Maxon

Maxon Brushed DC Motor, 5 W, 18 V dc, 6.25 mNm, 9970 rpm, 2mm Shaft Diameter　110124

22mm Miniature dc Motors. Suitable for fitting to 24mm spur or 22mm planetary gearheads

Maxon

Maxon 220300 Connector　220300

Motor Connection Units. These units facilitate the connecting of Flat brushless motors with Flex connectors such as stock no. ; 420-5192 420-5192 or similar motors to a controller This unit has a Flex connector at one end to accommodate the motor lead and a screw terminal block at the other for the wiring to the controller Two alternative units available Use 4 way for use with motors without sensors Use 8 way for use with motors with sensors

Maxon

Maxon 110518 Encoder　110518

Encoder Unit. This encoder is required when operating motors with stock nos. ; 418-4045 418-4045 , ; 418-5571 418-5571 or similar type of controller Line driver built into the encoder

Maxon

Maxon Brushed DC Motor, 2 W, 24 V dc, 2.1 mNm, 13800 rpm, 1.5mm Shaft Diameter　110049

16mm Miniature dc Motor, Model B. Revised brushgear for improved commutation and reliability Replacements for Miniature dc Servo Motors (stock nos. ; 440-111 440-111 ; ; 440-127 440-127 ) Can be used with 16mm and planetary gearheads Speed Constant: 1390rpm/V (stock no. ; 420-5164 420-5164 ); 586rpm/V (stock no. ; 420-5170 420-5170 )

Maxon

Maxon Brushed DC Motor, 15 W, 18 V dc, 37.5 mNm, 5270 rpm, 4mm Shaft Diameter　236646

32mm Miniature dc Motor, Model D. Standard shaft motor with no pinion fitted Revised brushgear for improved commutation and reliability Speed Constant: 297rpm/V (stock no. < 420-5186') 420-5186

Maxon

Maxon Brushless DC Motor, 30 W, 12 V dc, 59 mNm, 4370 rpm, 4mm Shaft Diameter　200142

45mm Miniature dc Motor, Model EC45 Flat. Brushless DC motors of flat design with a low profile body Speed constant: 374rpm/V Available in 2 versions: Standard, stock no. ; 420-4997 420-4997 , or with Hall effect sensors, stock nos. ; 420-5192 420-5192 and ; 495-063 495-063 Standard version is suitable for conventional voltage dependent applications Hall effect versions ideal for feedback speed controlled applications Suitable controller for the standard version Maxon controller AECS35-3 (stock no. ; 418-4051 418-4051 ) Suitable controller for the Hall effect versions Maxon controller DEC50-5 (stock no. ; 418-4045 418-4045 ) To facilitate connection of the motor to the controller, the use of a motor connection unit is recommended Utilise the 4 way unit (stock no. ; 420-5091 420-5091 ) for the standard motor ; 420-4997 420-4997 and the 8 way unit (stock no. ; 420-5108 420-5108 ) for motor (stock no. ; 420-5192 420-5192 )

Maxon

Maxon Brushed DC Motor, 150 W, 24 V dc, 170 mNm, 7580 rpm, 6mm Shaft Diameter　148867

40mm Miniature dc Motor, RE Model. Motors intended to be used with planetary gearheads; assembly of the two is quick and easy, requiring no special tools Motors can be used with GP42 42mm gearheads e.g. (stock no. ; 420-5041 420-5041 ) using fitting kit (stock no. ; 468-4775 468-4775 ) Speed Constant: 581rpm/V (stock no. ; 468-4797 468-4797 ); 317rpm/V (stock no. ; 468-4804 468-4804 )

Maxon

Maxon Brushed DC Motor, 0.75 W, 6 V dc, 0.784 mNm, 13000 rpm, 1mm Shaft Diameter　118386

10mm Miniature dc Motor. Motors intended to be used with planetary gearheads; assembly of the two is quick and easy, requiring no special tools Speed Constant: 2230rpm/V (stock no. ; 468-4810 468-4810 ); 1000rpm/V (stock no. ; 468-4826 468-4826 )

Maxon

Maxon Brushed DC Motor, 0.75 W, 12 V dc, 0.746 mNm, 11600 rpm, 1mm Shaft Diameter　118391

10mm Miniature dc Motor. Motors intended to be used with planetary gearheads; assembly of the two is quick and easy, requiring no special tools Speed Constant: 2230rpm/V (stock no. ; 468-4810 468-4810 ); 1000rpm/V (stock no. ; 468-4826 468-4826 )

Maxon

Maxon 403112 Servo Drive 55mm Length,, 4 A, 10 to 36 V dc, 72 W　403112

ESCON 36/2 DC Servo Controller. The ESCON 36/2 DC Controller can be used to control brushed motors up to 72W Sensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) ; DC Tacho Three operating modes including current controller (torque control), speed controller and speed controller (open loop)

Maxon

Maxon 403965 Digital I/O Cable for use with ESCON 36/2 DC Servo Controller　403965

ESCON 36/2 DC Servo Controller. The ESCON 36/2 DC Controller can be used to control brushed motors up to 72W Sensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) ; DC Tacho Three operating modes including current controller (torque control), speed controller and speed controller (open loop)

Maxon

Maxon, DC Motor Controller, 1 Phase, Analogue, Digital Control, 10 → 50 V dc, 15 A, Flange Mount　409510

They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. ESCON DC Servo Controllers. A range of Escon controllers from Maxon that are small but powerful 4- Quadrant PWM servo controllers for the highly efficient control of permanent magnet activated DC motors. The controllers are reliable and are protected against overcurrent, under and overvoltage, excess temperature, short circuits in the motor cable, voltage transients and can also help protect both load and motor with protected digital inputs and outputs and an adjustable current limitation. The brushless DC motors have various operating modes which include speed controller (closed loop) which compares the actual speed signal with an applied set value. In case of deviation, the speed is dynamically readjusted, and speed controller (open loop) which feeds the motor with a voltage proportional to the applied speed set value.

Maxon

Maxon Adapter for use with EC 10 Motor, EC 13 Motor, EC 20 Flat Motor, EC 32 Flat Motor, EC 45 Flat Motor　418719

ESCON Servo Controller Accessories

Maxon

Maxon Planetary Gearbox, 84:1 Gear Ratio, 0.3 Nm Maximum Torque　110323

16mm Planetary Gearhead

Maxon

Maxon Planetary Gearbox, 19:1 Gear Ratio, 0.8 Nm Maximum Torque　110338

22mm Planetary Gearhead - Metal Version

Maxon

Maxon Brushless DC Motor, 30 W, 12 V dc, 54.3 mNm, 4360 rpm, 4mm Shaft Diameter　200189

45mm Miniature dc Motor, Model EC45 Flat. Brushless DC motors of flat design with a low profile body Speed constant: 374rpm/V Available in 2 versions: Standard, stock no. ; 420-4997 420-4997 , or with Hall effect sensors, stock nos. ; 420-5192 420-5192 and ; 495-063 495-063 Standard version is suitable for conventional voltage dependent applications Hall effect versions ideal for feedback speed controlled applications Suitable controller for the standard version Maxon controller AECS35-3 (stock no. ; 418-4051 418-4051 ) Suitable controller for the Hall effect versions Maxon controller DEC50-5 (stock no. ; 418-4045 418-4045 ) To facilitate connection of the motor to the controller, the use of a motor connection unit is recommended Utilise the 4 way unit (stock no. ; 420-5091 420-5091 ) for the standard motor ; 420-4997 420-4997 and the 8 way unit (stock no. ; 420-5108 420-5108 ) for motor (stock no. ; 420-5192 420-5192 )

Maxon

Maxon Planetary Gearbox, 74:1 Gear Ratio, 22.5 Nm Maximum Torque　203123

42mm Planetary Gearhead

Maxon

Maxon Brushed DC Motor, 5 W, 36 V dc, 6.15 mNm, 9800 rpm, 2mm Shaft Diameter　110127

22mm Miniature dc Motors. Suitable for fitting to 24mm spur or 22mm planetary gearheads

Maxon

Maxon, 12 V dc, 0.9 Nm, 1.2 Nm, Brushed DC Geared Motor, Output Speed 476 rpm　B75D3A7A0364

Geared DC Motor 12V. The range of brushed DC geared motors at 12v have a planetary gearhead suitable for transeferring high torque. The motors are pre-loaded with ball bearings at the gearhead output. Suitable for high torque High speed input Low noise and low backlash Concentric gear input and output

Maxon

Maxon, 12 V dc, 3.3 Nm, 3.8 Nm, Brushed DC Geared Motor, Output Speed 97 rpm　B75D3A7ED6BO

Geared DC Motor 12V. The range of brushed DC geared motors at 12v have a planetary gearhead suitable for transeferring high torque. The motors are pre-loaded with ball bearings at the gearhead output. Suitable for high torque High speed input Low noise and low backlash Concentric gear input and output

Maxon

Maxon, 24 V dc, 0.9 Nm, 1.2 Nm, Brushed DC Geared Motor, Output Speed 476 rpm　B75D3A7B52FO

Geared DC Motor 24V. The range of brushed DC geared motors at 24v have a planetary gearhead suitable for transeferring high torque. The motors are pre-loaded with ball bearings at the gearhead output. Suitable for high torque High speed input Low noise and low backlash Concentric gear input and output

Maxon

Maxon, 24 V dc, 3.3 Nm, 3.8 Nm, Brushed DC Geared Motor, Output Speed 97 rpm　B75D3A7F22D2

Geared DC Motor 24V. The range of brushed DC geared motors at 24v have a planetary gearhead suitable for transeferring high torque. The motors are pre-loaded with ball bearings at the gearhead output. Suitable for high torque High speed input Low noise and low backlash Concentric gear input and output

Maxon

Maxon, 24 V dc, 3.3 Nm, 3.8 Nm, Brushed DC Geared Motor, Output Speed 43 rpm　B75D3C444AFD

Geared DC Motor 24V. The range of brushed DC geared motors at 24v have a planetary gearhead suitable for transeferring high torque. The motors are pre-loaded with ball bearings at the gearhead output. Suitable for high torque High speed input Low noise and low backlash Concentric gear input and output

Maxon

Maxon Planetary Gearbox, 4.8:1 Gear Ratio, 1.13 Nm Maximum Torque　166156

32mm Planetary Gearhead

Maxon

Maxon Planetary Gearbox, 1621:1 Gear Ratio, 0.45 Nm Maximum Torque　110325

16mm Planetary Gearhead

Maxon

Maxon 403964 Analogue I/O Cable for use with ESCON 36/2 DC Servo Controller　403964

ESCON 36/2 DC Servo Controller. The ESCON 36/2 DC Controller can be used to control brushed motors up to 72W Sensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) ; DC Tacho Three operating modes including current controller (torque control), speed controller and speed controller (open loop)

Maxon

Maxon 403962 Motor Cable for use with ESCON 36/2 DC Servo Controller　403962

ESCON 36/2 DC Servo Controller. The ESCON 36/2 DC Controller can be used to control brushed motors up to 72W Sensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) ; DC Tacho Three operating modes including current controller (torque control), speed controller and speed controller (open loop)

Maxon

Maxon 403957 Power Cable for use with ESCON 36/2 DC Servo Controller　403957

ESCON 36/2 DC Servo Controller. The ESCON 36/2 DC Controller can be used to control brushed motors up to 72W Sensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) ; DC Tacho Three operating modes including current controller (torque control), speed controller and speed controller (open loop)

Maxon

Maxon, 24 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 135 rpm　123853

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 24 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 230 rpm　123852

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 24 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 42 rpm　123855

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 24 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 4 rpm　123858

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 12 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 68 rpm　123827

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 12 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 135 rpm　123825

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon, 12 V dc, 0.6 Nm, Brushed DC Geared Motor, Output Speed 21 rpm　123829

38mm Spur Geared Motors - 12/24Vdc. DC Motors with gearhead 38mm combination. Motor-Gearhead-Combination Motor A-max with precious metall brushes, 26mm diameter Spur Gearhead, 38mm diameter 12Vdc and 24Vdc supply voltage available Power consumption 7W With terminals

Maxon

Maxon 220310 Connector　220310

Motor Connection Units. These units facilitate the connecting of Flat brushless motors with Flex connectors such as stock no. ; 420-5192 420-5192 or similar motors to a controller This unit has a Flex connector at one end to accommodate the motor lead and a screw terminal block at the other for the wiring to the controller Two alternative units available Use 4 way for use with motors without sensors Use 8 way for use with motors with sensors

Maxon

Maxon, DC Motor Controller, +5 V dc, 10 A, Socket Mount　380200

Maxon

Maxon Brushless DC Motor, 260 W, 48 V, 964 mNm, 13100 (Stall) mNm, 5000 RPM, 10mm Shaft Diameter　500267

Maxon

Maxon Brushless DC Motor, 160 W, 24 V, 457 mNm, 7910 (Stall) mNm, 5000 RPM, 10mm Shaft Diameter　515458

Maxon

Maxon, 12 V, 1.6 nm, Brushed DC Geared Motor, Output Speed 5260 RPM, 7140 (No Load) RPM　B7744E73E907