[SEGGER] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
SEGGER J-Link PLUS Debugging Emulator for use with Flash microcontrollers J-Link PLUS
USB cable, 20-pin ribbon cable. J-Link PLUS Probe. J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash. Supported Processors. ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N. Features. Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications Remote Server included. Allows using J-Link remotely via TCP/IP GDB Server included Supports J-Flash Production Flash programming Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface DLL available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Software Developer Kit (SDK) available Free software updates, 1 year of support. Target Adapters ; Adapter Cables. 131-1325 131-1325 J-Link Target Power Supply Adapter. 131-1326 131-1326 J-Link 10-pin Needle Adapter. 131-1327 131-1327 J-Link RX100/200/600 MCU Adapter. 131-1328 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter. 131-1329 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter. 131-1330 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter. 131-1331 131-1331 J-Link Microchip PIC32 MCU Adapter. Link Isolator Boards. 131-1335 131-1335 J-Link ARM JTAG Isolator Board. 131-1336 131-1336 J-Link ARM SWD Isolator Board. 131-1337 131-1337 J-Link USB Isolator Board
1 products found
JPY: 168,000
USD: 1,045.30
-
SEGGER J-Link Target Supply adapter Adapter for use with J-Link Probes J-Link Target Supply adapter
J-Link Target Supply Adapter. The J-Link Target Supply Adapter provides an adjustable power supply to a target board. Compatible Probes. J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM. Features. MCP1826T LDO voltage regulator Input from J-Link probe via 20-pin 0.1in socket Output to Target via 20-pin 0.1in header Default output: +3.3V @ 400mA Output voltage adjustable from +1.0V @ 150mA to +3.6V @ 400mA by changing resistor Power On LED
1 products found
JPY: 19,000
USD: 118.22
-
SEGGER J-Link RX Adapter Adapter for use with J-Link Probes J-Link RX Adapter
J-Link RX Adapter. The J-Link RX Adapter maps from the J-Link 20-pin 0.1in connector to the 14-pin 0.1in Renesas connector and allows JTAG + FINE connections to Renesas RX family microcontroller devices. Supported Processors. Connect via FINE: RX111/RX210/RX21A/RX220 Connect via JTAG: RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T. Features. LF33CDT +3.3V @ 500mA LDO voltage regulator JTAG/FINE select link Input from J-Link probe via 20-pin 0.1in socket Output to Target via RSK 14-pin header
1 products found
JPY: 49,700
USD: 309.23
-
SEGGER 8.06.00 J-Link 19-Pin Cortex M Adapter Adapter for use with J-Link Probes 8.06.00
J-Link 19-Pin Cortex-M Adapter. The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems. Supported Probes. J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable. Features. Input from J-Link probe via 20-pin 0.1in socket Output to Target via 19-pin 0.05in Samtec FTSH connector TRST can be connected to pin 9 of the Cortex-M adapter if required
1 products found
JPY: 18,400
USD: 114.49
-
SEGGER 8.06.02 J-Link 9-Pin Cortex M Adapter Adapter for use with J-Link Probes 8.06.02
J-Link 9-Pin Cortex-M Adapter. The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems. Supported Probes. J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable. Features. Input from J-Link probe via 20-pin 0.1in socket Output to Target via 9-pin 0.05in Samtec FTSH connector TRST can be connected to pin 9 of the Cortex-M adapter if required
1 products found
JPY: 8,910
USD: 55.44
-
［Discontinued］SEGGER J-Link EDU Debugging Emulator for use with Flash microcontrollers J-Link EDU
USB cable, 20-pin ribbon cable. J-Link EDU may only be used for non-commercial purposes. J-Link EDU. J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Supported Processors. ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N. Features. Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports concurrent access to CPU by multiple applications GDB Server included: allows using J-Link remotely via TCP/IP Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Support via the SEGGER on-line forum: forum.segger.com. Target Adapters ; Adapter Cables. 131-1325 131-1325 J-Link Target Power Supply Adapter. 131-1326 131-1326 J-Link 10-pin Needle Adapter. 131-1327 131-1327 J-Link RX100/200/600 MCU Adapter. 131-1328 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter. 131-1329 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter. 131-1330 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter. 131-1331 131-1331 J-Link Microchip PIC32 MCU Adapter. Link Isolator Boards. 131-1335 131-1335 J-Link ARM JTAG Isolator Board. 131-1336 131-1336 J-Link ARM SWD Isolator Board. 131-1337 131-1337 J-Link USB Isolator Board
1 products found
JPY: 9,160
USD: 56.99
