[Rabbit Semiconductor]Electronic/Electrical Parts and Controll Equipments
Filters
-
［Discontinued］Rabbit Semiconductor Rabbit 3000 CP 44.2MHz Core Module, 3.15 → 3.45V 20-101-0520
RCM3200 RabbitCore® Single-Board Controller. The RCM3200 RabbitCore processor module offers the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. 44.2MHz Rabbit 3000 MPU with low-power 'Sleepy' modes. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 512KB program execution SRAM. On-board 256KB data SRAM (battery-backable). Watchdog supervisor. 52 x GPIO ports. Up to 6 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. 10/100 Ethernet connectivity via RJ45 socket. Battery-backable Real-Time Clock (RTC). Connectors: 2 x 34-pin signal headers, 10-pin programming header. Power supply: +3.3Vdc @ 255mA. Operating temperature range: 0 to +70°C. Dimensions: 69 x 47 x 22mm
1 products found
JPY: 464,000
USD: 2,908.54
-
［Discontinued］Rabbit Semiconductor Rabbit 3000 CP 22MHz Core Module, 5V 20-101-0672
RCM3600 RabbitCore® Industrial Single-Board Controller. The RCM3600 RabbitCore processor module offers features and performance for general purpose embedded control systems at low cost. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. 22MHz Rabbit 3000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 33 x GPIO ports. Up to 4 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. Battery-backable Real-Time Clock (RTC). Connectors: 40-pin signal header, 10-pin programming header. Power supply: +5Vdc @ 60mA. Operating temperature range: -40 to +85°C. Dimensions: 54 x 31 x 16mm
1 products found
JPY: 317,000
USD: 1,987.09
-
［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 58.98MHz Core Module, 3 → 3.6V dc 20-101-1138
RCM4300 RabbitCore® Industrial Single-Board Controller. The RCM4300 RabbitCore processor module offers the features and performance to support data encryption, secure data transmission and web server applications. The RCM4300 module provides the capability to use up to 1GB mass storage with the industry-standard miniSD™ memory cards which can be 'hot-swapped' without powering down the module. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The RCM4300 supports a FAT file system for mass storage with the on-board SD card. Also supported are RabbitWeb for creating dynamic HTML interfaces, and Rabbit ‘s Transport Layer Security (TLS/SSL) implementation for secure web transactions. 58.98MHz Rabbit 4000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 2MB serial Flash program memory. On-board 1MB program execution SRAM. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 28 x GPIO ports. Up to 5 x serial ports. 8-channel 12-bit ADC inputs (or 4-channel 11-bit Differential inputs). 4 x PWM outputs. 2 x Quadrature Encoder inputs. 10/100 Ethernet connectivity via RJ45 socket. MiniSD card slot (up to 1GB). Battery-backable Real-Time Clock (RTC). Connectors: 50-pin IDC signal header, 10-pin IDC programming header. Power supply: +3.3Vdc @ 350mA. Operating temperature range: -20 to +85°C (without SD card). Dimensions: 72 x 47 x 21mm
1 products found
JPY: 222,170
USD: 1,392.65
-
［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 59MHz Core Module, 3 → 3.6V dc 20-101-1112
RCM4010 RabbitCore® module. The RCM4000 microprocessor core module is a powerful embedded Ethernet control device that has the intelligence and internet connectivity that allows your devices to be remotely monitored and controlled from anywhere in the world. Rabbit® 4000 microprocessor with Integrated Ethernet Clock speed at 58.98MHz with 16-bit memory 32MB NAND flash for data 8 channel 12-bit A/D converter 25 digital I/O lines
1 products found
JPY: 371,000
USD: 2,325.58
-
［Discontinued］Rabbit Semiconductor Rabbit 4000 CP 59MHz Core Module, 3 → 3.6V 20-101-1131
RCM4200 RabbitCore® Industrial Single-Board Controller. The RCM 4200 RabbitCore processor module offers the features and performance to support data encryption, secure data transmission and web server applications. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The module supports RabbitWeb for creating dynamic HTML interfaces and Rabbit ‘s Transport Layer Security (TLS/SSL) implementation for secure web transactions. 58.98MHz Rabbit 4000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 8MB serial mass-storage Flash memory. On-board 512KB program execution SRAM. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 25 x GPIO ports. Up to 4 x serial ports. 8-channel 12-bit ADC inputs (or 4-channel 11-bit Differential inputs). 3 x PWM outputs. 1 x Quadrature Encoder input. 10/100 Ethernet connectivity via RJ45 socket. Battery-backable Real-Time Clock (RTC). Connectors: 50-pin IDC signal header, 10-pin IDC programming header. Power supply: +3.3Vdc @ 240mA. Operating temperature range: -40 to +85°C. Dimensions: 61 x 47 x 21mm
1 products found
JPY: 585,000
USD: 3,667.02
-
［Discontinued］Rabbit Semiconductor Rabbit 3000 CP 30MHz Core Module, 3.15 → 3.45V 20-101-0507
RCM3000 RabbitCore® Industrial Single-Board Controller. The RCM 3000 RabbitCore processor module offers the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The module supports RabbitWeb for creating dynamic HTML interfaces and AES-128 encryption for secure web transactions. 29.4MHz Rabbit 3000 MPU with low-power 'Sleepy' modes. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board 512KB data SRAM (battery-backable). Watchdog supervisor. 52 x GPIO ports. Up to 7 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. 10Base-T Ethernet connectivity via RJ45 socket. Battery-backable Real-Time Clock (RTC). Connectors: 2 x 34-pin signal headers, 10-pin programming header. Power supply: +3.3Vdc @ 150mA. Operating temperature range: -40 to +70°C. Dimensions: 69 x 47 x 22mm
1 products found
JPY: 241,000
USD: 1,510.69
-
［Discontinued］Rabbit Semiconductor Rabbit 6000 Microprocessor CP 200MHz Memory Module 20-101-1318
RCM67xx MiniCore™ Industrial Embedded Device Servers. The ultra-compact MiniCore RCM67xx is ideal for today ‘s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as PWM. Furthermore, the RCM 67xx series offers a much greater feature set than comparable device servers at a lower cost. The programming environment, Dynamic C, is an ANSI C compatible development environment that provides a royalty free TCP/IP stack and WiFi support. Various protocols such as ZigBee, Modbus and BACnet are also supported to help reduce development costs and time-to-market. In addition to processor and protocol support, Dynamic C supports the iDigi® platform which provides remote firmware updates and data storage for greater device control and monitoring. Rabbit 6000 microprocessor running at up to 200MHz 1MB of internal SRAM for program/data storage Up to 4MB of serial Flash memory for data logging or web page storage 32KB battery-backable SRAM 10/100 Ethernet LAN supported Pin-compatible with MiniCore IEEE 802.11b/g wireless modules Flexible Interface Module (FIM) provides protocol support for CAN bus or SD/SDIO 52-pin Mini PCIe edge connector Power supply: +3.3Vdc Operating temperature range: -40 to +85°C Dimensions: 30 x 51mm iDigi platform provides cost-effective cloud computing for remote device management. RS Product Codes. ; 761-7361 761-7361 RCM6700 1MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7365 761-7365 RCM6710 1MB Flash memory, RJ45 Ethernet socket fitted. ; 761-7374 761-7374 RCM6750 4MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7377 761-7377 RCM6760 4MB Flash memory, RJ45 Ethernet socket fitted. Development Kits. ; 761-7359 761-7359 Standard Development Kit for RCM6700. ; 761-7368 761-7368 DeLuxe Development Kit for RCM6700
1 products found
JPY: 226,000
USD: 1,416.66
-
［Discontinued］Rabbit Semiconductor Rabbit 6000 Microprocessor CP 200MHz Memory Module 20-101-1320
RCM67xx MiniCore™ Industrial Embedded Device Servers. The ultra-compact MiniCore RCM67xx is ideal for today ‘s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as PWM. Furthermore, the RCM 67xx series offers a much greater feature set than comparable device servers at a lower cost. The programming environment, Dynamic C, is an ANSI C compatible development environment that provides a royalty free TCP/IP stack and WiFi support. Various protocols such as ZigBee, Modbus and BACnet are also supported to help reduce development costs and time-to-market. In addition to processor and protocol support, Dynamic C supports the iDigi® platform which provides remote firmware updates and data storage for greater device control and monitoring. Rabbit 6000 microprocessor running at up to 200MHz 1MB of internal SRAM for program/data storage Up to 4MB of serial Flash memory for data logging or web page storage 32KB battery-backable SRAM 10/100 Ethernet LAN supported Pin-compatible with MiniCore IEEE 802.11b/g wireless modules Flexible Interface Module (FIM) provides protocol support for CAN bus or SD/SDIO 52-pin Mini PCIe edge connector Power supply: +3.3Vdc Operating temperature range: -40 to +85°C Dimensions: 30 x 51mm iDigi platform provides cost-effective cloud computing for remote device management. RS Product Codes. ; 761-7361 761-7361 RCM6700 1MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7365 761-7365 RCM6710 1MB Flash memory, RJ45 Ethernet socket fitted. ; 761-7374 761-7374 RCM6750 4MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7377 761-7377 RCM6760 4MB Flash memory, RJ45 Ethernet socket fitted. Development Kits. ; 761-7359 761-7359 Standard Development Kit for RCM6700. ; 761-7368 761-7368 DeLuxe Development Kit for RCM6700
1 products found
JPY: 214,370
USD: 1,343.76
-
［Discontinued］Rabbit Semiconductor Rabbit 6000 Microprocessor CP 200MHz Memory Module 20-101-1319
RCM67xx MiniCore™ Industrial Embedded Device Servers. The ultra-compact MiniCore RCM67xx is ideal for today ‘s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as PWM. Furthermore, the RCM 67xx series offers a much greater feature set than comparable device servers at a lower cost. The programming environment, Dynamic C, is an ANSI C compatible development environment that provides a royalty free TCP/IP stack and WiFi support. Various protocols such as ZigBee, Modbus and BACnet are also supported to help reduce development costs and time-to-market. In addition to processor and protocol support, Dynamic C supports the iDigi® platform which provides remote firmware updates and data storage for greater device control and monitoring. Rabbit 6000 microprocessor running at up to 200MHz 1MB of internal SRAM for program/data storage Up to 4MB of serial Flash memory for data logging or web page storage 32KB battery-backable SRAM 10/100 Ethernet LAN supported Pin-compatible with MiniCore IEEE 802.11b/g wireless modules Flexible Interface Module (FIM) provides protocol support for CAN bus or SD/SDIO 52-pin Mini PCIe edge connector Power supply: +3.3Vdc Operating temperature range: -40 to +85°C Dimensions: 30 x 51mm iDigi platform provides cost-effective cloud computing for remote device management. RS Product Codes. ; 761-7361 761-7361 RCM6700 1MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7365 761-7365 RCM6710 1MB Flash memory, RJ45 Ethernet socket fitted. ; 761-7374 761-7374 RCM6750 4MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7377 761-7377 RCM6760 4MB Flash memory, RJ45 Ethernet socket fitted. Development Kits. ; 761-7359 761-7359 Standard Development Kit for RCM6700. ; 761-7368 761-7368 DeLuxe Development Kit for RCM6700
1 products found
JPY: 291,000
USD: 1,824.11
-
［Discontinued］Rabbit Semiconductor Rabbit 6000 Microprocessor CP 200MHz Memory Module 20-101-1321
RCM67xx MiniCore™ Industrial Embedded Device Servers. The ultra-compact MiniCore RCM67xx is ideal for today ‘s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as PWM. Furthermore, the RCM 67xx series offers a much greater feature set than comparable device servers at a lower cost. The programming environment, Dynamic C, is an ANSI C compatible development environment that provides a royalty free TCP/IP stack and WiFi support. Various protocols such as ZigBee, Modbus and BACnet are also supported to help reduce development costs and time-to-market. In addition to processor and protocol support, Dynamic C supports the iDigi® platform which provides remote firmware updates and data storage for greater device control and monitoring. Rabbit 6000 microprocessor running at up to 200MHz 1MB of internal SRAM for program/data storage Up to 4MB of serial Flash memory for data logging or web page storage 32KB battery-backable SRAM 10/100 Ethernet LAN supported Pin-compatible with MiniCore IEEE 802.11b/g wireless modules Flexible Interface Module (FIM) provides protocol support for CAN bus or SD/SDIO 52-pin Mini PCIe edge connector Power supply: +3.3Vdc Operating temperature range: -40 to +85°C Dimensions: 30 x 51mm iDigi platform provides cost-effective cloud computing for remote device management. RS Product Codes. ; 761-7361 761-7361 RCM6700 1MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7365 761-7365 RCM6710 1MB Flash memory, RJ45 Ethernet socket fitted. ; 761-7374 761-7374 RCM6750 4MB Flash memory, no RJ45 Ethernet socket fitted. ; 761-7377 761-7377 RCM6760 4MB Flash memory, RJ45 Ethernet socket fitted. Development Kits. ; 761-7359 761-7359 Standard Development Kit for RCM6700. ; 761-7368 761-7368 DeLuxe Development Kit for RCM6700
1 products found
JPY: 261,000
USD: 1,636.06
-
［Discontinued］Rabbit Semiconductor Rabbit CP 22MHz Core Module, 4.75 → 5.25V 20-101-1329
RCM37xx RabbitCore® Industrial Single-Board Controller. The RCM 37 xx RabbitCore processor modules offer the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The modules support RabbitWeb for creating dynamic HTML interfaces and AES-128 encryption for secure web transactions. 22MHz Rabbit 3000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board up to 512KB data SRAM (battery-backable). On-board 1MB serial Flash memory for mass storage. Watchdog supervisor. 10Base-T Ethernet connectivity via RJ45 socket. 33 x GPIO ports. Up to 4 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. Battery-backable Real-Time Clock (RTC). Connectors: 40-pin signal header, 10-pin programming header. Power supply: +5Vdc @ 100mA. Operating temperature range: -40 to +70°C. Dimensions: 75 x 30 x 23mm. RS Product Codes. ; 761-7371 761-7371 RCM3700 with 512KB SRAM. ; 761-7380 761-7380 RCM3720 with 256KB SRAM
1 products found
JPY: 208,000
USD: 1,303.83
-
［Discontinued］Rabbit Semiconductor Rabbit CP 22MHz Core Module, 4.75 → 5.25V 20-101-1305
RCM37xx RabbitCore® Industrial Single-Board Controller. The RCM 37 xx RabbitCore processor modules offer the features and performance for embedded control systems, providing secure data communication with integrated Ethernet connectivity. The Dynamic C Integrated Development Environment (IDE) includes a full-featured C compiler, editor and in-circuit debugger. The modules support RabbitWeb for creating dynamic HTML interfaces and AES-128 encryption for secure web transactions. 22MHz Rabbit 3000 MPU. Spectrum spreader for reduced EMI (radiated emissions). On-board 512KB program Flash memory. On-board up to 512KB data SRAM (battery-backable). On-board 1MB serial Flash memory for mass storage. Watchdog supervisor. 10Base-T Ethernet connectivity via RJ45 socket. 33 x GPIO ports. Up to 4 x serial ports. 4 x PWM outputs. 2 x Quadrature Encoder inputs. Battery-backable Real-Time Clock (RTC). Connectors: 40-pin signal header, 10-pin programming header. Power supply: +5Vdc @ 100mA. Operating temperature range: -40 to +70°C. Dimensions: 75 x 30 x 23mm. RS Product Codes. ; 761-7371 761-7371 RCM3700 with 512KB SRAM. ; 761-7380 761-7380 RCM3720 with 256KB SRAM
1 products found
JPY: 218,000
USD: 1,366.51
