[Mascot] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
40W Fixed Installation Car Power Adapter, 10 → 16V dc / 24V dc 8862000081
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 36,200
USD: 225.24
-
27W Fixed Installation Car Power Adapter, 12V dc / 6V dc 9061/12/06
27 W voltage converters. 6 Vdc output voltage converters providing a perfectly regulated voltage. Ideal for supplying onboard modules in vehicles. Surge and short-circuit protection.
1 products found
JPY: 17,900
USD: 111.37
-
100W Fixed Installation Car Power Adapter, 12V dc / 24V dc 8660/12/24
Galvanic separation switch mode converter. Switch mode converter with independent input and output isolated from the chassis. This converter is essential within an automotive electronic system as it offsets the variations in output voltage from the battery caused by the load or by the engine starting. The converter features surge and short-circuit protection. The output voltage is not stabilised.
1 products found
JPY: 51,000
USD: 317.32
-
40W Fixed Installation Car Power Adapter, 10 → 16V dc / 13.2V dc 8862000080
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 26,500
USD: 164.88
-
106W Fixed Installation Car Power Adapter, 18 → 32V dc / 13.2V dc 9460000044
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 20,500
USD: 127.55
-
81W Fixed Installation Car Power Adapter, 72 → 110V dc / 13.2V dc 9262000044
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 25,100
USD: 156.17
-
158W Fixed Installation Car Power Adapter, 40 → 64V dc / 13.2V dc 9260000048
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 34,600
USD: 215.28
-
40W Fixed Installation Car Power Adapter, 20 → 32V dc / 13.5V dc 9062000047
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 10,900
USD: 67.82
-
81W Fixed Installation Car Power Adapter, 18 → 32V dc / 24V dc 8862000098
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 35,500
USD: 220.88
-
Mascot Mounting Kit for use with 719, 2023, 2024, 2026, 2047, 8421, 9150, 9221, 9521, 9522, 9527, 9623, 9726 9000000125
Mounting Bracket for Mascot SMPSU. 2 mild steel mounting brackets designed for Mascot SMPSU models.
1 products found
JPY: 1,160
USD: 7.22
-
Mascot Mounting Kit for use with 2025, 2043, 2044, 8921, 9260, 9660 9000000127
Mounting Bracket for Mascot SMPSU. 2 mild steel mounting brackets designed for Mascot SMPSU models.
1 products found
JPY: 1,350
USD: 8.40
-
168W Fixed Installation Car Power Adapter, 18 → 32V dc / 24V dc 9260000057
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 34,500
USD: 214.66
-
79W Fixed Installation Car Power Adapter, 40 → 64V dc / 13.2V dc 8862-48/12
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 45,000
USD: 279.99
-
110W DC-AC Car Power Inverter, 11 → 15V dc / 230V ac 9150-12
EMKO-TUB (61) S003/85, EN 55014 L. DC / AC converters 110 W / 140 W. DC / AC converters are used as a mains power supply in vehicles or various applications requiring an alternative current source to be output. They are ideal for supplying a unit drawing 220 Vac from a 12 V or 24 V direct voltage source (battery type). They convert the DC voltage into AC voltage.
1 products found
JPY: 64,600
USD: 401.94
-
［Discontinued］300W DC-AC Car Power Inverter, 12V dc / 230V ac 2985120039
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 21,560
USD: 134.15
-
［Discontinued］72W Fixed Installation Car Power Adapter, 40 → 64V dc / 24V dc 8862-48/24
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 38,800
USD: 241.41
-
［Discontinued］158W Fixed Installation Car Power Adapter, 18 → 32V dc / 13.2V dc 9260000047
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 45,000
USD: 279.99
-
［Discontinued］600W DC-AC Car Power Inverter, 20 → 30V dc / 230V ac 9986000042
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 29,880
USD: 185.91
-
［Discontinued］Mascot Interchangeable Plug for use with Power Supply 3615
Mascot Snap-lock Plugs. DC-X, exchangeable DC plugs with snap-lock for added safety Ends are clearly marked to connect desired polarity
1 products found
JPY: 150
USD: 0.93
-
［Discontinued］150W DC-AC Car Power Inverter, 24V dc / 230V ac 2984000044
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 13,100
USD: 81.51
-
［Discontinued］150W DC-AC Car Power Inverter, 12V dc / 230V ac 2984122939
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 13,100
USD: 81.51
-
［Discontinued］300W DC-AC Car Power Inverter, 12V dc / 230V ac 2985000041
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 21,560
USD: 134.15
-
［Discontinued］300W DC-AC Car Power Inverter, 24V dc / 230V ac 2985000042
The user is responsible for ensuring the suitability of any equipment connected to these power adaptors - protect from moisture. EN 60950. When using the 120W units with cigar lighter plugs the vehicle socket must have a rating of 1A (0·5A for 24V units) for every 10W of supplied power. Modified Sine Wave, 120 to 1500W 3 Pin UK, 2 Pin Euro or Schuko Output Sockets. Modified sine wave DC/AC inverters with EU or UK output socket. These modified sine wave DC/AC inverters are 'E' approved for vehicle applications, have a compact design and are short circuit protected. 10 to 15Vdc or 20 to 30Vdc input Input connection via screw terminals (model 9985, 9986 and 9987 - model 9985 also supplied with a set of battery leads), battery clips (model 2985) or cigar plug (model 9984 and 2984) Choice of 3-pin UK, 2-pin Euro or Schuko output socket options 'E' approved for vehicle applications Low battery shut down Low battery alarm Input overvoltage, over temperature and overload protection Short circuit proof Illuminated on/off switch Harmonic compliance to EN 61000 Ideal for powering mobile office equipment, small power tools, appliances and emergency power applications A separate remote control (stock no. ; 397-9735 397-9735 ) allows models 9987 and 9988 inverters to be switched on or off from up to 5m away, and plugs directly into the inverter
1 products found
JPY: 21,560
USD: 134.15
-
［Discontinued］110W Fixed Installation Car Power Adapter, 20 → 32V dc / 13.5V dc 9261000042
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 19,800
USD: 123.20
-
［Discontinued］81W Fixed Installation Car Power Adapter, 21 → 32V dc / 13.2V dc 9262000043
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For in vehicle use only. Protect from moisture. All have 6.3mm push-on terminals apart from stk nos ; 397-9583 397-9583 and ; 397-9599 397-9599 which have screw terminals. Linear units have a common negative connection between input and output. Switch Mode units have electrical separation between input/output/chassis, except stock nos. ; 397-9583 397-9583 , ; 452-8603 452-8603 , ; 218-4835 218-4835 , ; 243-1131 243-1131 ; ; 397-9599 397-9599 which are not-isolated. 27W to 276W Linear ; Switch Mode, DC to DC Battery Voltage Converters. Wide input voltage range Regulated output Input protected against reverse polarity Input fuse protection Ouput overvoltage protection EMC to EN50081-1/50082-1 12Vdc and 24Vdc input types are 'E' approved for vehicle applications. Additional features on switch mode units. Electrical isolation between input/output/chassis Short circuit proof Thermal protection
1 products found
JPY: 16,100
USD: 100.17
-
［Discontinued］Mascot Interchangeable Plug for use with Power Supply 3617
Mascot Snap-lock Plugs. DC-X, exchangeable DC plugs with snap-lock for added safety Ends are clearly marked to connect desired polarity
1 products found
JPY: 230
USD: 1.43
