[Intelligent Embedded Solutions] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Intelligent Embedded Solutions
［Discontinued］Intelligent Embedded Solutions IES-SHIELD-SCX18 Servo shield Stepper Shield for Arduino IES-SHIELD-SCX18
Servomotor Controller Plug-in Module (Shield) for Arduino. This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format robots. Standard Arduino UNO Shield form factor 256 steps of angular shaft position 16-level speed control for each servo Movement complete and soft-start complete status for each servomotor Global activation control ensures all servos react together Standard R/C servomotor connection headers Communication via 400kHz serial I²C bus Jumper-selectable I²C address Jumper-selectable I²C pull-ups (Not required for Raspberry Pi) Two +5V @ 3A regulators with heatsinks for motor power supply Up to four shields can be linked together via the I²C bus controlling up to 72 servomotors Screw connector for motor power supply Operating temperature range: 0 to +70°C Dimensions: 56.25 x 53.5 x 15mm. Compatible Servomotors. ; 781-3058 781-3058 Standard 180° Servomotor. ; 781-3046 781-3046 Standard Continuous-Rotation Servomotor, 50rpm. ; 790-5220 790-5220 Standard Continuous-Rotation Servomotor, 180rpm
1 products found
JPY: 12,400
USD: 77.73
-
Intelligent Embedded Solutions
［Discontinued］IES, PiFi Audio Expansion Board for Raspberry Pi - IES-PI-hIfI IES-PI-hIfI
PIFI Stereo Audio Expansion Board. The PIFI is an expansion board that adds a CD quality stereo audio to the Raspberry Pi. The PIFI has the same form factor as the Pi so you can easily mount it above the Pi using a micro USB cable and stand-off pillars without blocking the GPIO header. What can I use the PIFI for? The PIFI is ideal for projects and designs where audio playback and recording is needed. Features & Benefits of the PIFI ;3 audio outputs -headphone -Sony/Phillips Digital Interface Format (SPDIF) -6+6 Watt speaker amplifier ;On-board microphone ;External microphone connector ;2 USB ports ;Advanced Linux Sound Architecture (ALSA) driver compatible ;44/48 bit stereo record and playback
1 products found
JPY: 12,300
USD: 77.10
-
Intelligent Embedded Solutions
［Discontinued］LED Light shield, 4-channel for Arduino IES-SHIELD-RGBW
RGBW 4W 340lumen lighting module with heatsink, featuring OSRAM OSLON LEDs. The supplied LED module will require a 12V @ 500mA power supply. As the shield uses a constant-current drive, the LED power supply voltage is given by the formula V : n x 4 where n is the number of series LEDs in a channel. 4-Channel LED Lighting Shield for Arduino. This lighting shield is capable of driving four high-current channels each containing up to 12 LEDs in series. It is designed for the Arduino UNO but is compatible with all other Ardunio boards and the Raspberry Pi via the I2C interface. Suitable for a wide range of applications including room lighting, accent lighting and aquarium lighting. A built in aquarium mode simulates moonlight, daytime and night cycles using an internal 24 hour timer. Arduino UNO shield standard form factor Four LED channels each with 350mA constant-current drivers Up to 12 LEDs in series per channel Communication via 400kHz serial I2C bus Jumper-selectable I2C address Jumper-selectable I2C pull-ups (Not required for Raspberry Pi) Up to four shields can be linked together via the I²C bus Screw connector for LED power supply Operating temperature range: 0 to +70°C Dimensions: 56.25 x 53.5 x 12mm
1 products found
JPY: 16,700
USD: 104.68
