[Pactec] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
［Discontinued］Pactec KEU, Sloped Front, ABS, 127 x 138.47 x 38.18mm Desktop Enclosure, White 73701-510-039
Sloped Mini Console Cases. 2-part cases designed to fit into each other with cable entry via a rear panel Upper face raised up by about 1mm for keyboard insertion purposes Applications: include access control, control desk, etc. Add 5 mm for maximum height including feet
1 products found
JPY: 1,190
USD: 7.46
-
［Discontinued］Pactec KEU, Sloped Front, ABS, 127 x 177.8 x 33.15mm Desktop Enclosure, White 72561-510-039
Sloped Mini Console Cases. 2-part cases designed to fit into each other with cable entry via a rear panel Upper face raised up by about 1mm for keyboard insertion purposes Applications: include access control, control desk, etc. Add 5 mm for maximum height including feet
1 products found
JPY: 3,940
USD: 24.70
-
［Discontinued］Pactec KEU, Sloped Front, ABS, 203.2 x 254.01 x 50.17mm Desktop Enclosure, White 72557-510-039
Sloped Mini Console Cases. 2-part cases designed to fit into each other with cable entry via a rear panel Upper face raised up by about 1mm for keyboard insertion purposes Applications: include access control, control desk, etc. Add 5 mm for maximum height including feet
1 products found
JPY: 2,280
USD: 14.29
-
［Discontinued］ABS Project Box, Black, 128 x 129 x 38mm 71886-510-000
Computer Peripheral/Networking Enclosures. Low-profile, suitable for a variety of computer peripheral, network and electronic products Applications include LAN hubs, routers, extenders and communication modems Each enclosure top and bottom has 4 mounting bosses to accommodate a horizontal PC board Enclosure material ABS
1 products found
JPY: 2,250
USD: 14.10
-
［Discontinued］ABS Project Box, Black, 105 x 154 x 38mm 71894-510-000
Computer Peripheral/Networking Enclosures. Low-profile, suitable for a variety of computer peripheral, network and electronic products Applications include LAN hubs, routers, extenders and communication modems Each enclosure top and bottom has 4 mounting bosses to accommodate a horizontal PC board Enclosure material ABS
1 products found
JPY: 2,320
USD: 14.54
-
［Discontinued］ABS Project Box, Black, 105 x 205 x 38mm 71902-510-000
Computer Peripheral/Networking Enclosures. Low-profile, suitable for a variety of computer peripheral, network and electronic products Applications include LAN hubs, routers, extenders and communication modems Each enclosure top and bottom has 4 mounting bosses to accommodate a horizontal PC board Enclosure material ABS
1 products found
JPY: 3,040
USD: 19.06
-
［Discontinued］ABS Enclosure, White, 78 x 114 x 30mm 75053-510-039
Computer Peripheral/Networking Enclosures. Low-profile, suitable for a variety of computer peripheral, network and electronic products Applications include LAN hubs, routers, extenders and communication modems Each enclosure top and bottom has 4 mounting bosses to accommodate a horizontal PC board Enclosure material ABS
1 products found
JPY: 1,050
USD: 6.58
-
［Discontinued］Pactec A-Series Male PCB Mounting Enclosure, 1 Row 72868-510-000
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 310
USD: 1.94
-
［Discontinued］Pactec RCP Male PCB Mounting Enclosure, 1 Row 73395-510-039
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 680
USD: 4.26
-
［Discontinued］Pactec CN Male PCB Mounting Enclosure, 1 Row 73093-510-000
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 350
USD: 2.19
-
［Discontinued］Pactec CN Male PCB Mounting Enclosure, 1 Row 73095-510-000
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 380
USD: 2.38
-
［Discontinued］Pactec CN Male PCB Mounting Enclosure, 1 Row 73107-510-039
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 590
USD: 3.70
-
［Discontinued］Pactec CN Male PCB Mounting Enclosure, 1 Row 73107-510-000
The abbreviation (CA) refers to Cable Attachment and (CC) refers to Captive Connector, which requires a PCB mounted connector. There is no back/side support for the connector, only a front retainer, so there has to be 88mm between the front of the connector flange and the back of the PCB to stop it sliding back, and it needs to be 35mm wide to locate it laterally. ABS Connector Cases. Interface cases with snap-fixing covers with moulded in connector openings. Supplied with applicable mounting hardware. PCB mounting types require custom made PCBs to mount the RJ11/45 or 90° connectors Solder bucket types can be used directly with standard D connectors Internal PCB board area
1 products found
JPY: 590
USD: 3.70
-
［Discontinued］Pactec ABS Enclosure, Flanged, 143.76 x 65.53 x 37.08mm FLXT-4624-000
Two Part ABS. Features and Benefits. ABS UL94V-0 boxes moulded in 2 parts Grooves to place cards vertically or horizontally
1 products found
JPY: 1,240
USD: 7.77
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,111.8 mm x 23.6 mm x 64.8 mm 74802-510-000
Case with battery compartments is supplied with battery mounting hardware. Remote Control, Straight Panel. Top and bottom removable cover, and separate front panel Ruby Infrared lens for remote control applications Available with or without battery compartment
1 products found
JPY: 840
USD: 5.27
-
［Discontinued］Plastic Project Box, Black, 101.09 x 60.96 x 25.4mm JM-42-000
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 880
USD: 5.52
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,61.9 mm x 20.3 mm x 41.7 mm JM-12IE-000
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 790
USD: 4.95
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,96.5 mm x 25.4 mm x 61 mm JM - 24
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 800
USD: 5.02
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,61 mm x 25.4 mm x 57.7 mm JM-22-039
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 580
USD: 3.64
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,101.1 mm x 25.4 mm x 61 mm JM-42-039
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 810
USD: 5.08
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,96.5 mm x 22.9 mm x 60.3 mm HM-039
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 810
USD: 5.08
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,96.5 mm x 22.9 mm x 60.3 mm HM-000
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 810
USD: 5.08
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,95 mm x 35 mm x 60 mm HM-ET-039
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 940
USD: 5.89
-
［Discontinued］Pactec, ABS, Handheld Enclosure ,95 mm x 35 mm x 60 mm HM-ET-000
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 1,380
USD: 8.65
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,190.5 mm x 28.9 mm x 101.6 mm HPL-039
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 1,500
USD: 9.40
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,190.5 mm x 28.9 mm x 101.6 mm HPL-000
Enclosure. A series of enclosures made from ABS with a structured surface that is ideally suited for accommodating portable instruments, displays, receivers etc. Sizes 3, 4, 5 and 8 have 2 removable front plates. Sizes 6, 9, 10 and 11 have 1 removable front plate. Sizes 1, 2, 7 and 12 are enclosed half-shells; 7 and 12 also have a recessed surface, e.g. for inserting membrane keyboards. All enclosures are easy to machine and drill in order to accommodate installations or to mount components.
1 products found
JPY: 1,500
USD: 9.40
-
［Discontinued］ABS Project Box, White, 180 x 80 x 30mm TS-039
"Hand-held" housing TT/TS. Both of these extremely robust housings made from impact-resistant ABS plastic, are especially suitable as "hand-helds" for metrology or mobile data collection due to their ergonomic design. The structured surface minimises signs of usage. The upper and lower shells are provided with a closed circumferential tapered tongue and groove system. This provides high resistance to external influences. The recessed surface in the hand area of the upper housing shell is ideal for the insertion of membrane keyboards. A detailed scale drawing is included. Both 2AA and 9V batteries can be inserted in the optionally available battery compartment. The battery terminals and cables are included in the delivery.
1 products found
JPY: 2,570
USD: 16.11
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,217 mm x 25.4 mm x 101.6 mm TT-9VB/2AA-039
"Hand-held" housing TT/TS. Both of these extremely robust housings made from impact-resistant ABS plastic, are especially suitable as "hand-helds" for metrology or mobile data collection due to their ergonomic design. The structured surface minimises signs of usage. The upper and lower shells are provided with a closed circumferential tapered tongue and groove system. This provides high resistance to external influences. The recessed surface in the hand area of the upper housing shell is ideal for the insertion of membrane keyboards. A detailed scale drawing is included. Both 2AA and 9V batteries can be inserted in the optionally available battery compartment. The battery terminals and cables are included in the delivery.
1 products found
JPY: 2,610
USD: 16.36
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,217 mm x 25.4 mm x 101.6 mm TT-9VB/2AA-000
"Hand-held" housing TT/TS. Both of these extremely robust housings made from impact-resistant ABS plastic, are especially suitable as "hand-helds" for metrology or mobile data collection due to their ergonomic design. The structured surface minimises signs of usage. The upper and lower shells are provided with a closed circumferential tapered tongue and groove system. This provides high resistance to external influences. The recessed surface in the hand area of the upper housing shell is ideal for the insertion of membrane keyboards. A detailed scale drawing is included. Both 2AA and 9V batteries can be inserted in the optionally available battery compartment. The battery terminals and cables are included in the delivery.
1 products found
JPY: 2,610
USD: 16.36
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,96.5 mm x 25.5 mm x 61 mm HM-9VB-000
Cases with Integral PP3 Battery Compartment. ABS cases with a textured finish and removable front cover Cases with a PP3 compartment only are supplied with a battery connector
1 products found
JPY: 990
USD: 6.21
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,90 mm x 38 mm x 60 mm HM-9VB-ET-039
Cases with Integral PP3 Battery Compartment. ABS cases with a textured finish and removable front cover Cases with a PP3 compartment only are supplied with a battery connector
1 products found
JPY: 1,620
USD: 10.16
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,90 mm x 38 mm x 60 mm HM-9VB-ET-000
Cases with Integral PP3 Battery Compartment. ABS cases with a textured finish and removable front cover Cases with a PP3 compartment only are supplied with a battery connector
1 products found
JPY: 1,070
USD: 6.71
-
［Discontinued］Pactec, ABS, Handheld Enclosure With Integral Battery Compartment ,115 mm x 38 mm x 68 mm HML-9VB-ET-039
Cases with Integral PP3 Battery Compartment. ABS cases with a textured finish and removable front cover Cases with a PP3 compartment only are supplied with a battery connector
1 products found
JPY: 1,280
USD: 8.02
-
［Discontinued］ABS Enclosure, White, 105 x 205 x 55mm 72005-510-039
Computer Peripheral/Networking Enclosures. Low-profile, suitable for a variety of computer peripheral, network and electronic products Applications include LAN hubs, routers, extenders and communication modems Each enclosure top and bottom has 4 mounting bosses to accommodate a horizontal PC board Enclosure material ABS
1 products found
JPY: 3,150
USD: 19.75
-
［Discontinued］ABS Instrument Case, Black, 107 x 155 x 56mm LH64-200-000
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 6,110
USD: 38.30
-
［Discontinued］Pactec LH34/43, , ABS, 76.19 x 114.3 x 31.75mm Desktop Enclosure, White LH34/43-100-039
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 610
USD: 3.82
-
［Discontinued］Pactec LH34/43, , ABS, 76.19 x 114.3 x 31.75mm Desktop Enclosure, Black LH34/43-100-000
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 3,910
USD: 24.51
-
［Discontinued］Pactec LH55, , ABS, 129.5 x 129.5 x 38.1mm Desktop Enclosure, White LH55-130-039
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 3,030
USD: 18.99
-
［Discontinued］Pactec LH55, , ABS, 129.5 x 129.5 x 38.1mm Desktop Enclosure, Black LH55-130-000
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 1,500
USD: 9.40
-
［Discontinued］Pactec LH55, , ABS, 129.03 x 128.78 x 57.15mm Desktop Enclosure, White LH55-200-039
ABS instrument housing. Extremely robust, clam-shell housing made from structured ABS plastic Removable front and rear plates With numerous mounting options in the upper part and base and on the side panels for board mounting Application areas: modem, hubs, computer peripherals, transmitters and receiver, etc. Supplied with mounting screws and detailed dimensional drawing Colours: - housing pc-bone (computer beige)/front and rear plate black – housing black/front and back plate black
1 products found
JPY: 1,670
USD: 10.47
