[Camloc by Alcoa] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Camloc by Alcoa Thread Repair Insert, M5 x 0.8, Drill Size 5.5mm KNM5X0.8
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 17,400
USD: 108.26
-
Camloc by Alcoa Thread Repair Insert, M6 x 1, Drill Size 7.5mm KNM6X1.0
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 17,900
USD: 111.37
-
Camloc by Alcoa Thread Repair Insert, M12 x 1.75, Drill Size 13.5mm KNM12X1.75
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 12,800
USD: 79.64
-
Camloc by Alcoa Thread Repair Insert, M8 x 1.25, Drill Size 9.5mm KNM8X1.25
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 18,600
USD: 115.73
-
Camloc by Alcoa M12 x 1.75 Threaded Insert Hand Tool KRTM12-01
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 34,500
USD: 214.66
-
Camloc by Alcoa M10 x 1.5 Threaded Insert Hand Tool KRTM10-01
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 35,600
USD: 221.50
-
Camloc by Alcoa Thread Repair Insert, M10 x 1.5, Drill Size 13.5mm KNHM10X1.5
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 15,400
USD: 95.82
-
Camloc by Alcoa Thread Repair Insert, M6 x 1, Drill Size 9.5mm KNHM6X1.0
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 23,100
USD: 143.73
-
Camloc by Alcoa Thread Repair Insert, M8 x 1.25, Drill Size 11.5mm KNHM8X1.25
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 24,300
USD: 151.20
-
Camloc by Alcoa Thread Repair Insert, M12 x 1.75, Drill Size 15.5mm KNHM12X1.75
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 16,400
USD: 102.04
-
Camloc by Alcoa M5 x 0.8 Threaded Insert Hand Tool KRTM5-01
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 30,500
USD: 189.77
-
Camloc by Alcoa M6 x 1 Threaded Insert Hand Tool KRTM6-01
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 31,500
USD: 195.99
-
Camloc by Alcoa M8 x 1.25 Threaded Insert Hand Tool KRTM8-01
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 34,500
USD: 214.66
-
Camloc by Alcoa M6 x 1 Threaded Insert Hand Tool KRTM6-02
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 31,500
USD: 195.99
-
Camloc by Alcoa M10 x 1.5 Threaded Insert Hand Tool KRTM10-02
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 34,500
USD: 214.66
-
Camloc by Alcoa M12 x 1.75 Threaded Insert Hand Tool KRTM12-02
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 34,500
USD: 214.66
-
Camloc by Alcoa M8 x 1.25 Threaded Insert Hand Tool KRTM8-02
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 34,500
USD: 214.66
-
［Discontinued］Camloc by Alcoa Thread Repair Insert, M10 x 1.5, Drill Size 11.5mm KNM10X1.5
Keenserts Inserts. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps.. Manufactured from stainless steel Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials In thread repair use, the defect thread can be replaced with the same nominal diameter Significantly increases load capability in weaker materials Special keys lock the Keensert into place eliminating rotation Easy to install no special taps required and no tangs to remove High resistance to torque out and pull out Camloc Inserts & Tools available in lightweight & heavy duty versions. KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers < 668-4667') 668-4667/, < 668-4676') 668-4676/, < 668-4663') 668-4663/, < 668-4708') 668-4708/,< 668-4679') 668-4679/, < 668-4705') 668-4705/, < 668-4702') 668-4702/, < 668-4673') 668-4673/, < 668-4711') 668-4711/. The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place. Drilling and tapping can be done without any specialist equipment, just standard drills and taps. For a range of installation tools see stock numbers: < 668-4685') 668-4685/,< 668-4724') 668-4724/,< 668-4720') 668-4720/, < 668-4727') 668-4727/, < 668-4718') 668-4718/,< 668-4698') 668-4698/, < 668-4689') 668-4689/, < 668-4682') 668-4682/, < 668-4691') 668-4691/
1 products found
JPY: 7,520
USD: 46.79
