[Gems Sensors] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Gems Sensors RotorFlow Flow Indicator, 2 L/min → 20 L/min, RFI Series 142541BSPP
RFI Type Visual Flow Indicator. RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits. Bright visual flow confirmation. Flow ranges from 0.38 LPM to 227 LPM. Removable lens for quick cleanout. Available in brass, stainless steel or high performance plastic housings. Product Application Information. Visual flow confirmation on heat exchangers. Plastic injection moulding equipment
1 products found
JPY: 64,500
USD: 401.32
-
Flow Switch Gems Sensors FS-3 166701
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 17,100
USD: 106.40
-
Flow Switch Gems Sensors FS-3 166702
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 17,600
USD: 109.51
-
Gems Sensors RotorFlow Flow Indicator, 15 L/min → 75 L/min, RFI Series 142542BSPP
RFI Type Visual Flow Indicator. RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits. Bright visual flow confirmation. Flow ranges from 0.38 LPM to 227 LPM. Removable lens for quick cleanout. Available in brass, stainless steel or high performance plastic housings. Product Application Information. Visual flow confirmation on heat exchangers. Plastic injection moulding equipment
1 products found
JPY: 46,900
USD: 291.81
-
Gems Sensors Turbine Flow Sensor, 1 L/min → 10 L/min, FT-110 Series 173037-C
FT-110 Series Turbine Flow Sensor. Gems™ hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Turbine technology does not react to changes in the system pressure caused by ageing filters, unlike timing systems. The sensors standard power and output specifications make it easy to retrofit to existing controllers. Features and Benefits. Low Flow Rates of 0.5 L/min to 30 L/min. Accuracy ±3% of Reading. Mounts in Any Orientation. With cable
1 products found
JPY: 35,100
USD: 218.39
-
Gems Sensors Turbine Flow Sensor, 1 L/min → 15 L/min, FT-110 Series 173939-C
FT-110 Series Turbine Flow Sensor. Gems™ hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Turbine technology does not react to changes in the system pressure caused by ageing filters, unlike timing systems. The sensors standard power and output specifications make it easy to retrofit to existing controllers. Features and Benefits. Low Flow Rates of 0.5 L/min to 30 L/min. Accuracy ±3% of Reading. Mounts in Any Orientation. With cable
1 products found
JPY: 29,900
USD: 186.04
-
Gems Sensors Gauge for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 160bar Max Pressure Reading , 8 3100B0160S01B000
plug. Pressure Transmitter - MiniMap (DIN), Series 3000. The 3000 Series Pressure Sensor is ideal for OEM ‘s that require consistent high levels of performance reliability and stability. Offering you stainless steel wetted parts, a variety of electrical and pressure connections, and wide choice of electrical outputs allowing stock configurations suitable for most applications without modification. The sensors sputter element provides exceptional temperature specifications. Features ; Benefits. Offers reliability and performance to a high standard Sputtered thin film unit Stainless steel wetted parts Various electrical and pressure connections Compact RoHS compliant Recalibration not required No internal ‘O ‘ ring seals 3 x FS proof pressure IP65 Mini DIN 43650C GDS connection. Product Application Information. The 3000 Series pressure sensors are ideal for installation where there is limited space.
1 products found
JPY: 46,900
USD: 291.81
-
Gems Sensors Differential for Air, Non-Conductive Gas Pressure Sensor, 500Pa Max Pressure Reading , 24 V dc 5266500LBHTI
Differential Pressure Transmitter Series 5266. Choice of output types Wetted parts compatible with air or non-conductive gases 6.2mm tube fittings Stainless steel welded sensor 1% full scale accuracy -18°C to +65°C compensated temperature range 1s response time Electrical connection via terminal strip Dimensions: L100xD39xH89mm Note, output is bi-directional.
1 products found
JPY: 61,800
USD: 384.52
-
Gems Sensors Turbine Flow Sensor, 0.026 gal/min → 0.65 gal/min, FT-210 Series 212460E
CE. FT-210 Series Turbine Flow Sensor. Gem's™ FT-210 features proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life. Features and Benefits. Low flow rates 0.1 LPM to 2.5 LPM. Accuracy ±3% of reading. Lightweight turbine ensures fast startup. Mounts in any orientation. Mounting connector supplied
1 products found
JPY: 23,600
USD: 146.84
-
Gems Sensors Piston Flow Switch, 0.25 gal/min, FS-380P Series 197091
FS-380P Series Flow Switch. This rugged inline flow switch offers the same superior performance and resistance to clogging as its metal cousin (FS-380). The fixed set point and simple design make it a dependable switch. The FS-380P is an ideal choice for coolant applications requiring reliable flow detection in HVAC, semiconductor, welding, medical and other industries. 6 mm (") quick disconnect units have a host of snap-on mating fittings sold separately to fit most piping requirements. Features and Benefits. Low-pressure drop design. Flow rate settings: 1 LPM to 8 LPM. Port size: 3/8"" NPT male and "" quick disconnect (QDC) male. Primary construction material: Polypropylene. Setting type: Fixed. Product Application Information. Electronic Equipment: Laser heads, welders, power supplies, high-speed spindles, x-ray tubes, semiconductor equipment. Bearings or Gears: Presses, rotating equipment, conveyors, machine tools, robotics. Processing and Dispensing Equipment: Water purifications and filtering, x-ray film processing, beverage dispensing, chemical additives, gas sampling, distilling
1 products found
JPY: 15,400
USD: 95.82
-
Gems Sensors Air, Hydraulic Pressure Switch, SPDT 65 → 300psi, 125/250 V, BSP 1/4 process connection PS71-30-4MGZ-C-HC
CE, UL Approved units available. PS71 - General Purpose Mini Pressure Switch. These versatile general purpose switches can be used in a wide range of hydraulic and pneumatic applications. Their proven piston/diaphragm design offers outstanding accuracy over a very wide pressure range with an outstanding 6000 psi proof pressure. Gems offers a large number of standard pressure fittings in two materials as well as numerous electrical ratings and terminations. Ranges varying from 10 to 5000 psi (0.7 to 344 bar) - Please check specific pressure range for desired model With snap action microswitches Modular construction This model can be easily configured to meet users needs
1 products found
JPY: 27,500
USD: 171.11
-
Gems Sensors for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 600bar Max Pressure Reading , 10 3100B0600S01E000
Pressure Transmitters - 3100 Series M12 Connections. Gems Sensors 3100 series pressure transmitters offer consistent high levels of performance, reliability and stability in a wide range of compact package sizes. They feature all stainless steel wetted parts and a wide choice of electrical outputs to suit most applications. At the heart of the 3100 series is a sputter element that also provides exceptional temperature specifications. Features and Benefits. High proof pressures. Broad choice of outputs. Operating temperature: -40°C to +120°C. Ideal for installations where space is at a premium. Stainless steel wetted parts. RoHS compliant. IP67 Rated. 0.25% FS accuracy. M12 connections
1 products found
JPY: 22,200
USD: 138.13
-
Gems Sensors Gauge for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 1600bar Max Pressure Reading , 8 3100B1600S2TE000
Pressure Transmitters - 3100 Series M12 Connections. Gems Sensors 3100 series pressure transmitters offer consistent high levels of performance, reliability and stability in a wide range of compact package sizes. They feature all stainless steel wetted parts and a wide choice of electrical outputs to suit most applications. At the heart of the 3100 series is a sputter element that also provides exceptional temperature specifications. Features and Benefits. High proof pressures. Broad choice of outputs. Operating temperature: -40°C to +120°C. Ideal for installations where space is at a premium. Stainless steel wetted parts. RoHS compliant. IP67 Rated. 0.25% FS accuracy. M12 connections
1 products found
JPY: 22,200
USD: 138.13
-
Gems Sensors RotorFlow Flow Indicator, 2 L/min → 20 L/min, RFI Series 155420BSPP
RFI Type Visual Flow Indicator. RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits. Bright visual flow confirmation. Flow ranges from 0.38 LPM to 227 LPM. Removable lens for quick cleanout. Available in brass, stainless steel or high performance plastic housings. Product Application Information. Visual flow confirmation on heat exchangers. Plastic injection moulding equipment
1 products found
JPY: 30,300
USD: 188.53
-
Gems Sensors RotorFlow Flow Indicator, 15 L/min → 75 L/min, RFI Series 155480BSPP
RFI Type Visual Flow Indicator. RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits. Bright visual flow confirmation. Flow ranges from 0.38 LPM to 227 LPM. Removable lens for quick cleanout. Available in brass, stainless steel or high performance plastic housings. Product Application Information. Visual flow confirmation on heat exchangers. Plastic injection moulding equipment
1 products found
JPY: 16,000
USD: 99.55
-
Gems Sensors RotorFlow Electronic Flow Sensor, 15 L/min → 75 L/min, RFO Series 155481BSPP
RFO Type Electronic Flow Sensor. Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio. Features and Benefits. Accurate flow rate indication with integral visual confirmation. 4.5 V dc to 24 V dc pulsed output. Product Application Information. Water purification/Dispensing systems. Chemical metering equipment. Lasers and welders. Water injection systems. Semiconductor processing equipment. Chillers and heat exchangers
1 products found
JPY: 20,800
USD: 129.42
-
Gems Sensors RotorFlow Electronic Flow Sensor, 2 L/min → 20 L/min, RFO Series 156261BSPP
RFO Type Electronic Flow Sensor. Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio. Features and Benefits. Accurate flow rate indication with integral visual confirmation. 4.5 V dc to 24 V dc pulsed output. Product Application Information. Water purification/Dispensing systems. Chemical metering equipment. Lasers and welders. Water injection systems. Semiconductor processing equipment. Chillers and heat exchangers
1 products found
JPY: 41,800
USD: 260.08
-
Gems Sensors RotorFlow Electronic Flow Sensor, 15 L/min → 75 L/min, RFO Series 156262BSPP
RFO Type Electronic Flow Sensor. Gems™ Sensors popularised the RotorFlow® paddle wheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation and an unprecedented price/performance ratio. Features and Benefits. Accurate flow rate indication with integral visual confirmation. 4.5 V dc to 24 V dc pulsed output. Product Application Information. Water purification/Dispensing systems. Chemical metering equipment. Lasers and welders. Water injection systems. Semiconductor processing equipment. Chillers and heat exchangers
1 products found
JPY: 41,800
USD: 260.08
-
Gems Sensors RotorFlow Electronic Flow Sensor, 15 L/min → 75 L/min, RFS Series 155485BSPP
RFS Type Electronic Flow Sensor. RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow® switches to a no-flow condition when the rotor stops for any reason. Features and Benefits. Combines visual confirmation of flow with dynamic, electronic switch operation. Easy, adjustable switch point calibration: a local LED signals when setpoint is reached. Product Application Information. Semiconductor processing equipment. Lasers. Medical equipment. X-Ray and other high-power tubes. Robotic welding equipment
1 products found
JPY: 40,700
USD: 253.24
-
Gems Sensors RotorFlow Electronic Flow Sensor, 2 L/min → 20 L/min, RFS Series 156265BSPP
RFS Type Electronic Flow Sensor. RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow® switches to a no-flow condition when the rotor stops for any reason. Features and Benefits. Combines visual confirmation of flow with dynamic, electronic switch operation. Easy, adjustable switch point calibration: a local LED signals when setpoint is reached. Product Application Information. Semiconductor processing equipment. Lasers. Medical equipment. X-Ray and other high-power tubes. Robotic welding equipment
1 products found
JPY: 51,600
USD: 321.06
-
Gems Sensors RotorFlow Electronic Flow Sensor, 15 L/min → 75 L/min, RFS Series 156268BSPP
RFS Type Electronic Flow Sensor. RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, RotorFlow® switches to a no-flow condition when the rotor stops for any reason. Features and Benefits. Combines visual confirmation of flow with dynamic, electronic switch operation. Easy, adjustable switch point calibration: a local LED signals when setpoint is reached. Product Application Information. Semiconductor processing equipment. Lasers. Medical equipment. X-Ray and other high-power tubes. Robotic welding equipment
1 products found
JPY: 52,800
USD: 328.52
-
Flow Switch Gems Sensors FS-3 166703
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 15,900
USD: 98.93
-
Flow Switch Gems Sensors FS-3 166701-A
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 8,720
USD: 54.26
-
Flow Switch Gems Sensors FS-3 166702-A
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 8,720
USD: 54.26
-
Flow Switch Gems Sensors FS-3 166703-A
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 8,720
USD: 54.26
-
Flow Switch Gems Sensors FS-3 166704-A
50 micron filtration is recommended. FS-3 Series Flow Switch. These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications. Features and Benefits. 0.2 l/min - 3.8 l/min with pre-adjusted set points. Operating pressure: 10 bar at 20°C. Inlet/Outlet ports: 1/4" NPT, R 1/4". Any mounting position. Product Application Information. Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment. Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics. Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling
1 products found
JPY: 8,720
USD: 54.26
-
Brass stem N float metal switch,G1/8 011-1700
The Cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the vertical type the mounting thread and cable entry must be above the highest level of the liquid. Metal Level Switches – Series 1700. IP64 rated Output is SPST that will either be normally closed or normally open depending on the orientation of the float, the position of which can be reversed
1 products found
JPY: 8,580
USD: 53.39
-
Dry sink electro-optic level sensor,M12 169556
CE. Solid State Electro-Optic Level Sensors. Can be mounted in any position as either a high or low level alarm Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence Open collector output Non ESD sensitive Polysulfone wetted parts Flange mount via 19mm hole or Flush mount (M12 x 1mm) Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc Electrical connection via leadwire 22 awg PVC 0.3m
1 products found
JPY: 20,200
USD: 125.68
-
Wet sink electro-optic level sensor,M12 169555
Gem Sensors Level Switch - ELS-1100 Series. Professional range of ELS-1100 Series single-point level switch ‘s from Gems Sensors. These Level Switch units feature various mountings, power requirements and electrical terminations to make it easier to find a perfect match for your application. These polysulfone level switch units are both compact and economical. These ELS-1100 Series Level switch units are suitable for high, low or intermediate level detection in practically any tank top, large or small.
1 products found
JPY: 13,000
USD: 80.89
-
Dry sink electro-optic level sensor 187580
CE. Solid State Electro-Optic Level Sensors. Can be mounted in any position as either a high or low level alarm Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence Open collector output Non ESD sensitive Polysulfone wetted parts Flange mount via 19mm hole or Flush mount (M12 x 1mm) Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc Electrical connection via leadwire 22 awg PVC 0.3m
1 products found
JPY: 12,500
USD: 77.78
-
Wet sink electro-optic level sensor 187585
CE. Solid State Electro-Optic Level Sensors. Can be mounted in any position as either a high or low level alarm Wet or dry sinking models available (N/O or N/C). Wet sinking switches on the presence of liquid, dry on the absence Open collector output Non ESD sensitive Polysulfone wetted parts Flange mount via 19mm hole or Flush mount (M12 x 1mm) Flange-mount versions with Viton seal are suitable for thin-walled tanks, etc Electrical connection via leadwire 22 awg PVC 0.3m
1 products found
JPY: 12,500
USD: 77.78
-
Flow Switch Gems Sensors FS-200E-A 020-3489
FS-200E-A Series Flow Switch. The FS-200E-A flow switch offers accurate flow detection with 1% repeatability and European G1" port size. The durable construction delivers long life repeatability in either water or oil. The design of large flow paths keeps pressure drop low, thus are ideal for detection of flow in high volume lubrication, cooling or process applications. The FS-200E-A series also offers external adjustment. Features and Benefits. Flow Rate Settings: Liquids - 3.0 l/min to 57.0 l/min with adjustable set points. G1"" mounting. Primary Construction Material: Bronze. Setting Type: Adjustable. Product Application Information. Protect Bearings or Gears: oil separators, fuel systems, pumps, compressors, presses. Electronics or Machinery: heat exchangers, semiconductor manufacturing equipment, induction furnaces, radio transmitters. Process Systems: water filtration and reverse osmosis, chlorinates, de-icers, sterilisers, evaporators
1 products found
JPY: 55,800
USD: 347.19
-
Flow Switch Gems Sensors FS-200E-A 020-3490
FS-200E-A Series Flow Switch. The FS-200E-A flow switch offers accurate flow detection with 1% repeatability and European G1" port size. The durable construction delivers long life repeatability in either water or oil. The design of large flow paths keeps pressure drop low, thus are ideal for detection of flow in high volume lubrication, cooling or process applications. The FS-200E-A series also offers external adjustment. Features and Benefits. Flow Rate Settings: Liquids - 3.0 l/min to 57.0 l/min with adjustable set points. G1"" mounting. Primary Construction Material: Bronze. Setting Type: Adjustable. Product Application Information. Protect Bearings or Gears: oil separators, fuel systems, pumps, compressors, presses. Electronics or Machinery: heat exchangers, semiconductor manufacturing equipment, induction furnaces, radio transmitters. Process Systems: water filtration and reverse osmosis, chlorinates, de-icers, sterilisers, evaporators
1 products found
JPY: 101,000
USD: 628.42
-
Flow Switch Gems Sensors FS-550E 020-3499
FS-550E Series Flow Switch. Standard FS-550E switches sense liquid flow in either direction to monitor flow/no flow conditions. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases, the paddle pivots to move out of the liquid path, producing less than 200 MB of pressure drop regardless of pipe size. Features and Benefits. Flow: 15.0 l/min - 125.0 l/min with preadjusted set points. Housing: Brass or stainless steel. Minimum inline restriction; Paddle pivots to move out of liquid path with increasing flow. Operating temperature: 150°C maximum. Product Application Information. Compressors. Heat Exchangers. Turbines. Engine. Boilers. Chillers. Valves. Pumps. Regulators
1 products found
JPY: 126,000
USD: 783.97
-
Flow Switch Gems Sensors FS-550E 020-3497
FS-550E Series Flow Switch. Standard FS-550E switches sense liquid flow in either direction to monitor flow/no flow conditions. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases, the paddle pivots to move out of the liquid path, producing less than 200 MB of pressure drop regardless of pipe size. Features and Benefits. Flow: 15.0 l/min - 125.0 l/min with preadjusted set points. Housing: Brass or stainless steel. Minimum inline restriction; Paddle pivots to move out of liquid path with increasing flow. Operating temperature: 150°C maximum. Product Application Information. Compressors. Heat Exchangers. Turbines. Engine. Boilers. Chillers. Valves. Pumps. Regulators
1 products found
JPY: 99,700
USD: 620.33
-
Gems Sensors Turbine Flow Sensor, 0.5 L/min → 5 L/min, FT-110 Series 173936-C
FT-110 Series Turbine Flow Sensor. Gems™ hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Turbine technology does not react to changes in the system pressure caused by ageing filters, unlike timing systems. The sensors standard power and output specifications make it easy to retrofit to existing controllers. Features and Benefits. Low Flow Rates of 0.5 L/min to 30 L/min. Accuracy ±3% of Reading. Mounts in Any Orientation. With cable
1 products found
JPY: 30,100
USD: 187.28
-
Gems Sensors ATEX Gauge for Fluid, Gas Pressure Sensor, 6bar Max Pressure Reading , 7 → 35 V dc, BSP 1/4, IP65 22ISBGA6000ABUA002
II 1 G EEx ia IIB T4. BAS 01ATEX1125X. Low Cost Hazardous Area Transmitter Series 22IS. Designed for use with aggressive media's found in industrial applications such as Petrochemical, Sewage and Gas pipeline Wetted 17-4 PH stainless steel IP65 0.25% FS accuracy -40 to +100°C range 100 million cycle fatigue life 2 c FS proof pressure, 5 x burst Mating connector supplied No need for maintenance or recalibration
1 products found
JPY: 65,800
USD: 409.41
-
Gems Sensors Gauge for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 10bar Max Pressure Reading , 10 3100B0010G01B000
plug. Pressure Transmitter - MiniMap (DIN), Series 3000. The 3000 Series Pressure Sensor is ideal for OEM ‘s that require consistent high levels of performance reliability and stability. Offering you stainless steel wetted parts, a variety of electrical and pressure connections, and wide choice of electrical outputs allowing stock configurations suitable for most applications without modification. The sensors sputter element provides exceptional temperature specifications. Features ; Benefits. Offers reliability and performance to a high standard Sputtered thin film unit Stainless steel wetted parts Various electrical and pressure connections Compact RoHS compliant Recalibration not required No internal ‘O ‘ ring seals 3 x FS proof pressure IP65 Mini DIN 43650C GDS connection. Product Application Information. The 3000 Series pressure sensors are ideal for installation where there is limited space.
1 products found
JPY: 31,500
USD: 195.99
-
Gems Sensors Gauge for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 16bar Max Pressure Reading , 8 3100B0016G01B000
plug. Pressure Transmitter - MiniMap (DIN), Series 3000. The 3000 Series Pressure Sensor is ideal for OEM ‘s that require consistent high levels of performance reliability and stability. Offering you stainless steel wetted parts, a variety of electrical and pressure connections, and wide choice of electrical outputs allowing stock configurations suitable for most applications without modification. The sensors sputter element provides exceptional temperature specifications. Features ; Benefits. Offers reliability and performance to a high standard Sputtered thin film unit Stainless steel wetted parts Various electrical and pressure connections Compact RoHS compliant Recalibration not required No internal ‘O ‘ ring seals 3 x FS proof pressure IP65 Mini DIN 43650C GDS connection. Product Application Information. The 3000 Series pressure sensors are ideal for installation where there is limited space.
1 products found
JPY: 44,600
USD: 277.50
-
Gems Sensors for Air Fluid, Hydraulic Fluid, Hydraulic Oil, Oil Pressure Sensor, 25bar Max Pressure Reading , 10 3100B0025G01B000
plug. Pressure Transmitter - MiniMap (DIN), Series 3000. The 3000 Series Pressure Sensor is ideal for OEM ‘s that require consistent high levels of performance reliability and stability. Offering you stainless steel wetted parts, a variety of electrical and pressure connections, and wide choice of electrical outputs allowing stock configurations suitable for most applications without modification. The sensors sputter element provides exceptional temperature specifications. Features ; Benefits. Offers reliability and performance to a high standard Sputtered thin film unit Stainless steel wetted parts Various electrical and pressure connections Compact RoHS compliant Recalibration not required No internal ‘O ‘ ring seals 3 x FS proof pressure IP65 Mini DIN 43650C GDS connection. Product Application Information. The 3000 Series pressure sensors are ideal for installation where there is limited space.
1 products found
JPY: 22,100
USD: 137.51
