Adaptive

Peltier Module, 8A　APHC-161-12-08-S

Adaptive

Peltier Module, 10.5W, 8.5A, 2.1V, 15 x 15mm　ET-017-14-11-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 5.1W, 2.2A, 3.8V, 13 x 13mm　ET-031-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 72W, 13.1A, 8.8V, 40 x 40mm　ET-071-20-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 20.9W, 2.2A, 15.7V, 25 x 25mm　ET-127-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 82.1W, 8.4A, 15.7V, 40 x 40mm　ET-127-14-11-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 59.4W, 6A, 15.7V, 40 x 40mm　ET-127-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 71.8W, 3.9A, 29.8V, 40 x 40mm　ET-241-10-13-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 32.8W, 6A, 8.8V, 30 x 30mm　ETH-071-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 58.6W, 6A, 15.7V, 40 x 40mm　ETH-127-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 58.6W, 6A, 15.7V, 40 x 40mm　ETH-127-14-15-S-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 45.8W, 8.5A, 8.8V, 30 x 30mm　ETC-071-14-11-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 182.6W, 8.5A, 35.8V, 52 x 52mm　ETC-288-14-11-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 151.4W, 15.4A, 15.8V, 40 x 40mm　ETC-128-14-06-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 62.3W, 5A, 20V, 40 x 40mm　ET-161-12-14-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 54.6W, 4.4A, 20V, 40 x 40mm　ET-161-12-16-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 37.3W, 2A, 30V, 40 x 40mm　ET-241-10-25-E

Peltier Effect Thermoelectric Module

Adaptive

12 V dc Air Source Heat Pump, 23.8W　AR-AR-024-12

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

12 V dc Air Source Heat Pump, 39.6W　AR-AR-040-12

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

24 V dc Air Source Heat Pump, 59.3W　AR-AR-060-24

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

13.6W Direct to Air Heat Pump, 12 V dc　DT-AR-014-12

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

20.4W Direct to Air Heat Pump, 12 V dc　DT-AR-020-12

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

24 V dc Air Source Heat Pump, 101.5W　AR-AR-100-24

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

Peltier Module　GM300-126-11-12-C

Peltier Module

Adaptive

Peltier Module, 4.5A　APHC-161-12-15-S

Adaptive

Peltier Module, 15 x 15mm　ET-031-10-13-H1

Adaptive

Peltier Module, 25 x 13mm　ET-063-08-15-H1

Adaptive

Peltier Module, 30 x 15mm　ET-063-10-13-H1

Adaptive

Peltier Module, 30 x 15mm　ET-063-10-13-S-H1

Adaptive

Peltier Module, 30 x 30mm　ET-127-10-13-H1

Adaptive

Peltier Module　ETH-127-14-11-S-H1

Peltier Module

Adaptive

Peltier Module, 8.6W, 3.9A, 3.8V, 15 x 15mm　ET-031-10-13-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 78.7W, 8A, 15.7V, 55 x 55mm　ET-127-20-25-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 85.6W, 3.9A, 35.5V, 40 x 40mm　ET-287-10-13-E

Peltier Effect Thermoelectric Module

Adaptive

34W Direct to Air Heat Pump, 12 V dc　DT-AR-034-12

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

74.5W Direct to Air Heat Pump, 24 V dc　DT-AR-075-24

Adaptive Thermoelectric Cooling Assembly - Peltier Effect Heat Pump. Adaptive thermoelectric cooling assemblies are compact devices that can be used to cool down objects through convection (air-to-air) or conduction (direct-to-air). Reliable, compact design Intricate control over temperature DC operation High Coefficient of Performance (COP). With air-to-air assemblies, heat is pumped from one side of the thermoelectric assembly (i.e. cold side) by Peltier thermoelectric modules and dissipated from the other side of the assembly (i.e. hot side) to the environment through the use of bespoke heat sinks and highly efficient DC fans. With direct-to-air assemblies, the objects to be cooled down are mounted onto the metallic plate at the 'cold side' of the assembly from where heat is pumped by Peltier thermoelectric modules and dissipated to the environment through the use of bespoke heat sinks and highly efficient DC fans at the hot side.

Adaptive

Adaptive Energy Harvesting Kit　ADEH-K-A

Adaptive

Adaptive EH Board　ADEH-P-B

Adaptive

Peltier Module, 0.42W, 600mA, 1.4V, 11.2 x 11.2mm　MGM250-17-10-16

Adaptive

Peltier Module, 0.76W, 600mA, 2.5V, 15 x 15mm　MGM250-31-10-16