Adaptive

Servo / PWM Controller　ADC-48-450-U

European Thermodynamics - Adaptive® CyCLO Thermoelectric Controller. From European Thermodynamics, the Adaptive® CyCLO servo controlled pulse width modulator (PWM). This temperature controller has been designed for heating and cooling thermoelectric assemblies requiring a reliable bidirectional drive source for accurate temperature control. The Adaptive® CyCLO features an NTC 10 k sensor input and 2 independent hot and cold side fan outputs. Compatible with 2 wire fans with 11 V to 48 V dc voltage range supporting a wide variety of applications. The Adaptive® CyLCO can operate as a standalone module. Likewise the controller is easily configured with simple PC software via USB 2.0 communication interface. (See technical data sheets for link to compatible software). Features and Benefits. High efficiency load driver Manual set point for quick installation NTC 10 k sensor input. USB 2.0 communication interface Hot and cold side fan outputs Visual feedback Heating/cooling/alarm. Applications. Fans and thermal management Electronic heating and cooling Industrial automation

Adaptive

Peltier Module, 1.3W, 2.2A, 0.9V, 6 x 6mm　ET-007-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 1.6W, 3.2A, 0.9V, 8 x 8mm　ET-007-10-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 0.7W, 800mA, 1.4V, 6 x 4mm　ET-011-05-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 5.8W, 2.5A, 3.8V, 15 x 15mm　ET-031-10-20-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 14.7W, 6A, 3.9V, 55 x 44mm　ET-032-14-15-RH-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 10.4W, 2.2A, 7.6V, 12 x 25mm　ET-063-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 11.7W, 2.2A, 8.8V, 18 x 18mm　ET-071-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 21.2W, 3.9A, 8.8V, 20 x 20mm　ET-071-10-13-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 128.7W, 13.1A, 15.7V, 55 x 55mm　ET-127-20-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 36.3W, 3.9A, 16V, 40 x 23mm　ET-131-10-13-S-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 16.2W, 2.8A, 15.7V, 30 x 30mm　ET-190-1010-1212-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 112.7W, 6A, 29.8V, 55 x 55mm　ET-241-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 37.9W, 3.9A, 15.7V, 30 x 30mm　ETH-127-10-13-S-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 82.2W, 8.4A, 15.7V, 40 x 40mm　ETH-127-14-11-S-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 20W, 8.5A, 3.8V, 20 x 20mm　ETC-031-14-11-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 236.5W, 15.4A, 25V, 40 x 40mm　ETC-200-14-06-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 88.2W, 9A, 15.8V, 30 x 30mm　ETC-128-10-05-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 198.4W, 9A, 35.8V, 40 x 40mm　ETC-288-10-05-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 235.5W, 24A, 15.8V, 55 x 55mm　ETC-128-20-08-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 83.9W, 6.7A, 20V, 40 x 40mm　ET-161-12-10-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 340.5W, 15.4A, 35.8V, 52 x 52mm　ETC-288-14-06-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 100W, 8.5A, 20V, 40 x 40mm　ET-161-12-08-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 94.3W, 6A, 24.6V, 40 x 40mm　ET-199-14-15-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 0.8W, 1.5A, 0.9V, 4 x 4mm　ET-007-06-11

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 8A　APHC-161-12-08-S

Adaptive

Peltier Module, 10.5W, 8.5A, 2.1V, 15 x 15mm　ET-017-14-11-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 5.1W, 2.2A, 3.8V, 13 x 13mm　ET-031-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 72W, 13.1A, 8.8V, 40 x 40mm　ET-071-20-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 20.9W, 2.2A, 15.7V, 25 x 25mm　ET-127-08-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 82.1W, 8.4A, 15.7V, 40 x 40mm　ET-127-14-11-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 59.4W, 6A, 15.7V, 40 x 40mm　ET-127-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 71.8W, 3.9A, 29.8V, 40 x 40mm　ET-241-10-13-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 32.8W, 6A, 8.8V, 30 x 30mm　ETH-071-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 58.6W, 6A, 15.7V, 40 x 40mm　ETH-127-14-15-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 58.6W, 6A, 15.7V, 40 x 40mm　ETH-127-14-15-S-RS

Thermoelectric Cooler Modules, Adaptive. The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied. Effective cooling power from mW to a hundred of Watts Up to 150˚C continuous operation Modules can be bonded using heat sink bonder Applications in refrigeration and power generation Silicone sealed options

Adaptive

Peltier Module, 45.8W, 8.5A, 8.8V, 30 x 30mm　ETC-071-14-11-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 182.6W, 8.5A, 35.8V, 52 x 52mm　ETC-288-14-11-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 151.4W, 15.4A, 15.8V, 40 x 40mm　ETC-128-14-06-E

Peltier Effect Thermoelectric Module

Adaptive

Peltier Module, 62.3W, 5A, 20V, 40 x 40mm　ET-161-12-14-E

Peltier Effect Thermoelectric Module