Schmersal

Schmersal TRIANGULAR KEY TK-M5 Key, For Use With AmGard Locks, mGard Locks　TRIANGULAR KEY TK-M5

CSA, BG, UL. Schmersal AZM170 Solenoid Interlock Switch Accessories. A range of accessories for the AZM170 solenoid interlock switches from Schmersal. AZM 170-B6, 50mm, flexible AZ 17/170-B1, 140mm, straight, rigid AZ 17/170-B15, 140mm, angled AZ 17/170-B11, 140mm, straight AZ 17/170-B5, 140mm, angled AZ 17/170-B1-2245, 140mm, straight, rubber mounting

Schmersal

Schmersal BPS 16 Actuator, For Use With BNS 16 Safety Switch　BPS 16

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS16), magnet (BPS16) and a safety monitoring module (AES) is used.

Schmersal

Schmersal BPS 260-1 Actuator, For Use With BNS 260 Safety Switch　BPS 260-1

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used. IEC/EN60947-5-3, BG-GS-ET-14. Actuating magnet not included, see accessories, for example ; 617-5374 617-5374 // ; 617-5380 617-5380. BNS 260, Miniature Coded. Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1 IP67 protection

Schmersal

AZ16 Safety Interlock Switch, Fibreglass, 1NC/1NO　AZ16ZVRK-M20

IEC/EN60947-5-1, BG-GS-ET-15. BG, UL, CSA

Schmersal

Schmersal TESK-ZS Spare Hinge, For Use With TESK Hinge Switches　TESK-ZS

Schmersal

Schmersal AZ/AZM 415-B3 Actuator, For Use With AZ 415 Safety Switch　AZ/AZM 415-B3

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM415), actuator (AZM415) and a safety monitoring module (AES) is used. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included. AZM415, Two Switches in One. Two switches in one enclosure Manual release in the case of power failure - see accessories for M5 release key Power to unlock Adjustable ball latch to 500N Contact Rating of 4 A (230 Vac) IP67

Schmersal

Schmersal AZ15/16-B2 Actuator, For Use With AZ Safety Switch　AZ15/16-B2

IEC/EN60947-5-1, BG-GS-ET-15. BG, UL, CSA. Actuator must be ordered separately, see accessories. AZ16, Standard. Standard, simple machine guard safety switch Housing has 4 entry points - front, rear and 2 at top Not sensitive to dirty conditions by virtue of patented roller system Multiple coding IP67 protection

Schmersal

Schmersal AZ 15/16-B3 Actuator, For Use With AZ Safety Switch　AZ 15/16-B3

IEC/EN60947-5-1, BG-GS-ET-15. BG, UL, CSA. Actuator must be ordered separately, see accessories. AZ16, Standard. Standard, simple machine guard safety switch Housing has 4 entry points - front, rear and 2 at top Not sensitive to dirty conditions by virtue of patented roller system Multiple coding IP67 protection

Schmersal

AZM 190 Solenoid Interlock Switch Power to Unlock 24 V dc　AZM190-02/10RK-24VDC

IEC/EN60947-5-1, BG-GS-ET-19. BG,UL,CSA. Actuator for ; 617-5116 617-5116 and ; 617-5093 617-5093 is not supplied and must be ordered separately. AZM190, Emergency or Manual Release. 30N latching force Manual release in the case of power failure (stock numbers ; 617-5116 617-5116 and ; 617-5093 617-5093 ) (M3 release key available separately - stock no. ; 362-2849 362-2849 ) Emergency release versions - (stock numbers ; 362-2596 362-2596 and ; 362-2619 362-2619 ) mount only in the guarded area Power to unlock Actuating head can be fitted in 4 positions (90° steps)

Schmersal

Schmersal AZM 161-B1 Actuator, For Use With AZM 161 Safety Switch　AZM 161-B1

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk since the guarding device can immediately be opened in the event of failure of electrical power supply or when the main switch is opened. AZM161, Manual Release. Double insulated thermoplastic enclosures with screw terminals and 6 contacts Manual release in the case of power failure - see accessories for M5 release key Actuating play 5.5mm in direction of actuation 30N latching force

Schmersal

Schmersal AZM 161-B1E Actuator, For Use With AZM 161 Safety Switch　AZM 161-B1E

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk since the guarding device can immediately be opened in the event of failure of electrical power supply or when the main switch is opened. AZM161, Manual Release. Double insulated thermoplastic enclosures with screw terminals and 6 contacts Manual release in the case of power failure - see accessories for M5 release key Actuating play 5.5mm in direction of actuation 30N latching force

Schmersal

Schmersal AZM 161-B6 Actuator, For Use With AZM 161 Safety Switch　AZM 161-B6

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk since the guarding device can immediately be opened in the event of failure of electrical power supply or when the main switch is opened. AZM161, Manual Release. Double insulated thermoplastic enclosures with screw terminals and 6 contacts Manual release in the case of power failure - see accessories for M5 release key Actuating play 5.5mm in direction of actuation 30N latching force

Schmersal

Schmersal ADDITIONAL HINGE Z 400 Hinge, For Use With TVS400 Switch　ADDITIONAL HINGE Z 400

TES/S Spare Hinge. Aluminium Width71 mm Height 92 mm Weight 160 g Suitable for mounting to 40 mm profiles

Schmersal

3 Way Connector & Terminal Block, Screw Down, 8A, 250 V, White　ELDE.N WS 24

Contact and light elements, hygiene-compliant. Contact element. 2-pin. LED light element. Suitable for NDL illuminated buttons. Light element with Ba9S socket. Suitable for NME / NMEF indicator lamps

Schmersal

3 Way Connector & Terminal Block, Screw Down, 8A, 250 V, Green　ELDE.N GN 24

Contact and light elements, hygiene-compliant. Contact element. 2-pin. LED light element. Suitable for NDL illuminated buttons. Light element with Ba9S socket. Suitable for NME / NMEF indicator lamps

Schmersal

Schmersal Indicator　118 1183

Contact and light elements, hygiene-compliant
Contact element

Schmersal

AZM 161 Solenoid Interlock Switch Power to Unlock 24 V ac/dc　AZM 161SK-12/12RK-024

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk since the guarding device can immediately be opened in the event of failure of electrical power supply or when the main switch is opened. AZM161, Manual Release. Double insulated thermoplastic enclosures with screw terminals and 6 contacts Manual release in the case of power failure - see accessories for M5 release key Actuating play 5.5mm in direction of actuation 30N latching force

Schmersal

AZM 161 Solenoid Interlock Switch Power to Lock 24 V ac/dc　AZM 161SK-12/12RKA-024

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk since the guarding device can immediately be opened in the event of failure of electrical power supply or when the main switch is opened. AZM161, Manual Release. Double insulated thermoplastic enclosures with screw terminals and 6 contacts Manual release in the case of power failure - see accessories for M5 release key Actuating play 5.5mm in direction of actuation 30N latching force

Schmersal

AZM 190 Solenoid Interlock Switch Power to Unlock 24 V dc　AZM190-02/01RK-24VDC

IEC/EN60947-5-1, BG-GS-ET-19. BG,UL,CSA. Actuator for ; 617-5116 617-5116 and ; 617-5093 617-5093 is not supplied and must be ordered separately. AZM190, Emergency or Manual Release. 30N latching force Manual release in the case of power failure (stock numbers ; 617-5116 617-5116 and ; 617-5093 617-5093 ) (M3 release key available separately - stock no. ; 362-2849 362-2849 ) Emergency release versions - (stock numbers ; 362-2596 362-2596 and ; 362-2619 362-2619 ) mount only in the guarded area Power to unlock Actuating head can be fitted in 4 positions (90° steps)

Schmersal

AZM 415 Solenoid Interlock Switch Power to Unlock 24 V ac/dc　AZM415-11/11 ZPKE 24VAC/DC-M20

EN60947-5-1 standard is only met if entire system consisting of safety sensor (AZM415), actuator (AZM415) and a safety monitoring module (AES) is used. IEC/EN60947-5-1, BG-GS-ET-19. BG, UL, CSA. Actuating key not included. AZM415, Two Switches in One. Two switches in one enclosure Manual release in the case of power failure - see accessories for M5 release key Power to unlock Adjustable ball latch to 500N Contact Rating of 4 A (230 Vac) IP67

Schmersal

BNS303 Magnetic Safety Switch, Plastic, 24 V dc　BNS 303-11ZG 2,0M

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS303), magnet (BPS) and a safety monitoring module (AES) is used.. IEC/EN60947-5-3, BG-GS-ET-14, EN1088. BG, UL, CSA. Actuating magnet not included. BNS 303, Coded, Barrel. Control category up to 3 to EN954-1 Output function indicated at rear of switch by LED IP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm

Schmersal

BNS303 Magnetic Safety Switch, Plastic, 24 V dc　BNS 303-11ZG-ST

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS303), magnet (BPS) and a safety monitoring module (AES) is used.. IEC/EN60947-5-3, BG-GS-ET-14, EN1088. BG, UL, CSA. Actuating magnet not included. BNS 303, Coded, Barrel. Control category up to 3 to EN954-1 Output function indicated at rear of switch by LED IP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm

Schmersal

BNS303 Magnetic Safety Switch, Plastic, 24 V dc　BNS 303-12ZG 2,0M

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS303), magnet (BPS) and a safety monitoring module (AES) is used.. IEC/EN60947-5-3, BG-GS-ET-14, EN1088. BG, UL, CSA. Actuating magnet not included. BNS 303, Coded, Barrel. Control category up to 3 to EN954-1 Output function indicated at rear of switch by LED IP67 protection Suitable for food industry if using BPS303 magnet Dimensions: L 44mm x W 45mm

Schmersal

BNS260 Magnetic Safety Switch, Plastic, 24 V dc　BNS 260-11/01ZG-ST-L

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS260), magnet (BPS260) and a safety monitoring module (AES) is used. IEC/EN60947-5-3, BG-GS-ET-14. Actuating magnet not included, see accessories, for example ; 617-5374 617-5374 // ; 617-5380 617-5380. BNS 260, Miniature Coded. Smallest design Actuation only possible with BPS260, available separately Left-hand or right-hand side versions for door-mounting Control category up to 4 to EN954-1 IP67 protection Connector 8 mm, 6-pole, latching interlocking Dimensions: L13 x W26 x H36 mm