[EXACT]Power Tool Accessories & Drill Bits
Filters
-
EXACT 3 piece HSS Conical Drill Set 3mm to 30.5mm 5209
HSS Cone Cutter Set
1 products found
JPY: 19,800
USD: 124.12
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 7004
HSS Step Drills. For rapid drilling of sheet metals and plastics. For use with power drills with a 13mm chuck.
1 products found
JPY: 39,200
USD: 245.72
-
EXACT HSS 24 → 40mm Cone Cutter 5204
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 17,700
USD: 110.95
-
EXACT HSS 16 → 30.5mm Cone Cutter 5203
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 8,150
USD: 51.09
-
EXACT HSS 6 → 20mm Cone Cutter 5202
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 4,730
USD: 29.65
-
EXACT HSS 3.5 → 12.5mm Step Drill Bit, 10 Steps 5362
System Power Tool Accessories. Precision ground, HSS power tool accessories with 1/4" hexagon shanks Excellent non-slip characteristics when used in three-jaw chucks
1 products found
JPY: 8,460
USD: 53.03
-
EXACT HSS 3 → 13mm Step Drill Bit, 11 Steps 5361
System Power Tool Accessories. Precision ground, HSS power tool accessories with 1/4" hexagon shanks Excellent non-slip characteristics when used in three-jaw chucks
1 products found
JPY: 8,460
USD: 53.03
-
EXACT HSS-E 2 → 20 mm 4 piece 90° Countersink Drill Bit Set 5426
HSS & TiN Coated Deburrs. Cutters with 90° angles designed for chatter-free deburring and chamfering on a variety of materials at production speeds.
1 products found
JPY: 26,300
USD: 164.86
-
HSS M3 71 mm Counterbore Drill Bit, 6mm Cutter Diameter, 5 mm Plain Shank 5841
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,310
USD: 20.75
-
EXACT HSS 6.3 → 20.5 mm 6 piece 90° Countersink Drill Bit Set 5527
Three-flute HSS Countersink Six Piece Set. 90° flutes made to DIN335C for use on most ferrous and non-ferrous materials 6, 8, 10, 12, 16, 20mm sizes in metal box
1 products found
JPY: 20,600
USD: 129.13
-
EXACT HSS 6 → 30mm Step Drill Bit 7003
Step drill with spiral flute. HSS step drill with deburring zone for a better circular cut For burr-free drilling and planing sheet metal, pipes and profiles Two-sided deburring in one move No centre-punching necessary, drill bits do not run Constant cutting angle during the whole process Suitable for construction steel, CrNi steel and non-ferrous metals up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck
1 products found
JPY: 19,500
USD: 122.23
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 5332
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 29,800
USD: 186.80
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 5331
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 43,100
USD: 270.17
-
EXACT HSS 9 → 36mm Step Drill Bit, 10 Steps, 3mm Max Drilling Thickness 5330
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 24,700
USD: 154.83
-
EXACT HSS 6 → 30mm Step Drill Bit, 13 Steps, 4mm Max Drilling Thickness 5329
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 16,700
USD: 104.68
-
EXACT HSS-E 84 mm 90° Countersink Drill Bit, 28mm Head Diameter 5424
Cross-hole countersink 90°. HSS-E cross-hole countersink with cylinder shaft Primarily for deburring Particularly suitable for high tension materials
1 products found
JPY: 11,000
USD: 68.95
-
EXACT HSS M3 → M10 Counterbore Set 5863
HSS Counterbores Set. Plain shank counterbores made to BS328 Part 5, ISO and DIN373 standards Storage box. Set Contents M3, M4, M5, M6, M8, and M10 (Counterbores also available individually)
1 products found
JPY: 29,900
USD: 187.43
-
HSS M10 100 mm Counterbore Drill Bit, 18mm Cutter Diameter, 12.5 mm Plain Shank 5846
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 6,530
USD: 40.93
-
HSS M8 100 mm Counterbore Drill Bit, 15mm Cutter Diameter, 12.5 mm Plain Shank 5845
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 6,140
USD: 38.49
-
HSS M6 80 mm Counterbore Drill Bit, 11mm Cutter Diameter, 8 mm Plain Shank 5844
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,390
USD: 21.25
-
HSS M5 80 mm Counterbore Drill Bit, 10mm Cutter Diameter, 8 mm Plain Shank 5843
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,190
USD: 20.00
-
HSS M4 71 mm Counterbore Drill Bit, 8mm Cutter Diameter, 5 mm Plain Shank 5842
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 2,890
USD: 18.12
-
EXACT HSS 4 → 20mm Step Drill Bit, 9 Steps, 4mm Max Drilling Thickness 5328
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 11,600
USD: 72.71
-
EXACT HSS 6 → 36mm Step Drill Bit 7005
HSS Step Drills, De-burring. Multi-diameter cutters requiring no pilot hole to cut stainless steel, carbon steel, soft metals, plastic etc 3-flute cutting action provides accurate parallel holes in sheet material up to 3mm thick 3 mm increments
1 products found
JPY: 28,800
USD: 180.53
-
EXACT HSS 67 mm 90° Countersink Drill Bit, 25mm Head Diameter, 3 Flutes 5522
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 6,130
USD: 38.43
-
EXACT HSS 5 → 20mm Cone Cutter, 20mm Max Drilling Thickness 5285
Not suitable for aluminium. Use without cooling agents. Set, stock no. < 499-302') 499-302/ contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm. Sheet metal hole cutter, spiral tap, TiAlN. HSS hole cutter with spiral tap TiAlN coating, for particularly tough materials For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick Crosswise grinding means no centre-punching necessary, drill bits do not run Diameter guide lasered into the tap, legible even when rotating Three-faced driving shaft, prevents slipping in the drill chuck
1 products found
JPY: 15,600
USD: 97.79
-
EXACT HSS 5 → 31mm Cone Cutter, 31mm Max Drilling Thickness 5286
Not suitable for aluminium. Use without cooling agents. Set, stock no. < 499-302') 499-302/ contains 1 x 4 → 20 mm hole cutter and 1 x 5 → 31 mm. Sheet metal hole cutter, spiral tap, TiAlN. HSS hole cutter with spiral tap TiAlN coating, for particularly tough materials For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs Suitable for construction steel, CrNi steel, non-ferrous metals, plastic, plexi glass and wood up to 5 mm thick Crosswise grinding means no centre-punching necessary, drill bits do not run Diameter guide lasered into the tap, legible even when rotating Three-faced driving shaft, prevents slipping in the drill chuck
1 products found
JPY: 29,100
USD: 182.41
-
EXACT HSS 6.3 → 20.5 mm 9 piece 90° Countersink Drill Bit Set 05649
DIN 335C. 90° bits, triple blade. HSS bits with three blades and 1/4" hex shaft Place directly into driver/drills, no risk of slipping through Radial rear vent for vibration-free work For deburring, threading and weighting as per DIN 74 For metal and woodwork
1 products found
JPY: 25,500
USD: 159.85
-
EXACT HSS 3 → 14mm Cone Cutter 05201
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 3,830
USD: 24.01
-
EXACT HSS 45 mm 90° Countersink Drill Bit, 6.3mm Head Diameter, 3 Flutes 05506
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 1,980
USD: 12.41
-
EXACT HSS 63 mm 90° Countersink Drill Bit, 20.5mm Head Diameter, 3 Flutes 05520
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 4,620
USD: 28.96
-
EXACT HSS 60 mm 90° Countersink Drill Bit, 16.5mm Head Diameter, 3 Flutes 05518
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 3,320
USD: 20.81
-
EXACT HSS 56 mm 90° Countersink Drill Bit, 12.4mm Head Diameter, 3 Flutes 05515
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 2,750
USD: 17.24
-
EXACT HSS 50 mm 90° Countersink Drill Bit, 10.4mm Head Diameter, 3 Flutes 05513
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 2,600
USD: 16.30
-
EXACT HSS 50 mm 90° Countersink Drill Bit, 8.3mm Head Diameter, 3 Flutes 05510
Three & Five-Flute HSS Countersinks. 90° flutes for use with machines and portable tools Three-flute designed to reduce clogging, improve clearance and be chatter free Three-flute for use on metals only Five-flute for use on metal and wood
1 products found
JPY: 2,170
USD: 13.60
-
EXACT HSS 7 → 30.5mm Step Drill Bit, 11 Steps, 6mm Max Drilling Thickness 05310
DIN 335C. Step Drill for Cable Glands. Combined HSS step drill for making core and through holes for cable glands With spiral groove and deburring zone No centre-punching necessary, drill bits do not run Better flowing and paring cut through spiral groove Constant cutting angle during the whole process Suitable for construction steel, CrNi steel and non-ferrous metals up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck
1 products found
JPY: 20,200
USD: 126.62
-
EXACT HSS-E 65 mm 90° Countersink Drill Bit, 21mm Head Diameter 05423
HSS & TiN Coated Deburrs. Cutters with 90° angles designed for chatter-free deburring and chamfering on a variety of materials at production speeds.
1 products found
JPY: 5,370
USD: 33.66
-
EXACT HSS-E 48 mm 90° Countersink Drill Bit, 14mm Head Diameter 05422
HSS & TiN Coated Deburrs. Cutters with 90° angles designed for chatter-free deburring and chamfering on a variety of materials at production speeds.
1 products found
JPY: 3,190
USD: 20.00
-
EXACT HSS-E 45 mm 90° Countersink Drill Bit, 10mm Head Diameter 05421
HSS & TiN Coated Deburrs. Cutters with 90° angles designed for chatter-free deburring and chamfering on a variety of materials at production speeds.
1 products found
JPY: 2,600
USD: 16.30
-
EXACT HSS 31 mm 90° Countersink Drill Bit, 8.3mm Head Diameter, 3 Flutes 05642
System Power Tool Accessories. Precision ground, HSS power tool accessories with 1/4" hexagon shanks Excellent non-slip characteristics when used in three-jaw chucks
1 products found
JPY: 2,330
USD: 14.61
