[Geckodrive] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Geckodrive G320X Stepper Motor Controller 20 A, 5V dc, 63.5 x 63.5 x 21mm G320X
G320 Series
G320 digital servo drive series for business use. This product is highly rated because it is reliable and can be used in a variety of applications in any environment. All models boast high reliability and excellent quality.1 products found
JPY: 82,100
USD: 510.83
-
Geckodrive G214 Stepper Motor Controller 7 A G214
G214 Series
G214 stepper drive series for commercial use. The G214 Step Motor Drive is a powerful yet cost-effective FPGA designed for high-power applications. This step motor drive is designed to eliminate resonance and is a step up from the competition. This resonance compensation ensures smooth operation of the step motor and minimal vibration. The G214 can also drive stepper motors from NEMA 8 to NEMA 42. All models boast high reliability and excellent quality.1 products found
JPY: 115,000
USD: 715.53
-
Geckodrive G203V Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 0.83 x 2.58in G203V
G203V - Stepper Drive. The G203V is the new generation CPLD-based microstep drive. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection, over-temperature protection, reversed power supply polarity protection and will survive accidental motor disconnects while powered-up. The V in G203V stands for Vampire as it is an unkillable drive. The G203V uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all. STEP, DIRECTION and DISABLE inputs are opto-isolated These inputs are +2.5/3.3/5 VDC compatible Direction is clocked in on the active step pulse edge Needs heatsinking for current settings greater than 3 amps LED-status indicators Power supply voltage between 15 and 80 VDC
1 products found
JPY: 88,600
USD: 551.27
-
Geckodrive G901X Stepper Motor Controller, 0.835 x 0.850in G901X
G901X - Step Pulse Multiplier. The G901X is a step pulse multiplier for G201X (Stock-no. 793-4127) and G203V (Stock-no. 793-4121) Digital Stepper Drives. Allows base drive to run in full step, half step, 5μStep or 10μStep modes. Jumper for setting the mode
1 products found
JPY: 12,500
USD: 77.78
-
Geckodrive GM215 Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 2.5 x 0.85in GM215
GM215 - Multi-mode Step Motor Controller. The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the smoothest possible operation of your stepper motor. Midband resonance compensation Motor smoothness, ARC Damping and VCO trim pots Terminal block 12-position 5mm Full motion controller with non-volatile memory Capable of running as a standalone solution Hard anodized electrically isolated heatsink Maximum power dissipation of 13W Recommended for NEMA 17-42 size motors DIP switch settable current and option adjust
1 products found
JPY: 96,400
USD: 599.80
-
Geckodrive G250X Stepper Motor Controller 3.5 A, 15 → 50V dc, 42.55 x 33.66 x 12.7mm G250X
G250X - Step Motor Drive. The G250 is a high-quality step motor drive, build on a circuit board with 2x15 2.54mm header for the connection. Stepper Motor Drive Input frequency till 250kHz Temperature range 0 to 70 °C Also available is a Screw and Heatsink Kit , stock no. ; 896-8557 896-8557
1 products found
JPY: 33,300
USD: 207.19
-
Geckodrive G540 Stepper Motor Controller 3.5 A, 18 → 50V dc, 161.8 x 60.2 x 31.75mm G540
The 4-axix drive contains the G250 stepper drive boards, stock no. ; 896-8553 896-8553. G540 - Step Motor Drive 4-Axis. The G540 is a complete 4-axis system which plugs directly into a computer via the parallel port and to stepper motors through DB9 connectors. It contains four G250 drives, a breakout board and a hard anodized aluminum case. Stepper Motor Drive with 4-axis Input frequency till 200kHz Temperature range 0 to 70 °C
1 products found
JPY: 199,000
USD: 1,238.18
-
Geckodrive G250 Heatsink + Screws Stepper Motor Controller G250 Heatsink + Screws
G250 X-Step Motor Drive The G250 is a high-quality step motor drive. It is built on a board with a 2 x 15 2.54 mm connection header.
Stepper Motor Drive Input Frequency: 250 kHz Maximum Operating Temperature Range: 0 → 70 °C "Screw/Heat Sink Kit" also available: Part No.; 896-8557 896-85571 products found
JPY: 4,770
USD: 29.68
