[Epic Contact] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Epic Contact Extraction Tool for EPIC Series Pin Contact, Contact size 1.5 → 2.5mm² 11171100
VDE; CSA; UL; SEV. Crimp Tooling. For MC-Modular contacts excluding 10A Crimp tool and positioner for the 10A contacts see stock numbers ; 266-6860 266-6860 and ; 266-6882 266-6882
1 products found
JPY: 41,800
USD: 262.02
-
Epic Contact Crimping Tool 11147000
VDE0110/72, 0110b, 79, VDE0627/86 • Do not install or remove the connector under an electrical load. Side-by-side connectors of the same or different series can be used with coding options to prevent accidental engagement.
SEV, UL, CSA1 products found
JPY: 89,000
USD: 557.89
-
H-A Series Connector Hood 0104220
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. H-D 7 and 8 Way Inserts. Crimp termination Uses type HA3 hood ; 284-6757 284-6757 or similar
1 products found
JPY: 1,280
USD: 8.02
-
Epic Contact Crimp Extraction Tool for MC 2.5 Series Pin Contact 11171000
VDE; CSA; UL; SEV. Crimp Tooling. For MC-Modular contacts excluding 10A Crimp tool and positioner for the 10A contacts see stock numbers ; 266-6860 266-6860 and ; 266-6882 266-6882
1 products found
JPY: 41,800
USD: 262.02
-
Epic Contact Crimp Die Set, Machined Contact, Wire size 0.14 → 2.5 mm² 11147100
UL listed, CSA certified, SEV. Plug and Socket Inserts Crimp Termination. Contacts and Tooling. Group C rated Wire acceptance 0.75 to 1.5mm ;sup>2 ;/sup> Plug insert accepts pin contacts, socket insert accepts socket contacts Contacts and tooling available separately
1 products found
JPY: 129,000
USD: 808.63
-
H-D Series Male Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1626
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 7,690
USD: 48.20
-
H-D Series Female Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1636
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 7,910
USD: 49.58
-
H-D Series Male Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1627
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 7,300
USD: 45.76
-
H-D Series Male Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13162800
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 7,300
USD: 45.76
-
H-D Series Female Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1638
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 7,900
USD: 49.52
-
H-D Series Female Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13163700
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 9,020
USD: 56.54
-
［Discontinued］Epic Contact Crimp Extraction Tool for MC 2.5 Series Pin Contact 11161000
VDE; CSA; UL; SEV. Crimp Tooling. For MC-Modular contacts excluding 10A Crimp tool and positioner for the 10A contacts see stock numbers ; 266-6860 266-6860 and ; 266-6882 266-6882
1 products found
JPY: 9,610
USD: 60.24
-
［Discontinued］H-A Series 4 Way Male 10A Connector Kit 10426700+10431000
H-A Cable Plugs - Heavy Duty Connectors. From Contact Connector, these pre-assembled EPIC H-A series connectors are highly safe, reliable and suitable for high voltage applications.
1 products found
JPY: 3,320
USD: 20.81
-
［Discontinued］Epic Contact Crimp Die Set, Stamped Contact, Wire size 0.5 → 1.5 mm² 11.14718
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. H-D Plug and Socket Inserts Crimp Termination. Formed Contacts and Tooling. Stamped and formed contacts Tooling available
1 products found
JPY: 27,100
USD: 169.87
-
［Discontinued］H-D Series Male Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1629
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 1,510
USD: 9.47
-
［Discontinued］H-D Series Female Contact, Rated At 10A, 250 V ac, For Use With Heavy Duty Power Connectors 13.1639
VDE 0110//72, 0110b, 79, VDE 0627//86. Connectors should not be coupled and decoupled under electrical load. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. SEV, UL, CSA. Alternative crimp tool see stock no. 266-6860. The posistioner used with this alternative crimp tool is listed in the table (stock no. 266-6882). Crimp Contacts, H-D and H-DD and Tooling. Machined precious-metal plated copper alloy crimp contacts snap into plug and socket inserts.Wire acceptance 0.5 to 2.5mm²
1 products found
JPY: 1,500
USD: 9.40
-
［Discontinued］MCS Series 20 Way Male 4A MC Module Kit, includes Contact, Module 10383600 + 44429014
MC 20 Pole Module. Crimp termination 20 x M-D 1.0 stamped contacts included 100V - 4A
1 products found
JPY: 880
USD: 5.52
