Cooper Bussmann

Cooper Bussmann HTC Series 6.3A Slotted Cap Panel Mount Fuse Holder for 5 x 20mm Fuse, PC2　HTC-30M

'BUSSMANN' Screw Cap, Finger Release. Finger/tool release screw cap Protection: PC2

Cooper Bussmann

Cooper Bussmann 6.3A Slotted Cap PCB Mount Fuse Holder for 5 x 20mm Cartridge Fuse, 250V　HTC-45M

UL recognised component; CSA certified; SEMKO. 'BUSSMANN' Bayonet Cap, HTC Series. For 5 x 20 mm fuses Horizontal or vertical mount formats

Cooper Bussmann

Cooper Bussmann 6.3A Slotted Cap PCB Mount Fuse Holder for 5 x 20mm Cartridge Fuse, 250V　HTC-50M

UL recognised component; CSA certified; SEMKO. 'BUSSMANN' Bayonet Cap, HTC Series. For 5 x 20 mm fuses Horizontal or vertical mount formats

Cooper Bussmann

Cooper Bussmann 24V Fuse Tester for Automotive, Ferrule, Glass Fuses　TF-2

Do not test electrical fuses in the fuse panel. Fuse Checker. The Cooper Bussmann FT-2 Fuse Tester adjusts easily to allow the testing of different size fuses quickly and easily. Tests automotive, glass tube ferrule fuses up to 17/8 " length Supplied with batteries

Cooper Bussmann

Cooper Bussmann, 500mA Melamine Cartridge Fuse, 10 x 38mm, Speed F　KTK-1/2

UL listed, CSA certified. 10 x 38 Fast Acting, KTK Series. American Midget style 10x38mm fuses. Ideal for use in circuits with high a.c. fault current capacity 100kA breaking capacity Voltage rating 600Vac Typical Applications: Control circuits, Lighting circuit protection, meter circuits.

Cooper Bussmann

Cooper Bussmann, 2A Melamine Cartridge Fuse, 10 x 38mm, Speed F　KTK-2

UL listed, CSA certified. 10 x 38 Fast Acting, KTK Series. American Midget style 10x38mm fuses. Ideal for use in circuits with high a.c. fault current capacity 100kA breaking capacity Voltage rating 600Vac Typical Applications: Control circuits, Lighting circuit protection, meter circuits.

Cooper Bussmann

Cooper Bussmann, 25A Melamine Cartridge Fuse, 10 x 38mm, Speed F　KTK-25

UL listed, CSA certified. 10 x 38 Fast Acting, KTK Series. American Midget style 10x38mm fuses. Ideal for use in circuits with high a.c. fault current capacity 100kA breaking capacity Voltage rating 600Vac Typical Applications: Control circuits, Lighting circuit protection, meter circuits.

Cooper Bussmann

Cooper Bussmann, 30A Melamine Cartridge Fuse, 10 x 38mm, Speed F　KTK-30

UL listed, CSA certified. 10 x 38 Fast Acting, KTK Series. American Midget style 10x38mm fuses. Ideal for use in circuits with high a.c. fault current capacity 100kA breaking capacity Voltage rating 600Vac Typical Applications: Control circuits, Lighting circuit protection, meter circuits.

Cooper Bussmann

Cooper Bussmann, 440mA Melamine Cartridge Fuse, 10 x 35mm, Speed F　DMM-B-44/100

UL; CSA. Fluke Multimeter Series III/IV/ GMM Fuses. DMM-B-44/100 Series fuses from Bussmann are quick acting cartridge fuses with a High Breaking Capacity (HBC). These fuses are for multi meters only, suitable for various Fluke multi meter models. Features and Benefits. - Nickel plated end caps - Melamine tube - Designed for multimeters only - Intended to carry 100% of rated current indefinitely - Interrupting rating of 10000A at 1000VAC with unity power factor - Interrupting rating of 10000A at 1000VDC with time constant of 2.2ms - Fuse size is 10mm x 34.9mm 40 mA Fuse (459-7918): 10.3 x 35 mm, 1000 V ac/dc, 10 kA, fuse for use with: Fluke (Series III) 77, 79, 23, 26, 83, 97, and Fluke (Series IV) 78, 79 11 A Fuse (459-7924): 10.3 x 38 mm, 1000 V ac/dc, 17 kA, fuse for use with: Fluke (Series III) 70, 23, 75, 77, 79, 21, 23, 26, 83, 85, 87, and Fluke (Series GMM) 863, 867 Applications Safety

Cooper Bussmann

Cooper Bussmann, 11A Melamine Cartridge Fuse, 10 x 38mm, Speed F　DMM-B-11A

UL; CSA. Fluke Multimeter Series III/IV/ GMM Fuses. DMM-B-44/100 Series fuses from Bussmann are quick acting cartridge fuses with a High Breaking Capacity (HBC). These fuses are for multi meters only, suitable for various Fluke multi meter models. Features and Benefits. - Nickel plated end caps - Melamine tube - Designed for multimeters only - Intended to carry 100% of rated current indefinitely - Interrupting rating of 10000A at 1000VAC with unity power factor - Interrupting rating of 10000A at 1000VDC with time constant of 2.2ms - Fuse size is 10mm x 34.9mm 40 mA Fuse (459-7918): 10.3 x 35 mm, 1000 V ac/dc, 10 kA, fuse for use with: Fluke (Series III) 77, 79, 23, 26, 83, 97, and Fluke (Series IV) 78, 79 11 A Fuse (459-7924): 10.3 x 38 mm, 1000 V ac/dc, 17 kA, fuse for use with: Fluke (Series III) 70, 23, 75, 77, 79, 21, 23, 26, 83, 85, 87, and Fluke (Series GMM) 863, 867 Applications Safety

Cooper Bussmann

Cooper Bussmann, 2A Cartridge Fuse, 10 x 38mm　C10G2

Cooper Bussmann

Cooper Bussmann, 25A Ceramic Cartridge Fuse, 10 x 38mm, Speed 5ST　C10G25

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann 30A Rail Mount Fuse Holder With Indicator for 10 x 38mm Fuse, 600V ac　CCP-2-30CC

Bussmann Compact Circuit Protectors. Extremely compact design Padlockable handle for lockout/tagout procedures 35mm DIN rail mount

Cooper Bussmann

Cooper Bussmann 30A Rail Mount Fuse Holder With Indicator for 10 x 38mm Fuse, 600V ac　CCP-3-30CC

Bussmann Compact Circuit Protectors. Extremely compact design Padlockable handle for lockout/tagout procedures 35mm DIN rail mount

Cooper Bussmann

Cooper Bussmann, 1A Ceramic Cartridge Fuse, 10 x 38mm　PV-1A10F

Bussmann Cylindrical Photovoltaic Fuses. Cooper Bussmann PV fuses are specifically designed for protection and isolation of photovoltaic strings. These fuses are designed for use in systems with extreme ambient temperatures and offer low watts loss performance for energy efficiency. PV fuses work in high cycling and low fault conditions, reverse current, multi-array fault and string arrays.

Cooper Bussmann

Cooper Bussmann, 15A Ceramic Cartridge Fuse, 10 x 38mm　PV-15A10F

Bussmann Cylindrical Photovoltaic Fuses. Cooper Bussmann PV fuses are specifically designed for protection and isolation of photovoltaic strings. These fuses are designed for use in systems with extreme ambient temperatures and offer low watts loss performance for energy efficiency. PV fuses work in high cycling and low fault conditions, reverse current, multi-array fault and string arrays.

Cooper Bussmann

Cooper Bussmann 1A Surface Mount Fuse, 1000V dc　PV-1A10-2P

Bussmann 2 Pin PCB Fixing Photovoltaic Fuses

Cooper Bussmann

Cooper Bussmann, 1A Ceramic Cartridge Fuse, 10 x 38mm　C10G1

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 4A Ceramic Cartridge Fuse, 10 x 38mm　C10G4

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 6A Ceramic Cartridge Fuse, 10 x 38mm　C10G6

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 8A Ceramic Cartridge Fuse, 10 x 38mm　C10G8

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 10A Ceramic Cartridge Fuse, 10 x 38mm　C10G10

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 20A Ceramic Cartridge Fuse, 10 x 38mm　C10G20

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.

Cooper Bussmann

Cooper Bussmann, 16A Ceramic Cartridge Fuse, 10 x 38mm　C10G16

IEC Cylindrical Fuses. Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards. What material are these made from? All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps. Why choose ceramic cartridge fuse? Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating. What size is it? Sizes 8 x 32 mm, 10x38 mm, 14x51 mm ; 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator. What voltage is it? This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. What are fuses used for? For the protection of components and equipment from costly damage used by over-current To isolate sub-systems from the main system once a fault has appeared What is on overcurrent? It is a setting where a circuit experiences a current that is higher than the normal operating current.