[EXAR]Amplifiers & Comparators
Filters
-
［Discontinued］CLC1003IST5X EXAR, Low Noise, Op Amp, RRIO, 35MHz, 2.5 → 12 V, 5-Pin SOT-23 CLC1003IST5X
CLC1003, CLC2023, Low Distortion, Low Offset, RRIO Amplifiers, EXAR. 1 mV max. (CLC1003) input offset voltage 6 mV max. (CLC2023) input offset voltage 0.00005% THD at 1 kHz 5.3 nV/√Hz input voltage noise -90 dB/-85 dB HD2/HD3 (100 kHz, 100 Ω)
1 products found
JPY: 510,000
USD: 3,173.22
-
［Discontinued］CLC1005IST5X EXAR, Op Amp, RRIO, 260MHz, 2.5 → 5.5 V, 5-Pin SOT-23 CLC1005IST5X
CLC1005, 260MHz Rail-to-Rail Output Amplifier, EXAR. 260 MHz bandwidth Input voltage range: -300 mV to 3.8 V (5 V) 145 V/μs slew rate
1 products found
JPY: 429,000
USD: 2,669.24
-
［Discontinued］LMV321IST5X EXAR, Low Power, Op Amp, RRO, 1MHz 1 kHz, 2.7 → 5.5 V, 5-Pin SOT-23 LMV321IST5X
LMV321, Low Power, Rail-to-Rail Output Amplifier, EXAR. 130 μA supply current 1 MHz gain bandwidth Input voltage range: -200 mV to 4.2 V (5 V) 1 V/μs slew rate
1 products found
JPY: 126,000
USD: 783.97
-
［Discontinued］CLC1005ISO8MTR EXAR, Op Amp, RRIO, 260MHz 10 MHz, 2.5 → 5.5 V, 8-Pin SOIC CLC1005ISO8MTR
CLC1005, 260MHz Rail-to-Rail Output Amplifier, EXAR. 260 MHz bandwidth Input voltage range: -300 mV to 3.8 V (5 V) 145 V/μs slew rate
1 products found
JPY: 41,000
USD: 255.10
-
［Discontinued］CLC2000ISO8MTR EXAR, Op Amp, 510MHz 5 MHz, 5 → 12 V, 8-Pin SOIC CLC2000ISO8MTR
CLC2000, CLC4000, High Output Current Amplifiers, EXAR. 510 MHz -3dB bandwidth at G:1 250 MHz -3dB bandwidth at G:2 200 mA output current 9.4 Vpp output drive into 25 Ω
1 products found
JPY: 84,700
USD: 527.00
-
［Discontinued］CLC2023IMP8MTR EXAR, Op Amp, RRIO, 35MHz 1 MHz, 2.5 → 12 V, 8-Pin MSOP CLC2023IMP8MTR
CLC1003, CLC2023, Low Distortion, Low Offset, RRIO Amplifiers, EXAR. 1 mV max. (CLC1003) input offset voltage 6 mV max. (CLC2023) input offset voltage 0.00005% THD at 1 kHz 5.3 nV/√Hz input voltage noise -90 dB/-85 dB HD2/HD3 (100 kHz, 100 Ω)
1 products found
JPY: 60,000
USD: 373.32
-
［Discontinued］XR8052AMP8MTR EXAR, Op Amp, RRO, 65MHz 5 MHz, 3 → 5 V, 8-Pin MSOP XR8052AMP8MTR
XR8051/XR8052/XR8054, High Speed Rail-to-Rail Output Amplifiers, EXAR. 175 MHz bandwidth Fully specified at +3 V, +5 V and ±5 V supply voltages Input voltage range: -300 mV to +4.1 V (+5 V) 190 V/μs slew rate
1 products found
JPY: 43,300
USD: 269.41
-
［Discontinued］XR8051ASO8MTR EXAR, Op Amp, RRO, 65MHz 5 MHz, 3 → 5 V, 8-Pin SOIC XR8051ASO8MTR
XR8051/XR8052/XR8054, High Speed Rail-to-Rail Output Amplifiers, EXAR. 175 MHz bandwidth Fully specified at +3 V, +5 V and ±5 V supply voltages Input voltage range: -300 mV to +4.1 V (+5 V) 190 V/μs slew rate
1 products found
JPY: 40,000
USD: 248.88
-
［Discontinued］XR8054ASO14MTR EXAR, Op Amp, RRO, 65MHz 5 MHz, 3 → 5 V, 14-Pin SOIC XR8054ASO14MTR
XR8051/XR8052/XR8054, High Speed Rail-to-Rail Output Amplifiers, EXAR. 175 MHz bandwidth Fully specified at +3 V, +5 V and ±5 V supply voltages Input voltage range: -300 mV to +4.1 V (+5 V) 190 V/μs slew rate
1 products found
JPY: 76,900
USD: 478.47
-
［Discontinued］CLC4011ITP14 EXAR, Op Amp, RRIO, 4.9MHz, 2.5 → 5.5 V, 14-Pin TSSOP CLC4011ITP14
CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR. This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices. Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance. The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate. Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.. Features of the CLC2011/CLC4011 COMLINEAR® amplifiers: 4.9 MHz bandwidth Output voltage: within 20 mV of either rail Input voltage: exceeds the rail by >250mV 5.3 V/μs slew rate 136μA supply current 16 mA output current Fully specified at 2.7 V and 5 V supplies CLC2011 - dual CLC4011 - quad
1 products found
JPY: 168,000
USD: 1,045.30
-
［Discontinued］CLC1003IST5X EXAR, Low Noise, Op Amp, RRIO, 35MHz, 2.5 → 12 V, 5-Pin SOT-23 CLC1003IST5X
CLC1003, CLC2023, Low Distortion, Low Offset, RRIO Amplifiers, EXAR. 1 mV max. (CLC1003) input offset voltage 6 mV max. (CLC2023) input offset voltage 0.00005% THD at 1 kHz 5.3 nV/√Hz input voltage noise -90 dB/-85 dB HD2/HD3 (100 kHz, 100 Ω)
1 products found
JPY: 2,040
USD: 12.69
-
［Discontinued］CLC2007ISO8 EXAR, Op Amp, RRIO, 95MHz, 2.7 → 12.6 V, 8-Pin SOIC CLC2007ISO8
CLC1007, CLC2007 and CLC4007 Rail-to-Rail Output Amplifiers, EXAR. This range of high speed voltage feedback amplifiers from Exar are high performance devices. Designed for use with 3 V or 5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high output current and rail-to-rail performance. The CLC1007 (single), CLC2007 (dual) and CLC4007 (quad) RRO amplifiers offer a small signal bandwidth or 260 mHz and a 220V/μs slew rate. High volume consumer and industrial applications are perfect for the CLC1007/CLC2007/CLC4007. These applications include; telephones, scanners, video transmission, active filters, A/D drivers and CCD imaging systems.. Features of the CLC1007/CLC2007/CLC4007 RRO amplifiers: 260MHz bandwidth Output voltage: 0.03V to 4.95V Input voltage: -0.3V to +4.1V 220V/μs slew rate 2.6mA supply current per amplifier ±100mA linear output current ±125mA short circuit current CLC1007 - single CLC2007 - dual CLC4007 - quad
1 products found
JPY: 12,700
USD: 79.02
-
［Discontinued］LMV321IST5X EXAR, Low Power, Op Amp, RRO, 1MHz 1 kHz, 2.7 → 5.5 V, 5-Pin SOT-23 LMV321IST5X
LMV321, Low Power, Rail-to-Rail Output Amplifier, EXAR. 130 μA supply current 1 MHz gain bandwidth Input voltage range: -200 mV to 4.2 V (5 V) 1 V/μs slew rate
1 products found
JPY: 3,040
USD: 18.92
-
［Discontinued］CLC1005ISO8MTR EXAR, Op Amp, RRIO, 260MHz 10 MHz, 2.5 → 5.5 V, 8-Pin SOIC CLC1005ISO8MTR
CLC1005, 260MHz Rail-to-Rail Output Amplifier, EXAR. 260 MHz bandwidth Input voltage range: -300 mV to 3.8 V (5 V) 145 V/μs slew rate
1 products found
JPY: 1,080
USD: 6.72
-
［Discontinued］CLC2000ISO8MTR EXAR, Op Amp, 510MHz 5 MHz, 5 → 12 V, 8-Pin SOIC CLC2000ISO8MTR
CLC2000, CLC4000, High Output Current Amplifiers, EXAR. 510 MHz -3dB bandwidth at G : 1 250 MHz -3dB bandwidth at G : 2 200 mA output current 9.4 Vpp output drive into 25 Ω
1 products found
JPY: 2,120
USD: 13.19
-
［Discontinued］CLC2023IMP8MTR EXAR, Op Amp, RRIO, 35MHz 1 MHz, 2.5 → 12 V, 8-Pin MSOP CLC2023IMP8MTR
CLC1003, CLC2023, Low Distortion, Low Offset, RRIO Amplifiers, EXAR. 1 mV max. (CLC1003) input offset voltage 6 mV max. (CLC2023) input offset voltage 0.00005% THD at 1 kHz 5.3 nV/√Hz input voltage noise -90 dB/-85 dB HD2/HD3 (100 kHz, 100 Ω)
1 products found
JPY: 1,230
USD: 7.65
-
［Discontinued］CLC2011ISO8MTR EXAR, Op Amp, RRIO, 2.5MHz 10 kHz, 2.5 → 5.5 V, 8-Pin SOIC CLC2011ISO8MTR
CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR. This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices. Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance. The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate. Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.. Features of the CLC2011/CLC4011 COMLINEAR® amplifiers: 4.9 MHz bandwidth Output voltage: within 20 mV of either rail Input voltage: exceeds the rail by >250mV 5.3 V/μs slew rate 136μA supply current 16 mA output current Fully specified at 2.7 V and 5 V supplies CLC2011 - dual CLC4011 - quad
1 products found
JPY: 1,030
USD: 6.41
-
［Discontinued］CLC4007ITP14MTR EXAR, Op Amp, RRIO, 90MHz 5 MHz, 3 → 5 V, 14-Pin TSSOP CLC4007ITP14MTR
CLC1007, CLC2007 and CLC4007 Rail-to-Rail Output Amplifiers, EXAR. This range of high speed voltage feedback amplifiers from Exar are high performance devices. Designed for use with 3 V or 5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high output current and rail-to-rail performance. The CLC1007 (single), CLC2007 (dual) and CLC4007 (quad) RRO amplifiers offer a small signal bandwidth or 260 mHz and a 220V/μs slew rate. High volume consumer and industrial applications are perfect for the CLC1007/CLC2007/CLC4007. These applications include; telephones, scanners, video transmission, active filters, A/D drivers and CCD imaging systems.. Features of the CLC1007/CLC2007/CLC4007 RRO amplifiers: 260MHz bandwidth Output voltage: 0.03V to 4.95V Input voltage: -0.3V to +4.1V 220V/μs slew rate 2.6mA supply current per amplifier ±100mA linear output current ±125mA short circuit current CLC1007 - single CLC2007 - dual CLC4007 - quad
1 products found
JPY: 520
USD: 3.24
-
［Discontinued］CLC4011ISO14MTR EXAR, Op Amp, RRIO, 2.5MHz 10 kHz, 2.5 → 5.5 V, 14-Pin SOIC CLC4011ISO14MTR
CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR. This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices. Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance. The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate. Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.. Features of the CLC2011/CLC4011 COMLINEAR® amplifiers: 4.9 MHz bandwidth Output voltage: within 20 mV of either rail Input voltage: exceeds the rail by >250mV 5.3 V/μs slew rate 136μA supply current 16 mA output current Fully specified at 2.7 V and 5 V supplies CLC2011 - dual CLC4011 - quad
1 products found
JPY: 17,700
USD: 110.13
-
［Discontinued］CLC4011ISO14MTR EXAR, Op Amp, RRIO, 2.5MHz 10 kHz, 2.5 → 5.5 V, 14-Pin SOIC CLC4011ISO14MTR
CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR. This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices. Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance. The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate. Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.. Features of the CLC2011/CLC4011 COMLINEAR® amplifiers: 4.9 MHz bandwidth Output voltage: within 20 mV of either rail Input voltage: exceeds the rail by >250mV 5.3 V/μs slew rate 136μA supply current 16 mA output current Fully specified at 2.7 V and 5 V supplies CLC2011 - dual CLC4011 - quad
1 products found
JPY: 930
USD: 5.79
-
［Discontinued］XR8051ASO8MTR EXAR, Op Amp, RRO, 65MHz 5 MHz, 3 → 5 V, 8-Pin SOIC XR8051ASO8MTR
XR8051/XR8052/XR8054, High Speed Rail-to-Rail Output Amplifiers, EXAR. 175 MHz bandwidth Fully specified at +3 V, +5 V and ±5 V supply voltages Input voltage range: -300 mV to +4.1 V (+5 V) 190 V/μs slew rate
1 products found
JPY: 960
USD: 5.97
-
［Discontinued］XR8054ASO14MTR EXAR, Op Amp, RRO, 65MHz 5 MHz, 3 → 5 V, 14-Pin SOIC XR8054ASO14MTR
XR8051/XR8052/XR8054, High Speed Rail-to-Rail Output Amplifiers, EXAR. 175 MHz bandwidth Fully specified at +3 V, +5 V and ±5 V supply voltages Input voltage range: -300 mV to +4.1 V (+5 V) 190 V/μs slew rate
1 products found
JPY: 1,840
USD: 11.45
-
［Discontinued］XR1008ISO8X EXAR, Op Amp, RRO, 33MHz, 2.5 → 5.5 V, 8-Pin SOIC XR1008ISO8X
XR1008, XR2008, 0.5mA, 75MHz Rail-to-Rail Output Amplifiers, EXAR. 505 μA supply current 75 MHz bandwidth Input voltage range: -300 mV to 3.8 V (5 V) 50 V/μs slew rate 12 nV/√Hz input voltage noise 15 mA linear output current Fully specified at 2.7 V and 5 V supply voltage
1 products found
JPY: 408,000
USD: 2,538.58
-
［Discontinued］XR1008ISO8X EXAR, Op Amp, RRO, 33MHz, 2.5 → 5.5 V, 8-Pin SOIC XR1008ISO8X
XR1008, XR2008, 0.5mA, 75MHz Rail-to-Rail Output Amplifiers, EXAR. 505 μA supply current 75 MHz bandwidth Input voltage range: -300 mV to 3.8 V (5 V) 50 V/μs slew rate 12 nV/√Hz input voltage noise 15 mA linear output current Fully specified at 2.7 V and 5 V supply voltage
1 products found
JPY: 1,240
USD: 7.72
-
［Discontinued］CLC4000ISO14 EXAR, High Current, Op Amp, 510MHz, 5 → 12 V, 14-Pin SOIC CLC4000ISO14
CLC2000, CLC4000, High Output Current Amplifiers, EXAR. 510 MHz -3dB bandwidth at G : 1 250 MHz -3dB bandwidth at G : 2 200 mA output current 9.4 Vpp output drive into 25 Ω
1 products found
JPY: 1,200
USD: 7.47
-
［Discontinued］CLC4011ITP14 EXAR, Op Amp, RRIO, 4.9MHz, 2.5 → 5.5 V, 14-Pin TSSOP CLC4011ITP14
CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR. This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices. Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance. The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate. Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.. Features of the CLC2011/CLC4011 COMLINEAR® amplifiers: 4.9 MHz bandwidth Output voltage: within 20 mV of either rail Input voltage: exceeds the rail by >250mV 5.3 V/μs slew rate 136μA supply current 16 mA output current Fully specified at 2.7 V and 5 V supplies CLC2011 - dual CLC4011 - quad
1 products found
JPY: 520
USD: 3.24
