AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us

[INA] AllProducts

Lab Instruments & Supplies

Electronic/Electrical Parts and Controll Equipments
Result: 622product groups
Showing 1 to 40 entries
  • by Product group
  • by Product

Sort by:

  • 12mm Radial Ball Bearing 47.3mm O.D　RABRB12/47FA106

    INA

    12mm Radial Ball Bearing 47.3mm O.D　RABRB12/47FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 10,400

    USD: 64.71

    view product detail

  • 15mm Radial Ball Bearing 47.3mm O.D　RABRB15/47FA106

    INA

    15mm Radial Ball Bearing 47.3mm O.D　RABRB15/47FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 10,400

    USD: 64.71

    view product detail

  • 20mm Radial Ball Bearing 52.3mm O.D　RABRB20/52FA106

    INA

    20mm Radial Ball Bearing 52.3mm O.D　RABRB20/52FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 11,500

    USD: 71.55

    view product detail

  • 25mm Radial Ball Bearing 62.2mm O.D　RABRB25/62FA106

    INA

    25mm Radial Ball Bearing 62.2mm O.D　RABRB25/62FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 13,200

    USD: 82.13

    view product detail

  • 30mm Radial Ball Bearing 72.2mm O.D　RABRB30/72FA106

    INA

    30mm Radial Ball Bearing 72.2mm O.D　RABRB30/72FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 16,000

    USD: 99.55

    view product detail

  • 35mm Radial Ball Bearing 80.2mm O.D　RABRB35/80FA106

    INA

    35mm Radial Ball Bearing 80.2mm O.D　RABRB35/80FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 18,300

    USD: 113.86

    view product detail

  • 40mm Radial Ball Bearing 85mm O.D　RABRB40/85FA106

    INA

    40mm Radial Ball Bearing 85mm O.D　RABRB40/85FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 21,200

    USD: 131.91

    view product detail

  • 50mm Radial Ball Bearing 100.2mm O.D　RABRB50/100FA106

    INA

    50mm Radial Ball Bearing 100.2mm O.D　RABRB50/100FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 27,100

    USD: 168.62

    view product detail

  • 25mm Radial Ball Bearing 52mm O.D　RAE25-XL-NPP-FA106

    INA

    25mm Radial Ball Bearing 52mm O.D　RAE25-XL-NPP-FA106

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 9,400

    USD: 58.49

    view product detail

  • 25mm Radial Ball Bearing 52mm O.D　RAE25-XL-NPP-B

    INA

    25mm Radial Ball Bearing 52mm O.D　RAE25-XL-NPP-B

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 8,210

    USD: 51.08

    view product detail

  • 30mm Radial Ball Bearing 62mm O.D　RAE30-XL-NPP-FA106

    INA

    30mm Radial Ball Bearing 62mm O.D　RAE30-XL-NPP-FA106

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 11,300

    USD: 70.31

    view product detail

  • 30mm Radial Ball Bearing 62mm O.D　RAE30-XL-NPP-B

    INA

    30mm Radial Ball Bearing 62mm O.D　RAE30-XL-NPP-B

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 10,900

    USD: 67.82

    view product detail

  • INA Spherical Bearing RAE35-NPP-B　RAE35-NPP-B

    INA

    INA Spherical Bearing RAE35-NPP-B　RAE35-NPP-B

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 12,000

    USD: 74.66

    view product detail

  • 40mm Radial Ball Bearing 80mm O.D　RAE40-XL-NPP-FA106

    INA

    40mm Radial Ball Bearing 80mm O.D　RAE40-XL-NPP-FA106

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 16,700

    USD: 103.91

    view product detail

  • 40mm Radial Ball Bearing 80mm O.D　RAE40-XL-NPP-B

    INA

    40mm Radial Ball Bearing 80mm O.D　RAE40-XL-NPP-B

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 14,500

    USD: 90.22

    view product detail

  • 20mm Radial Ball Bearing 42mm O.D　RALE20-XL-NPP-FA106

    INA

    20mm Radial Ball Bearing 42mm O.D　RALE20-XL-NPP-FA106

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 7,460

    USD: 46.42

    view product detail

  • 25mm Radial Ball Bearing 47mm O.D　RALE25-XL-NPP

    INA

    25mm Radial Ball Bearing 47mm O.D　RALE25-XL-NPP

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 8,020

    USD: 49.90

    view product detail

  • 30mm Radial Ball Bearing 55mm O.D　RALE30-XL-NPP-FA106

    INA

    30mm Radial Ball Bearing 55mm O.D　RALE30-XL-NPP-FA106

    Radial Insert Ball Bearings with Eccentric Locking Collar. INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage. Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. In addition to bearings with a spherical outer ring (GRAE.-NPP-B and GE.-KRR-B), there are also cylindrical (RAE.-NPP and RALE.-NPP). Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Protected against fretting corrosion. Shaft diameters from 12 mm to 60 mm (RAE.NPP) and (GRAE.-NPP-B). Shaft diameters from 20 mm to 30 mm (RALE.NPP). Shaft diameters from 17 mm to 120 mm (GE.-KRR-B). Suffixes. FA106 - Bearing subjected to special noise testing. B - Bearing with special outer ring. NPP - Lip seals on both sides (P type seal). KRR - Lip seals on both sides (R type seal)

    1 products found

    JPY: 9,640

    USD: 59.98

    view product detail

  • 46mm Radial Ball Bearing 46mm O.D　RCRA20/46FA106

    INA

    46mm Radial Ball Bearing 46mm O.D　RCRA20/46FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 10,700

    USD: 66.58

    view product detail

  • 25mm Radial Ball Bearing 57.3mm O.D　RCRB25/57FA106

    INA

    25mm Radial Ball Bearing 57.3mm O.D　RCRB25/57FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 13,200

    USD: 82.13

    view product detail

  • 30mm Radial Ball Bearing 65.1mm O.D　RCSMA30/65FA106

    INA

    30mm Radial Ball Bearing 65.1mm O.D　RCSMA30/65FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 17,200

    USD: 107.02

    view product detail

  • 15mm Radial Ball Bearing 65.1mm O.D　RCSMB15/65FA106

    INA

    15mm Radial Ball Bearing 65.1mm O.D　RCSMB15/65FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 11,600

    USD: 72.18

    view product detail

  • 17mm Radial Ball Bearing 65.1mm O.D　RCSMB17/65FA106

    INA

    17mm Radial Ball Bearing 65.1mm O.D　RCSMB17/65FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 11,800

    USD: 73.42

    view product detail

  • 20mm Radial Ball Bearing 65.1mm O.D　RCSMB20/65FA106

    INA

    20mm Radial Ball Bearing 65.1mm O.D　RCSMB20/65FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 12,700

    USD: 79.02

    view product detail

  • 25mm Radial Ball Bearing 65.1mm O.D　RCSMB25/65FA106

    INA

    25mm Radial Ball Bearing 65.1mm O.D　RCSMB25/65FA106

    Radial Insert Ball Bearings with Rubber Interliner. INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded. To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring. Used in narrow radial insert ball bearings with inner ring extended on one side. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Inner ring and locking collar have anti-corrosion protection. Shaft diameters from 12 mm to 50 mm (RABRB). Shaft diameters 20 mm (RCRA) 25 mm (RCRB). Shaft diameters 30 mm (RCSMA) 15 mm to 25 mm (RCSMB). Product Application Information. Bearings with rubber interliners cannot be lubricated. Suffixes. FA106 - Bearing subjected to special noise testing

    1 products found

    JPY: 14,100

    USD: 87.73

    view product detail

  • 12mm Angular Contact Ball Bearing 28mm O.D　30012RS

    INA

    12mm Angular Contact Ball Bearing 28mm O.D　30012RS

    Angular Contact Ball Bearings. INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Sealed. Suffixes. 2RS - Contact seals on both sides

    1 products found

    JPY: 13,000

    USD: 80.89

    view product detail

  • 20mm Angular Contact Ball Bearing 42mm O.D　30042RS

    INA

    20mm Angular Contact Ball Bearing 42mm O.D　30042RS

    Angular Contact Ball Bearings. INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Sealed. Suffixes. 2RS - Contact seals on both sides

    1 products found

    JPY: 13,300

    USD: 82.75

    view product detail

  • 25mm Angular Contact Ball Bearing 47mm O.D　30052RS

    INA

    25mm Angular Contact Ball Bearing 47mm O.D　30052RS

    Angular Contact Ball Bearings. INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Sealed. Suffixes. 2RS - Contact seals on both sides

    1 products found

    JPY: 14,200

    USD: 88.35

    view product detail

  • 35mm Angular Contact Ball Bearing 62mm O.D　30072RS

    INA

    35mm Angular Contact Ball Bearing 62mm O.D　30072RS

    Angular Contact Ball Bearings. INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Sealed. Suffixes. 2RS - Contact seals on both sides

    1 products found

    JPY: 21,100

    USD: 131.28

    view product detail

  • 40mm Angular Contact Ball Bearing 80mm O.D　30082RS

    INA

    40mm Angular Contact Ball Bearing 80mm O.D　30082RS

    Angular Contact Ball Bearings. INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Sealed. Suffixes. 2RS - Contact seals on both sides

    1 products found

    JPY: 25,200

    USD: 156.79

    view product detail

  • Stud Track Roller KR16PPA, 6mm ID, 16mm OD　KR16PPA

    INA

    Stud Track Roller KR16PPA, 6mm ID, 16mm OD　KR16PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 15,300

    USD: 95.20

    view product detail

  • Stud Track Roller KR19PPA, 8mm ID, 19mm OD　KR19PPA

    INA

    Stud Track Roller KR19PPA, 8mm ID, 19mm OD　KR19PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 16,100

    USD: 100.17

    view product detail

  • Stud Track Roller KR22PPA, 10mm ID, 22mm OD　KR22PPA

    INA

    Stud Track Roller KR22PPA, 10mm ID, 22mm OD　KR22PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 17,000

    USD: 105.77

    view product detail

  • Stud Track Roller KR26PPA, 10mm ID, 26mm OD　KR26PPA

    INA

    Stud Track Roller KR26PPA, 10mm ID, 26mm OD　KR26PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 17,900

    USD: 111.37

    view product detail

  • Stud Track Roller KR30PPA, 12mm ID, 30mm OD　KR30PPA

    INA

    Stud Track Roller KR30PPA, 12mm ID, 30mm OD　KR30PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 21,300

    USD: 132.53

    view product detail

  • Stud Track Roller KR32PPA, 12mm ID, 32mm OD　KR32PPA

    INA

    Stud Track Roller KR32PPA, 12mm ID, 32mm OD　KR32PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 22,600

    USD: 140.62

    view product detail

  • Stud Track Roller KR35PPA, 16mm ID, 35mm OD　KR35PPA

    INA

    Stud Track Roller KR35PPA, 16mm ID, 35mm OD　KR35PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 25,400

    USD: 158.04

    view product detail

  • Stud Track Roller KR40PPA, 18mm ID, 40mm OD　KR40PPA

    INA

    Stud Track Roller KR40PPA, 18mm ID, 40mm OD　KR40PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 29,800

    USD: 185.42

    view product detail

  • Stud Track Roller KR47PPA, 20mm ID, 47mm OD　KR47PPA

    INA

    Stud Track Roller KR47PPA, 20mm ID, 47mm OD　KR47PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 38,700

    USD: 240.79

    view product detail

  • Stud Track Roller KR52PPA, 20mm ID, 52mm OD　KR52PPA

    INA

    Stud Track Roller KR52PPA, 20mm ID, 52mm OD　KR52PPA

    Stud Type Track Rollers. INA from Schaeffler stud type track rollers are similar in their construction to single and double row yoke type track rollers. The raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads as well as axial loads arising from slight misalignment and skewed running. Stud type track rollers with a crowned outside surface are predominantly used since they are often inclined in relation to the mating track and edge stresses must be avoided. Features and Benefits. Lower operating costs. Reduced maintenance due to improved lubrication. Lower heat generation. Less noise. Lower Hertzian pressure. Edge loading under tilting is lower. Wear of the mating track is reduced. Operating life of the mating track is extended. KR.PP have a cage and plastic axial plain washers with formed seal lips on both sides. NUKR have a full complement cylindrical roller set and labyrinth seals. Product Application Information. Stud type track rollers are suitable for applications such as cam gears, bed ways and conveying equipment. Suffixes. PP - Plastic axial plain washer with formed seal lip on both sides of the stud type track roller, giving a three-stage seal

    1 products found

    JPY: 39,600

    USD: 246.39

    view product detail

This page is the product list of【INA】. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.

powered by FORCIA