[Silicon Labs]Amplifiers & Comparators
Filters
-
［Discontinued］SI8261ACA-C-IS Silicon Labs, Isolated Gate Driver, 5 → 30 V, 8-Pin SOIC SI8261ACA-C-IS
Si826x range of Isolated Gate Drivers, Silicon Laboratories. Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate drivers use Silicon Labs proprietary silicon isolation technology which supports up to 5.0 kV RMS. This technology enables higher-performance, reduced variation with temperature and age, tighter part-to-part matching and superior common-mode rejection compared to opto-drivers.
1 products found
JPY: 37,700
USD: 236.48
-
［Discontinued］Si8261ACA-C-IS Silicon Labs, Isolated Gate Driver, 5 → 30 V, 8-Pin SOIC Si8261ACA-C-IS
Si826x range of Isolated Gate Drivers, Silicon Laboratories. Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate drivers use Silicon Labs proprietary silicon isolation technology which supports up to 5.0 kV RMS. This technology enables higher-performance, reduced variation with temperature and age, tighter part-to-part matching and superior common-mode rejection compared to opto-drivers.
1 products found
JPY: 4,770
USD: 29.92
-
［Discontinued］SI8261BAA-C-IS Silicon Labs, Isolated Gate Driver, 5 → 30 V, 8-Pin SOIC SI8261BAA-C-IS
Si826x range of Isolated Gate Drivers, Silicon Laboratories. Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate drivers use Silicon Labs proprietary silicon isolation technology which supports up to 5.0 kV RMS. This technology enables higher-performance, reduced variation with temperature and age, tighter part-to-part matching and superior common-mode rejection compared to opto-drivers.
1 products found
JPY: 20,600
USD: 129.22
-
［Discontinued］Si8261BAA-C-IS Silicon Labs, Isolated Gate Driver, 5 → 30 V, 8-Pin SOIC Si8261BAA-C-IS
Si826x range of Isolated Gate Drivers, Silicon Laboratories. Silicon Labs Si826x range of ISOdrivers are pin-compatible drop-in upgrades for popular gate drive optocouplers. These devices are ideal for driving power MOSFETs and IGBTs used in a wide variety of inverter and motor control applications. The Si826x isolated gate drivers use Silicon Labs proprietary silicon isolation technology which supports up to 5.0 kV RMS. This technology enables higher-performance, reduced variation with temperature and age, tighter part-to-part matching and superior common-mode rejection compared to opto-drivers.
1 products found
JPY: 1,680
USD: 10.54
-
［Discontinued］SI8920AC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP SI8920AC-IP
Si8920 Isolated Amplifier for Current Shunt Measurement. The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system. Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range. High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter. To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor. The Si8920 is available in 4 variants: Si8920AC-IP (RS < 901-3967') 901-3967 with an input range of ±100 mV in a Gull-Wing DIP-8 package Si8920BC-IP (RS < 901-3976') 901-3976 with an input range of ±200 mV in a Gull-Wing DIP-8 package Si8920AD-IS (RS < 901-3979') 901-3979 with an input range of ±100 mV in a SOIC-16 package Si8920BD-IS (RS < 901-3973') 901-3973 with an input range of ±200 mV in a SOIC-16 package
1 products found
JPY: 55,500
USD: 348.14
-
［Discontinued］Si8920AC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP Si8920AC-IP
Si8920 Isolated Amplifier for Current Shunt Measurement. The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system. Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range. High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter. To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor. The Si8920 is available in 4 variants: Si8920AC-IP (RS < 901-3967') 901-3967 with an input range of ±100 mV in a Gull-Wing DIP-8 package Si8920BC-IP (RS < 901-3976') 901-3976 with an input range of ±200 mV in a Gull-Wing DIP-8 package Si8920AD-IS (RS < 901-3979') 901-3979 with an input range of ±100 mV in a SOIC-16 package Si8920BD-IS (RS < 901-3973') 901-3973 with an input range of ±200 mV in a SOIC-16 package
1 products found
JPY: 2,560
USD: 16.06
-
［Discontinued］SI8920BC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP SI8920BC-IP
Si8920 Isolated Amplifier for Current Shunt Measurement. The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system. Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range. High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter. To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor. The Si8920 is available in 4 variants: Si8920AC-IP (RS < 901-3967') 901-3967 with an input range of ±100 mV in a Gull-Wing DIP-8 package Si8920BC-IP (RS < 901-3976') 901-3976 with an input range of ±200 mV in a Gull-Wing DIP-8 package Si8920AD-IS (RS < 901-3979') 901-3979 with an input range of ±100 mV in a SOIC-16 package Si8920BD-IS (RS < 901-3973') 901-3973 with an input range of ±200 mV in a SOIC-16 package
1 products found
JPY: 55,200
USD: 346.26
-
［Discontinued］Si8920BC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP Si8920BC-IP
Si8920 Isolated Amplifier for Current Shunt Measurement. The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system. Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range. High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter. To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor. The Si8920 is available in 4 variants: Si8920AC-IP (RS < 901-3967') 901-3967 with an input range of ±100 mV in a Gull-Wing DIP-8 package Si8920BC-IP (RS < 901-3976') 901-3976 with an input range of ±200 mV in a Gull-Wing DIP-8 package Si8920AD-IS (RS < 901-3979') 901-3979 with an input range of ±100 mV in a SOIC-16 package Si8920BD-IS (RS < 901-3973') 901-3973 with an input range of ±200 mV in a SOIC-16 package
1 products found
JPY: 2,410
USD: 15.12
