[Unistrut] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Steel Pipe Clamp 23mm 14mm 21.4 → 25.4mm M 1116
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 10,600
USD: 65.95
-
Steel Pipe Clamp 28.5mm 14mm 27 → 30.2mm M 1118
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 11,200
USD: 69.69
-
Unistrut Pipe Clips PCH14-18, 14 → 15mm PCH14-18
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 5,240
USD: 32.60
-
Unistrut Pipe Clips PCH-2022, 20 → 22mm PCH-2022
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 6,360
USD: 39.57
-
Unistrut Pipe Clips PCH-3335, 33 → 35mm PCH-3335
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 7,200
USD: 44.80
-
Unistrut Pipe Clips PCH-4244, 42 → 44mm PCH-4244
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 8,000
USD: 49.78
-
Unistrut Pipe Clips PCH-4850, 48 → 50mm PCH-4850
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 8,090
USD: 50.34
-
Unistrut Pipe Clips PCH-5254, 52 → 54mm PCH-5254
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 8,700
USD: 54.13
-
Unistrut Pipe Clips PCH-6064, 60 → 64mm PCH-6064
Suspension boss has both M8 & M10 threads. EPDM-Lined Clip-type Pipe Hangers. These can be used for securing pipes, hoses and cables and are excellent for securing brake pipes, fuel lines and wiring amongst others. The EPDM lining enables a good firm fit that minimises the possibility of chafing or damage to a surface. The rubber lined clip also absorbs vibration and helps with any size changes due to different temperatures internally and externally. Sizes in range from 20 to 64 mm Double threaded boss
1 products found
JPY: 12,300
USD: 76.53
-
Steel Pipe Clamp 20mm 14mm 19 → 21.4mm M 1115
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 9,400
USD: 58.49
-
Steel Pipe Clamp 34mm 14mm 31.8 → 35.9mm M1120
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 12,500
USD: 77.78
-
Steel Pipe Clamp 41mm 14mm 39.7 → 42.9mm M1122
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 12,100
USD: 75.29
-
Steel Pipe Clamp 48mm 14mm 46.8 → 50.8mm M1124
2-piece Pipe Clamp. Galvanised steel 2-piece pipe clamps,(Screw and nut supplied).
1 products found
JPY: 22,100
USD: 137.51
-
Steel Pipe Clamp 15mm 14mm 15 → 21mm SS 2 A
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 9,500
USD: 59.11
-
Steel Pipe Clamp 25mm 14mm 25 → 34mm SS 2 C
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 9,610
USD: 59.79
-
Steel Pipe Clamp 40mm 14mm 40 → 48mm SS 2 E
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 11,400
USD: 70.93
-
Steel Pipe Clamp 50mm 14mm 50 → 60mm SS 2 F
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 13,700
USD: 85.24
-
Steel Pipe Clamp 80mm 14mm 80 → 90mm SS 2 H
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 18,600
USD: 115.73
-
Steel Pipe Clamp 100mm 14mm 100 → 115mm SS 2 K
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 21,700
USD: 135.02
-
Steel Pipe Clamp 150mm 14mm 150 → 168mm SS 2 M
1-piece Pipe Clamp. Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing
1 products found
JPY: 33,100
USD: 205.95
-
Unistrut Channel Nut, M6 x 41 mm, Nut Base Dimensions 45 x 34mm, Zinc Plated Steel, 0.04g 15802R
Kwikstrut QCN Channels Nuts. Channel nut with plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 6,860
USD: 42.68
-
Unistrut Channel Nut, M8 x 41 mm, Nut Base Dimensions 45 x 34mm, Zinc Plated Steel, 0.03g 15803Y
Kwikstrut QCN Channels Nuts. Channel nut with plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 7,710
USD: 47.97
-
Unistrut Channel Nut, M12 x 41 mm, Nut Base Dimensions 45 x 34mm, Zinc Plated Steel, 0.03g 15805Q
Kwikstrut QCN Channels Nuts. Channel nut with plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 8,300
USD: 51.64
-
Unistrut Channel Nut, M8 x 41 mm, Nut Base Dimensions 40 x 40mm, Zinc Plated Steel, 0.06g 15806X
Kwikstrut QRN Channel Nuts - Zinc Plated. Channel nut with washer Plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 8,300
USD: 51.64
-
Unistrut Channel Nut, M10 x 41 mm, Nut Base Dimensions 45 x 34mm, Zinc Plated Steel, 0.03g 15804U
Kwikstrut QCN Channels Nuts. Channel nut with plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 7,950
USD: 49.47
-
Unistrut Channel Nut, M10 x 41 mm, Nut Base Dimensions 40 x 40mm, Zinc Plated Steel, 0.058g 15807T
Kwikstrut QRN Channel Nuts - Zinc Plated. Channel nut with washer Plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 8,300
USD: 51.64
-
Unistrut Channel Nut, M12 x 41 mm, Nut Base Dimensions 40 x 40mm, Zinc Plated Steel, 0.055g 15808P
Kwikstrut QRN Channel Nuts - Zinc Plated. Channel nut with washer Plastic component made of polyamide (PA6) Metric thread Usable for all 41mm Unistrut channels
1 products found
JPY: 8,300
USD: 51.64
