[Werma] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Black Wall Mount Buzzer, 52 mm Diameter, 24 V ac/dc, 80dB at 1 Metre 10900075
Electronic Sounder 109. Designed for industrial use Protection to IP65 Sound output 80dB at 1m Continuous or pulsating tone types Supplied with screw terminal connector and sealing gasket Vertical wall mounting bracket available separately Housing material PC/ABS black
1 products found
JPY: 22,400
USD: 139.37
-
Black Wall Mount Buzzer, 52 mm Diameter, 24 V ac/dc, 80dB at 1 Metre 10901075
Electronic Sounder 109. Designed for industrial use Protection to IP65 Sound output 80dB at 1m Continuous or pulsating tone types Supplied with screw terminal connector and sealing gasket Vertical wall mounting bracket available separately Housing material PC/ABS black
1 products found
JPY: 22,600
USD: 140.62
-
Kompakt LED Beacon Tower, 3 Light Elements, Green, Red, Yellow, 24 V ac/dc 69831075
Kompakt 37 LED Signal Tower. The KOMPAKT 37 is a slim-line LED signal tower available in two versions, either in a black housing with coloured lens or in a metal finish with a clear lens. The coloured lens signal towers have coloured LEDs which provide maximum colour intensity, making them particularly effective in lower light environments. In bright sunlight however it can be difficult to see the difference between a coloured lens and an illuminated coloured lens. This is where the clear lens signal tower comes into its own as it is only coloured when in the ‘ON ‘ position, therefore ensuring it is not mistaken as being illuminated when it is in the ‘Off ‘ position. Thanks to a diameter of just 37.5 mm the KOMPAKT 37 is ideally suited to applications on small machines and equipment with limited space. Also available are versions with a 85dB buzzer integrated into the cap of the signal tower which provide an additional audible warning. Pre-assembled signal tower with max. 5 tiers Each light tier has 8 LEDs LED permanent light With or without buzzer With M12 plug or cable connection IP65 protection Up to 50,000 hours of life with very low power consumption Maintenance free LEDs
1 products found
JPY: 32,900
USD: 204.70
-
KombiSIGN 70 843 Beacon Unit, Orange LED, Steady Light Effect, 24 V dc 84330055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 20,300
USD: 126.31
-
KombiSIGN 70 843 Beacon Unit, Green LED, Steady Light Effect, 24 V dc 84320055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 20,400
USD: 126.93
-
KombiSIGN 70 843 Beacon Unit, Red LED Blinking, 24 V dc 84311055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 23,700
USD: 147.46
-
KombiSIGN 70 843 Beacon Unit, Yellow LED Blinking, 24 V dc 84331055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 23,700
USD: 147.46
-
Xenon, Blinking Beacon 817 Series, Red, Panel Mount, 24 V dc 81710055
Flashing High Xenon Beacon - 817 Series. Body constructed from ABS and lens Polycarbonate. All units are IP65. Polycarbonate caps have a shock resistance of 20J, according to ENV50014 1Hz flash rate 37mm mounting hole
1 products found
JPY: 45,200
USD: 281.23
-
KombiSIGN 70 844 Buzzer unit, , 24 V dc 84411855
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 21,300
USD: 132.53
-
Wall Bracket for use with 884 Beacons, 280, 838, 883 97588306
Rotating Mirror Beacon - 883 Series. Low wear friction drive provides improved service life/resistance to vibration Pressure compensating valve prevents condensation High impact resistance to 20 Joules IP 65 rating Mounting and connection without the need to disassemble the mechanism Lens, cable sealing gland ; halogen bulb included
1 products found
JPY: 6,170
USD: 38.39
-
Tube Mounting Braket for use with KombiSIGN 50/70/71 96000001
Werma Signal Tower Accessories and Fittings. A range of accessories for mounting Werma modular signal towers.
1 products found
JPY: 3,860
USD: 24.02
-
Surface Mounting Braket for use with KombiSIGN 70/71 96000002
Werma Signal Tower Accessories and Fittings. A range of accessories for mounting Werma modular signal towers.
1 products found
JPY: 3,860
USD: 24.02
-
Wall Bracket for use with 826, 827, 829, 885 Beacons 97582605
Accessories for 828 Series. Mounting Bracket for use with Werma 828 series
1 products found
JPY: 3,720
USD: 23.15
-
KombiSIGN 70 843 Beacon Unit, Clear LED, Steady Light Effect, 24 V dc 84340055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 32,400
USD: 201.59
-
KombiSIGN 70 843 Beacon Unit, Blue LED, Steady Light Effect, 24 V dc 84350055
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71. Stacking Signal Tower - KombiSIGN 70, 70mm, IP54. The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP54 for use in normal conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 32,400
USD: 201.59
-
LED, Steady Beacon 801 Series, Red, Panel Mount, 24 V ac/dc 80110075
Static Installation Beacons - 801 Series. Body constructed from ABS and lens Polycarbonate. All units are IP65. Suitable for panel mounting applications Polycarbonate caps have a shock resistance of 20J according to ENV50014 Tube mounting adaptor available Vandal proof
1 products found
JPY: 27,300
USD: 169.86
-
LED, Steady Beacon 801 Series, Green, Panel Mount, 24 V ac/dc 80120075
Static Installation Beacons - 801 Series. Body constructed from ABS and lens Polycarbonate. All units are IP65. Suitable for panel mounting applications Polycarbonate caps have a shock resistance of 20J according to ENV50014 Tube mounting adaptor available Vandal proof
1 products found
JPY: 27,300
USD: 169.86
-
Indicator Board for use with KombiSIGN 50/70/71 96000005
Werma Signal Tower Accessories and Fittings. A range of accessories for mounting Werma modular signal towers.
1 products found
JPY: 16,500
USD: 102.66
-
Black Wall Mount Buzzer, 72 mm Diameter, 24 V ac/dc, 100dB at 1 Metre 11000075
Tone setting and volume adjustment can only be achieved when unit is not fully installed. (Controls are mounted on the rear of the unit). Multi-Tone Electronic Buzzer 110. Designed for industrial use Protection to IP65 Sound output 100dB at 1m Switchable 8 tones Tone Frequency 1.6kHz to 3.4kHz Sweep/pulse 1Hz to 420Hz Volume control Supplied with screw terminal connector and sealing gasket Vertical wall mounting bracket available separately Housing material PC/ABS black Front protrusion 39.6mm
1 products found
JPY: 36,400
USD: 226.48
-
Wall Bracket for use with 110 Beacons 97510901
Tone setting and volume adjustment can only be achieved when unit is not fully installed. (Controls are mounted on the rear of the unit). Multi-Tone Electronic Buzzer 110. Designed for industrial use Protection to IP65 Sound output 100dB at 1m Switchable 8 tones Tone Frequency 1.6kHz to 3.4kHz Sweep/pulse 1Hz to 420Hz Volume control Supplied with screw terminal connector and sealing gasket Vertical wall mounting bracket available separately Housing material PC/ABS black Front protrusion 39.6mm
1 products found
JPY: 5,210
USD: 32.42
-
Incandescent, LED, Steady Beacon 206 Series, Red, Panel Mount, 12 → 48 V ac/dc 20610000
cULus. Bulb (B15d Watt max.) not included in assembly. Werma Static Installation Beacon - 206 Series. The 206 Series from Werma is a static installation beacon designed for mounting in panels or enclosures and is secured using a central fastening nut. The beacons are supplied without a bulb. A 12V incandescent bulb (stock no. ; 328-0350 328-0350 ) and a 24V incandescent bulb (stock no. ; 314-7382 314-7382 ) are available separately. The units can also be fitted with an LED lamp if desired. Static (permanent) beacon Optimised illumination with 360° visibility High protection rating IP65 PA-GF high impact housing, Ø 57 mm Five colours available, red, green, yellow, clear or blue Installation mounting for Ø 22.5 mm (M22 x 1.5 mm) with anti-twist device Simple connection by means of 6.3 mm spades (faston) Bulb change via removal of lens
1 products found
JPY: 13,500
USD: 84.00
-
Incandescent, LED, Steady Beacon 206 Series, Green, Panel Mount, 12 → 48 V ac/dc 20620000
cULus. Bulb (B15d Watt max.) not included in assembly. Werma Static Installation Beacon - 206 Series. The 206 Series from Werma is a static installation beacon designed for mounting in panels or enclosures and is secured using a central fastening nut. The beacons are supplied without a bulb. A 12V incandescent bulb (stock no. ; 328-0350 328-0350 ) and a 24V incandescent bulb (stock no. ; 314-7382 314-7382 ) are available separately. The units can also be fitted with an LED lamp if desired. Static (permanent) beacon Optimised illumination with 360° visibility High protection rating IP65 PA-GF high impact housing, Ø 57 mm Five colours available, red, green, yellow, clear or blue Installation mounting for Ø 22.5 mm (M22 x 1.5 mm) with anti-twist device Simple connection by means of 6.3 mm spades (faston) Bulb change via removal of lens
1 products found
JPY: 13,500
USD: 84.00
-
LED, Steady Beacon 207 Series, Red, Panel Mount, 24 V ac/dc 20710075
Static Installation - Series 207. 57mm diameter Panel cut out M22 (22.5 mm) with 6.3 mm Faston connections
1 products found
JPY: 27,600
USD: 171.73
-
LED, Steady Beacon 207 Series, Green, Panel Mount, 24 V ac/dc 20720075
Static Installation - Series 207. 57mm diameter Panel cut out M22 (22.5 mm) with 6.3 mm Faston connections
1 products found
JPY: 27,600
USD: 171.73
-
LED, Steady Beacon 231 Series, Red, Panel Mount, 24 V dc 23110055
Miniature M22 LED Installation - Series 231. High intensity chip-on-board LED's M22x1.5mm thread for control panel applications
1 products found
JPY: 21,900
USD: 136.26
-
G6.35 Halogen Bulb, Clear, 115 V ac, 12 V dc 95588334
Rotating Mirror Beacon - 883 Series. Low wear friction drive provides improved service life/resistance to vibration Pressure compensating valve prevents condensation High impact resistance to 20 Joules IP 65 rating Mounting and connection without the need to disassemble the mechanism Lens, cable sealing gland ; halogen bulb included
1 products found
JPY: 3,740
USD: 23.27
-
KombiSIGN 71 644 Beacon Unit, Red LED, Steady Light Effect, 24 V dc 64410075
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70. Stacking Signal Tower - KombiSIGN 71, 70 mm, IP65. The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP65 for use in extreme conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Optional self adjusting siren automatically adjusts output between 80 ; 100 dB depending on ambient sound levels AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring Improved connection with cage clamp technology Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 14,000
USD: 87.11
-
KombiSIGN 71 644 Beacon Unit, Green LED, Steady Light Effect, 24 V dc 64420075
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70. Stacking Signal Tower - KombiSIGN 71, 70 mm, IP65. The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP65 for use in extreme conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Optional self adjusting siren automatically adjusts output between 80 ; 100 dB depending on ambient sound levels AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring Improved connection with cage clamp technology Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 14,000
USD: 87.11
-
KombiSIGN 71 644 Beacon Unit, Yellow LED, Steady Light Effect, 24 V dc 64430075
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70. Stacking Signal Tower - KombiSIGN 71, 70 mm, IP65. The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP65 for use in extreme conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Optional self adjusting siren automatically adjusts output between 80 ; 100 dB depending on ambient sound levels AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring Improved connection with cage clamp technology Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 14,000
USD: 87.11
-
KombiSIGN 71 645 Buzzer unit, , 24 V dc 64580075
UL listed, CSA, VDE. Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 70. Stacking Signal Tower - KombiSIGN 71, 70 mm, IP65. The WERMA KombiSIGN 71 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place. Features and Benefits. Suitable for machine and manual Andon indication Modular system allows a completely free combination of optical and audible signal elements Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system Completely safe element changes (contact-voltage proof) without the need for tools Protection rating IP65 for use in extreme conditions Up to 5 elements can be mounted on a terminal base Flexible combination of optical and audible elements Optical isolation due to O-ring seal stopping illumination of adjacent element Operating voltage for the continuous incandescent element is dependant on bulb fitted LED EVS elements have an extremely bright, random sequence of light to immediately grab attention Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word) Optional self adjusting siren automatically adjusts output between 80 ; 100 dB depending on ambient sound levels AS-Interface element can be easily connected to the networking system which considerably reduces complex wiring Improved connection with cage clamp technology Operating temperature range is -20 to +50 °C Polyamide body with polycarbonate lenses, 70 mm diameter. Permanent Multi-colour LED Light Element. Seven colours in one beacon Different colours can be triggered via the pins in the terminal element Positive and negative control logic The three basic colours (red/yellow/green) can be triggered using only two PLC outputs High light intensity
1 products found
JPY: 13,200
USD: 82.13
-
150 Buzzer Beacon, Red LED, 24 V dc 15010055
LED/Buzzer Combination 150. LED beacon with integral buzzer that can be activated optionally Starting Current: <0.5A Life duration: <50000 hrs Protection: IP65 Designed for industrial use on equipment using standard front panel 22.5mm mounting holes Continuous use Supplied with screw terminal connector and sealing gasket
1 products found
JPY: 23,300
USD: 144.97
-
150 Buzzer Beacon, Yellow LED, 24 V dc 15030055
LED/Buzzer Combination 150. LED beacon with integral buzzer that can be activated optionally Starting Current: <0.5A Life duration: <50000 hrs Protection: IP65 Designed for industrial use on equipment using standard front panel 22.5mm mounting holes Continuous use Supplied with screw terminal connector and sealing gasket
1 products found
JPY: 23,300
USD: 144.97
-
Bulb Cage for use with 280 Series 97588308
Rotating Mirror Beacon - 883 Series. Low wear friction drive provides improved service life/resistance to vibration Pressure compensating valve prevents condensation High impact resistance to 20 Joules IP 65 rating Mounting and connection without the need to disassemble the mechanism Lens, cable sealing gland ; halogen bulb included
1 products found
JPY: 28,900
USD: 179.82
-
KombiSIGN 71 960 Mounting Base with Tube 96069303
For M12 plug connection versions an M12, 4 way cable assembly must be purchased separately, suitable stock number ; 291-5881 291-5881. Type 693 - Black Casing. Can be operated with PLC control system LED permanent light (up to 50000 hours) Plastic housing IP65 rating Available with 2m cable or M12 plug connection Optional base with integrated tube Operating temperature range -20 to +50°C
1 products found
JPY: 8,130
USD: 50.59
-
420 Sounder Beacon, Red LED, 24 V ac/dc 42012075
Non-replaceable bulbs. Sounder / LED Beacon - 420 Series. Permanent LED illumination Choice of 8 tones, adjustable sound output, up to 100dB Optical & audible signal can be triggered separately Easy to mount IP65 rated
1 products found
JPY: 54,400
USD: 338.48
-
424 Horn Beacon, 98dB, Yellow LED, 24 V ac/dc 42432075
Sound oulet must face downwards. Continuous Tone LED/Horn Combination 424. Electronic horn and LED permanent beacon Adjustable sound output from 50dB up to max. Optical and audible signal can be triggered separately Life duration: 50,000 hours (LED) and 5,000 hours (horn)
1 products found
JPY: 54,800
USD: 340.97
-
424 Horn Beacon, 98dB, Red LED, 24 V ac/dc 42412075
Sound oulet must face downwards. Continuous Tone LED/Horn Combination 424. Electronic horn and LED permanent beacon Adjustable sound output from 50dB up to max. Optical and audible signal can be triggered separately Life duration: 50,000 hours (LED) and 5,000 hours (horn)
1 products found
JPY: 53,100
USD: 330.39
-
Werma 85dB Panel Mount Continuous Internal Piezo Buzzer 114 068 15
RS Pro Panel hole mount continuous tone buzzer faston terminals. Features and Benefits. Compact size panel mounting Continuous tone buzzers 6.3 x 0.8mm faston connector size
1 products found
JPY: 14,300
USD: 88.98
-
Werma 90dB Panel Mount Continuous Internal Piezo Buzzer 118 068 15
RS Pro Panel hole mount continuous tone buzzer faston terminals. Features and Benefits. Compact size panel mounting Continuous tone buzzers 6.3 x 0.8mm faston connector size
1 products found
JPY: 13,900
USD: 86.49
-
Werma 90dB Panel Mount Continuous, Slow Pulse Internal Piezo Buzzer 119 068 15
Panel hole mount multifunction buzzer faston terminals. Panel hole mounting multifunction buzzer three or more 6.3 x 0.8mm faston connectors High output levels Internal circuitry for dc operation
1 products found
JPY: 20,700
USD: 128.80
