[EXACT]Threading Tools
Filters
-
EXACT 2 Piece 3/8 in UNF HSS Hand Tap Set 1539
UNF-Thread Tap Set. One taper tap (with a 4° chamfer) and one plug tap (with 23° chamfer) per set Supplied in polypropylene tubes
1 products found
JPY: 6,460
USD: 40.52
-
EXACT 30mm diameter Steel Die Holder, 280 mm 4935
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 1,340
USD: 8.41
-
EXACT 7 Piece M10 HSS Combi Tap Set 5910
7 Piece Combination Tap and Drill Tool Kit. HSS combination tap and drill bit tool kits. For drilling core holes, tapping and deburring in a single pass. Suitable for construction steel, CrNi steel, non-ferrous metals and plastics. 7-Piece Kit. M3, M4, M5, M6, M8, M10 1/4-in. Receptacle Adapter Type: 05910
1 products found
JPY: 15,500
USD: 97.23
-
EXACT 25mm diameter Steel Die Holder, 224 mm 4934
Die Stock. Die stock for the fitting and turning of dies when cutting or repairing threads. Chemically blackened finish. Chromed handles
1 products found
JPY: 970
USD: 6.09
-
EXACT 20mm diameter Steel Die Holder, 200 mm 4933
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 920
USD: 5.77
-
EXACT 38mm diameter Steel Die Holder, 315 mm 4937
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 1,790
USD: 11.23
-
EXACT HSS M12 Thread Tap, 51 mm Length 5971
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 4,140
USD: 25.97
-
EXACT HSS M4 Combination Thread Tap, 39 mm Length 5902
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 3,270
USD: 20.51
-
EXACT HSS M25 Thread Tap, 51 mm Length 5974
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 12,400
USD: 77.78
-
EXACT HSS M8 Combination Thread Tap, 50 mm Length 5905
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 4,430
USD: 27.79
-
EXACT HSS M16 Thread Tap, 51 mm Length 5972
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 6,810
USD: 42.72
-
EXACT HSS M20 Thread Tap, 51 mm Length 5973
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 9,310
USD: 58.40
-
EXACT Die, 1/4-20, 20mm od 4310
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 3,330
USD: 20.89
-
EXACT HSS M5 Combination Thread Tap, 41 mm Length 5903
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 3,270
USD: 20.51
-
EXACT 2 Piece 1/2 in UNF HSS Hand Tap Set 01545
DIN 351. Manual tap sets, 2-part, UNF. HSS-G manual tap with straight flute, profile ground and relief ground Two-part sets with one taper and one plug tap in each size For UNF unified fine threads, tolerance 2B Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 9,190
USD: 57.65
-
EXACT 2 Piece 5/16 in UNF HSS Hand Tap Set 01536
UNF-Thread Tap Set. One taper tap (with a 4° chamfer) and one plug tap (with 23° chamfer) per set Supplied in polypropylene tubes
1 products found
JPY: 4,930
USD: 30.93
-
EXACT 2 Piece 1/4 in UNF HSS Hand Tap Set 01533
DIN 351. Manual tap sets, 2-part, UNF. HSS-G manual tap with straight flute, profile ground and relief ground Two-part sets with one taper and one plug tap in each size For UNF unified fine threads, tolerance 2B Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 4,470
USD: 28.04
-
EXACT 2 Piece #10 UNF HSS Hand Tap Set 01527
UNF-Thread Tap Set. One taper tap (with a 4° chamfer) and one plug tap (with 23° chamfer) per set Supplied in polypropylene tubes
1 products found
JPY: 4,560
USD: 28.60
-
EXACT 38mm diameter Steel Die Holder, 315 mm 04936
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 1,790
USD: 11.23
-
EXACT HSS M32 Thread Tap, 51 mm Length 05975
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 20,700
USD: 129.85
-
EXACT HSS M3 Combination Thread Tap, 36 mm Length 05901
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 3,270
USD: 20.51
-
EXACT HSS M10 Combination Thread Tap, 59 mm Length 05906
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 5,400
USD: 33.87
-
EXACT HSS M6 Combination Thread Tap, 44 mm Length 05904
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 3,270
USD: 20.51
-
EXACT HSS Tap & Drill Set 05979
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 81,600
USD: 511.86
-
EXACT 6 Piece M12 HSSG-E Machine tap Set 03448
Metric Drill/Tap Combinations. Taps incorporating a pilot drill ground on the same shank Suitable for use with reversible, variable speed power tools.
1 products found
JPY: 43,200
USD: 270.98
-
EXACT Die, 7/16-20, 30mm od 04414
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 4,720
USD: 29.61
-
EXACT Die, 1/2-20 UNF, 38mm od 04415
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 5,280
USD: 33.12
-
EXACT Die, 5/16-24, 25mm od 04412
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 3,740
USD: 23.46
-
EXACT Die, 5/16-18, 25mm od 04311
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 3,740
USD: 23.46
-
EXACT Die, 1/2-13, 38mm od 04314
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 5,280
USD: 33.12
-
EXACT Die, 3/8-24, 30mm od 04413
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 4,120
USD: 25.84
-
EXACT Die, 1/4-28, 20mm od 04411
HSS; DIN/UNF/UNC Dies. Professional range of HSS dies to DIN specifications, available in a wide range of sizes.
1 products found
JPY: 3,330
USD: 20.89
