CIF

AR236, PVC Etching Tray in Green, 400mm Length by 300mm Width　AR236

Colours vary according to your order. PVC Tray - Plastic clamp. Ideal for developing activities Plastic clamp for film and circuits. PVC trays available in various sizes.

CIF

ABB20, Double Sided Photoresist Board FR4 35μm Copper Thick, 300 x 200 x 0.8mm　ABB20

UL, CSA (K130 and above). Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt. Pre-Sensitised Boards 35μm or 70μm. Complies with military standard P 13949F M12 13949F. Professional quality boards with blue coloured positive resin Fire resistance: UL 94-V0 Board material Glass-Epoxy FR4

CIF

AR19.5, Etch Resist Ink Pen　AR19.5

Etch Resist Ink Pen. This pen is filled with an etch resist ink and simplifies the marking of clad boards Allow ink to dry for 15 min After etching, the ink may be removed with Cleaning Fluid or PCB scrub block

CIF

SMD Soldering Exercise Board Epoxy Glass Double-Sided FR4　AL435

Test Boards for SMD Components. Circuit boards for SMD components; CU on both sides. Area of pads 1mm square 1.27mm pitch 0.35mm through holes

CIF

DW10.5, Carbide PCB Drill Bit 0.1mm　DW10.5

CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage

CIF

DU68, Carbide PCB Drill Bit 0.8mm　DU68

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU68.10, Carbide PCB Drill Bit 0.8mm　DU68.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU70.10, Carbide PCB Drill Bit 1mm　DU70.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU85.10, Carbide PCB Drill Bit 2.5mm　DU85.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

EP116, Drilling Plywood Board　EP116

Compatible with CAD and CAM software packages, also accepts HPGL, ISO, EXCELLON, GERBER, GCODE, DXF files. Technodrill drilling / milling machine. The Technodrill machine etches, drills and mills plastic, metal and aluminium parts, and printed circuit boards. Like a CNC machine, it can shape parts regardless of the source of the drawing. Two versions available: an industrial version and a teaching version allowing configuration of multiple installations which can be used on a network. Immediate familiarisation. Multi-purpose: drilling, milling, trimming. Compatible with all file types. Extremely accurate axis guidance. True 3-axis system. Micro-step control, avoids mechanical resonance. GALAAD 3 control software (with free updates). Integrated electronics, 32-bit microprocessor. Tool sensor (removable for XL version) Safety: mechanical and software limiting

CIF

AL436, Double Sided DIN 41612 C Eurocard FR4 With 40 x 60 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm　AL436

Test Boards for SMD Components. Circuit boards for SMD components; CU on both sides. Area of pads 1mm square 1.27mm pitch 0.35mm through holes

CIF

BG9.S, Rivet PCB Rivet for 1.3mm Diameter, 3mm Length　BG9.S

Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets

CIF

BG10.S, Rivet PCB Rivet for 1.8mm Diameter, 3mm Length　BG10.S

Rivets and Insertion Tool. 3mm long rivets for double-sided metallised circuits Tool designed for fast on-demand insertion ( ; 160-3694 160-3694 ) Supplied in boxes of 100 rivets

CIF

Carbide PCB Drill Bit 3.17mm　DU201

CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good quality lines and avoid breakage

CIF

DU66, Carbide PCB Drill Bit 0.6mm　DU66

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU69, Carbide PCB Drill Bit 0.9mm　DU69

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU67, Carbide PCB Drill Bit 0.7mm　DU67

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU71, Carbide PCB Drill Bit 1.1mm　DU71

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU72, Carbide PCB Drill Bit 1.2mm　DU72

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU75, Carbide PCB Drill Bit 1.5mm　DU75

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU74, Carbide PCB Drill Bit 1.4mm　DU74

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU80, Carbide PCB Drill Bit 2mm　DU80

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU85, Carbide PCB Drill Bit 2.5mm　DU85

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF

DU71.10, Carbide PCB Drill Bit 1.1mm　DU71.10

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage.

CIF