
JPY: 12,000
USD: 74.66
-
［Discontinued］APW Grey 1U Shelf, 556mm x 483mm 806-3634603
IMRACK® 1400 Shelf Kit. Kits comprise of 1 chassis tray and 2 chassis supports Trays and supports manufactured from 1.6mm steel and painted RAL 7035. Chassis Tray. Correct depth for your installation may be selected without interfering with cabling or power distribution at the rear Slots in the tray allow for good airflow, and at the same time, offer a selection of fixing positions to allow modems and instruments to be screwed into position. Chassis Supports. May be varied along the depth of the rack When used with 19in. equipment they position cardframes accurately in line with U heights Horizontal sections of the supports are pre-punched to allow the chassis trays to be fitted without further drilling Nominal load rating is 50kg
1 products found
JPY: 10,400
USD: 64.71
-
［Discontinued］APW Grey 3U Shelf, 456mm x 441mm 806-3634602
IMRACK® 1400 Shelf Kit. Kits comprise of 1 chassis tray and 2 chassis supports Trays and supports manufactured from 1.6mm steel and painted RAL 7035. Chassis Tray. Correct depth for your installation may be selected without interfering with cabling or power distribution at the rear Slots in the tray allow for good airflow, and at the same time, offer a selection of fixing positions to allow modems and instruments to be screwed into position. Chassis Supports. May be varied along the depth of the rack When used with 19in. equipment they position cardframes accurately in line with U heights Horizontal sections of the supports are pre-punched to allow the chassis trays to be fitted without further drilling Nominal load rating is 50kg
1 products found
JPY: 7,770
USD: 48.35
-
［Discontinued］100 x 600 x 800mm Plinth for use with IMRAK IT Cabinet 802-592668
IMRACK® 1400 Plinth Kit. Consists of four identical corner sections and four infill sections which allow easy modification for cable entry Can be stacked to provide additional height Kit contains 4 plinth corners (2.0mm steel), 2 side trims and 2 front ; rear trims (1.0mm steel) Light grey RAL 7035 finish
1 products found
JPY: 15,400
USD: 95.82
-
［Discontinued］APW Chassis Support, 470mm Depth, 50kg Max Load 802-561010
IMRACK® 1400 Chassis Supports. Steel supports may be varied along the depth of the rack andoffer an ideal method of supporting heavy equipment When used in conjunction with 19 equipment they position cardframes accurately in line with U heights The horizontal sections of the supports are prepunched to allow the chassis trays to be fitted without further drilling. Nominal load rating is 50kg 1.5mm steel Light grey RAL 7035 finish Chassis supports are sold in pairs
1 products found
JPY: 2,670
USD: 16.61
-
［Discontinued］APW Chassis Support, 670mm Depth, 50kg Max Load 802-561011
IMRACK® 1400 Chassis Supports. Steel supports may be varied along the depth of the rack andoffer an ideal method of supporting heavy equipment When used in conjunction with 19 equipment they position cardframes accurately in line with U heights The horizontal sections of the supports are prepunched to allow the chassis trays to be fitted without further drilling. Nominal load rating is 50kg 1.5mm steel Light grey RAL 7035 finish Chassis supports are sold in pairs
1 products found
JPY: 3,640
USD: 22.65
-
［Discontinued］Fan Tray for use with VERAK S-MAX 19-Inch Standard Cabinet VT584-000218
VERAK S-MAX - Thermal Kits. Thermal Kits for the VERAK S-MAX include 6 way fan trays fitted with low noise Axial Fans
1 products found
JPY: 87,190
USD: 542.50
-
［Discontinued］Fan Tray for use with VERAK S-MAX 19-Inch Standard Cabinet VT584-000219
VERAK S-MAX - Thermal Kits. Thermal Kits for the VERAK S-MAX include 6 way fan trays fitted with low noise Axial Fans
1 products found
JPY: 50,200
USD: 312.34
-
［Discontinued］Thermostat and Wiring Kit for use with IMAGE Versatile Multi-Application Enclosure VK385-775843
VERAK S-MAX - Thermal Kits. Thermal Kits for the VERAK S-MAX include 6 way fan trays fitted with low noise Axial Fans
1 products found
JPY: 8,810
USD: 54.82
-
［Discontinued］APW Black 3U Shelf, 770mm x 483mm VT584-000134
VERAK S-MAX Shelves. Both Fixed and sliding shelves have load capacities of 100 kg
1 products found
JPY: 8,400
USD: 52.27
-
［Discontinued］APW Black 2U Shelf, 670mm x 483mm VT584-000133
VERAK S-MAX Shelves. Both Fixed and sliding shelves have load capacities of 100 kg
1 products found
JPY: 7,580
USD: 47.16
-
［Discontinued］APW Black 2U Shelf, 870mm x 483mm VT584-000135
VERAK S-MAX Shelves. Both Fixed and sliding shelves have load capacities of 100 kg
1 products found
JPY: 9,670
USD: 60.17
-
［Discontinued］Steel Cable Tray Kit for use with IMAGE Versatile Multi-Application Enclosure VT390-786032
VERAK S-MAX Cable Management. Cable Tray Kit. 42 U Colour Black. Window Channel Moulding. 125 mm long Colour Light Blue 10 off
1 products found
JPY: 6,440
USD: 40.07
-
［Discontinued］Earthing Kit for use with 19-Inch Cabinet VT802-560005
VERAK S-MAX General Accessories. A range of useful VERAK S-MAX specific accessories
1 products found
JPY: 6,490
USD: 40.38
-
［Discontinued］APW Black 2U Cantilever Shelf, 255mm x 483mm 968-338093
Compartmented Floors. Fixes to the rail 2HE assembly room is required Can support up to 20kg
1 products found
JPY: 7,630
USD: 47.47
-
［Discontinued］APW Black 2U Cantilever Shelf, 400mm x 441mm 968-338094
Compartmented Floors. Fixes to the rail 2HE assembly room is required Can support up to 20kg
1 products found
JPY: 8,220
USD: 51.15
