[Masach Technologies] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 18.3 x 10.5 x 3mm PCB Enclosure MS183-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 200
USD: 1.24
-
［Discontinued］Masach Tech MS, Tin Plated Steel PCB Enclosure MS-ENG-KIT21
Masach Drawn RF PCB shielding Engineering Kit. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. This could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design ensures high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 25,100
USD: 156.17
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 13.5 x 13.5 x 5.3mm PCB Enclosure MS135-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 210
USD: 1.31
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 21 x 12 x 5mm PCB Enclosure MS210-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 220
USD: 1.37
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 15.6 x 10.6 x 3mm PCB Enclosure MS156-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 530
USD: 3.30
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 23.3 x 17.5 x 3.3mm PCB Enclosure MS233-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 250
USD: 1.56
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 25.7 x 25.7 x 6.5mm PCB Enclosure MS257-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 270
USD: 1.68
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 22 x 19.3 x 3.3mm PCB Enclosure MS220-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 260
USD: 1.62
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 29.3 x 25.3 x 6.4mm PCB Enclosure MS293-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 290
USD: 1.80
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 26.3 x 16.8 x 4.5mm PCB Enclosure MS263-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 260
USD: 1.62
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 28.8 x 19.4 x 5mm PCB Enclosure MS288-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 250
USD: 1.56
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 31.2 x 30 x 5mm PCB Enclosure MS312-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 320
USD: 1.99
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 32.3 x 23.8 x 3.7mm PCB Enclosure MS323-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 530
USD: 3.30
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 32.3 x 23.8 x 4.7mm PCB Enclosure MS323-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 530
USD: 3.30
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 34.5 x 23.3 x 3.5mm PCB Enclosure MS345-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 250
USD: 1.56
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 35.3 x 20 x 6.4mm PCB Enclosure MS353-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 270
USD: 1.68
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 32.3 x 23.8 x 9mm PCB Enclosure MS323-30
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 310
USD: 1.93
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 36.6 x 34.1 x 3.6mm PCB Enclosure MS366-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 280
USD: 1.74
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 35.3 x 22.3 x 6.4mm PCB Enclosure MS353-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 260
USD: 1.62
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 35.5 x 19 x 5.5mm PCB Enclosure MS355-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 270
USD: 1.68
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 38.4 x 37.6 x 11mm PCB Enclosure MS384-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 310
USD: 1.93
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 40 x 18.3 x 4mm PCB Enclosure MS400-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 290
USD: 1.80
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 41.5 x 16.8 x 6.8mm PCB Enclosure MS415-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 270
USD: 1.68
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 51.1 x 25.7 x 6.5mm PCB Enclosure MS511-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 310
USD: 1.93
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 45.3 x 16.2 x 6mm PCB Enclosure MS453-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 720
USD: 4.48
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 47.7 x 18.2 x 4mm PCB Enclosure MS477-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 300
USD: 1.87
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 51.1 x 38.4 x 6.5mm PCB Enclosure MS511-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 310
USD: 1.93
-
［Discontinued］Masach Tech MS, Tin Plated Steel, 54.4 x 23.9 x 7.5mm PCB Enclosure MS544-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 350
USD: 2.18
-
［Discontinued］Masach Tech, Tin Plated Steel, 13 x 13 x 5mm PCB Enclosure MS130-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 210
USD: 1.31
-
［Discontinued］Masach Tech, Tin Plated Steel, 22 x 17.7 x 3mm PCB Enclosure MS220-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 210
USD: 1.31
-
［Discontinued］Masach Tech, Tin Plated Steel, 25.9 x 25.9 x 3mm PCB Enclosure MS259-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 270
USD: 1.68
-
［Discontinued］Masach Tech, Tin Plated Steel, 22.3 x 17.3 x 5mm PCB Enclosure MS223-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 220
USD: 1.37
-
［Discontinued］Masach Tech, Tin Plated Steel, 23.3 x 14.5 x 3mm PCB Enclosure MS233-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 770
USD: 4.79
-
［Discontinued］Masach Tech, Tin Plated Steel, 33.8 x 30.3 x 3.3mm PCB Enclosure MS338-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 290
USD: 1.80
-
［Discontinued］Masach Tech, Tin Plated Steel, 41.5 x 26.5 x 9.5mm PCB Enclosure MS415-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 300
USD: 1.87
-
［Discontinued］Masach Tech, Tin Plated Steel, 44.8 x 18.2 x 3mm PCB Enclosure MS448-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 1,100
USD: 6.84
-
［Discontinued］Masach Tech, Tin Plated Steel, 48.3 x 44.3 x 4.4 mm PCB Enclosure MS483-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 330
USD: 2.05
-
［Discontinued］Masach Tech, Tin Plated Steel, 59.3 x 20.6 x 2.8 mm PCB Enclosure MS593-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 280
USD: 1.74
-
［Discontinued］Masach Tech, Tin Plated Steel, 44.8 x 18.2 x 5.7mm PCB Enclosure MS448-20
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 1,100
USD: 6.84
-
［Discontinued］Masach Tech, Tin Plated Steel, 73.7 x 28.1 x 2.9mm PCB Enclosure MS737-10
The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. ; 826-6740 826-6740. Masach Drawn RF PCB shielding. The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled. A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference. The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields. Features ; Benefits. Suitable for high frequency applications The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary 2 piece design Robust construction Seamless protective cage Optimal planarity
1 products found
JPY: 360
USD: 2.24
