BEL POWER SOLUTIONS INC

Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, 24V Output, 1.2A, 28.8W　HB24-1.2-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, -15 V, 15 V Output, 3A, 90W　HCC15-3-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC 80W Quad Output Embedded Switch Mode Power Supply SMPS, 1 A, 5 A, 12 A, ±5/±12V dc Open Frame　MAP110-4000

EN60950-1. MAP110 Series. MAP110 series are low cost power supplies that meet industrial and commercial requirements. Wide dynamic output current and fixed-frequency operation simplifies system level operation. Single output models feature wide-range adjustable outputs to meet a variety of standards and user-specific output voltage requirements. EMI and ESD compliant ensure worldwide acceptance.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Switching Regulator, 29 → 60V dc Input, 24V dc Output, 2.5A　PSA242.5-2G

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC 50W 1 Output Embedded Switch Mode Power Supply SMPS, 2A, 24V dc Enclosed　LM1601-9RG

EN 60950-1, UL 60950-1 Railway EN 50155, EN 50121. 50 Watt Single/Dual output, M Series. The M Series of DC-DC and AC-DC converters represents a broad and flexible range of power supplies for use in advanced industrial electronic systems. This Eurocassette power supply Features high efficiency, reliability, low output voltage noise and excellent dynamic response to load/line changes, due to individual regulation of each output. LED indicators display the status of the converter and allow visual monitoring of the system at any time. The case design allows operation at nominal load up to 71°C in a free-air ambient temperature. If forced cooling is provided, the ambient temperature may exceed 71°C, but the case temperature should remain below 95°C under all conditions. A temperature sensor generates an inhibit signal, which disables the outputs, when the case temperature TC exceeds the limit. The outputs automatically recover, when the temperature drops below the limit. The converters may either be plugged into a 19 inch rack system according to IEC 60927-3 or be mounted onto a chassis or a plate. Extremly wide operating input voltage ranges from 8 to 385 VDC and 85 to 264 VAC, 47 to 440 Hz RoHS lead-solder exemption compliant Class I equipment Input over- and undervoltage lockout 1, 2, or 3 individually isolated and controlled outputs up to 96 V Outputs: SELV, no load, overload, short-circuit proof, rectangular current limiting characteristic Adjustable output voltages with remote on/off Immunity according to IEC/EN 61000-4-2, -3, -4, -5, -6 Emissions according to EN 55011/55022 All PCBs boards coated by protective lacquer Very high reliability Battery charger models available

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Connector for use with Cassette Type Converter　STV-H15-F/CO

Cassette Style Mating Connectors. These connectors have 15 contacts in two vertical columns, designed to meet DIN 41612. Suitable for use with cassette type converters

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Connector Retention Brackets for use with Cassette Type Converter　CRB-HKMS

Connector Retention Bracket Kit for PSUs H/M Series. An alternative to the retention clip is the connector retention bracket. They are attached to the backplate by one screw each with a torque of 20 to 30 Ncm.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Front Panel Kit for use with H Series, M Series　G08-M02

Front Panel Kit for Eurocassette PSUs H/M Series. Front panels are of colourless anodised aluminium and come complete grey plastic handles of 3 TE for,easy pull-out and hand-press insertable plastic retainers with captive screws for fixing to the rack.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Q 100W Isolated DC-DC Converter Rack Mount, Voltage in 14.4 → 36 V dc, Voltage out 5V dc　BQ1001-9R

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series. These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 : Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Q 132W Isolated DC-DC Converter Rack Mount, Voltage in 14.4 → 36 V dc, Voltage out 24V　BQ2660-9RG

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series. These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 : Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Q 120W Isolated DC-DC Converter Rack Mount, Voltage in 14.4 → 36 V dc, Voltage out 12V　BQ2320-9RG

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series. These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 : Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Connector Retention Brackets for use with Cassette Type Converter　CRB-Q

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series. These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 : Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC Q 132W Isolated DC-DC Converter Rack Mount, Voltage in 65 → 150 V dc, Voltage out 24V dc　EQ2660-9R

UL/CSA 60950-1, IEC 60950-1, EN 60950-1 and railway standards EN 50155, EN 50121-3-2, and EN 50121-4. CSA, TUV. Derate power above 50°C MTBF: MIL-HDBK-217F (Ground benign 40°C). 2. Power-One 66 to 132W Railway Standard DC/DC Converter - Q Series. Q series 66 to 132W DC/DC converters suitable for use in railway applications and other rugged environments. The compact, low profile design ( ;20mm)of these DC/DC converters enable them to be used as a modular power supply or part of a distributed power system reducing power supply volume whilst maintaining high reliability. These Q series DC/DC converters incorporate input and output filtering, signaling and protection features along with other benefits including flexible output power, high efficiency, low ripple and RFI noise and full input to output isolation. The inputs of these DC/DC converters are protected against surges and transients occurring on the source lines. The virtually unrestricted series or parallel connection capabilities of all outputs on these DC/DC power supplies enable full system flexibility and n+1 redundant operating mode. When several of these converters are connected in parallel a single wire interconnection provides automatic current sharing. These DC/DC converters have PCB boards that are coated in a protective lacquer and the whole unit is fully enclosed in a black-coated aluminium case that acts as a heatsink and RFI shield. Mounting options for these DC/DC converters include 19" DIN- rack systems where they occupy only 3U/4TE or chassis mounting using 4 screws. An additional heatsink can be fitted. Designed in accordance with railway standards EN 50155 and EN 50121-3-2 Class I equipment Wide input voltage range of up to 150 Vdc 1 or 2 isolated outputs from 3.3 to 48Vdc High efficiency of up to 90% Flexible output power Isolated output Power Good signal and test sockets on front panel Output current and overvoltage and over temperature protection Surge and input transient protection Continuously open and short circuit proof outputs Redundant operation and current sharing Low inrush current, hot swappable Externally adjustable output voltage and inhibit Electric strength test 2.1 kVDC EMC compliance: Class A to EN 55011 and EN 55022

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC HR 240W Isolated DC-DC Converter Rack Mount, Voltage in 16.8 → 150 V dc, Voltage out 12V　HR2320-9RG

IEC/EN 60950-1, UL/CSA 60950-1 2nd Ed. 144W to 288W Railway Standard Isolated DC-DC Converter HR Series. The Power-One HR Series of DC-DC converters offers a range of railway power supplies for use in transportation and other advanced electronic systems. These DC-DC converters feature a wide input voltage, very high efficiency, high reliability, low output voltage noise and excellent dynamic response to load/line changes. The HR series of DC-DC power supplies can be connected to all conventional railway batteries. LED indicators display the status of the DC-DC converter and allow for visual monitoring of the system at any time. The Power supply can be plugged into a 19 inch rack system or be chassis mounted. The DC-DC converters are particularly suitable for railway applications and can be supplied by all common railway batteries. Extremely wide input voltage range from 12 to 168 VDC in the same model RoHS compliant Class I equipment Compliant with EN 50155 and EN 50121-3-2 Input over- and programmable under-voltage lockout Shutdown function Inrush current limitation 10 ms hold-up time Adjustable output voltages 2 independent, isolated outputs: no load, overload, and short-circuit proof Rectangular current limiting characteristic Parallel operation with active current sharing Very high efficiency up to 94% Immunity according to IEC 61000-4-2, -3, -4, -5, -6 ALL PCB boards protected by lacquer Very high reliability

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC 125W Quad Output Embedded Switch Mode Power Supply SMPS, 5 A, 10 A, 15 A, 500 mA, 3.3/5/±12V dc　MPB125-4350G

MPB125/150 Series. MPB125 ; MPB150 series are single and dual output ac-dc power supplies that incorporates high efficiency, high power density and active power factor correction (PFC).Suitable for use in networking, data communications, commercial and industrial applications. These single output models deliver a fully regulated output, rated for convection and forced air cooling. Full output power is available in as few a 5 cubic feet per minute (CFM) forced air cooling. High power density in an industry-standard 3" x 5" footprint Power Factor Correction (PFC) meets EN61000-3-2 CE marked to low voltage directive (Pending) Input transient ; ESD compliance to EN61000-4-2/-3/-4/-5

BEL POWER SOLUTIONS INC

Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, 12V Output, 1.7A, 20.4W　HB12-1.7-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, 24V Output, 2.4A, 57.6W　HC24-2.4-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, -5 V, 5 V, 12 V Output, 2 A, 400 mA, 16W　HTAA-16W-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC RCM150 150W Isolated DC-DC Converter Chassis Mount, Voltage in 50.4 → 137.5 V dc,　110RCM150-12DMQF

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC RCM150 150W Isolated DC-DC Converter Chassis Mount, Voltage in 50.4 → 137.5 V dc,　110RCM150-24DMQF

BEL POWER SOLUTIONS INC

BEL POWER SOLUTIONS INC RCM300 300W Isolated DC-DC Converter Chassis Mount, Voltage in 50.4 → 137.5 V dc,　110RCM300-24DMQF

BEL POWER SOLUTIONS INC

［Discontinued］Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, -5 V, 5 V Output, 1.5A, 15W　HAA5-1.5/OVP-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 55W 1 Output Embedded Switch Mode Power Supply SMPS, 2.5A, 24V dc U Bracket　MAP55-1024

MAP55 Series. MAP55 series are power supplies that meet industrial and commercial requirements. This series have a variable frequency design with thermal efficient U-channel chassis, reliable and tightly regulated dc power. Single output models feature wide-range adjustable outputs to meet a wide variety of standard and user-specific output voltage requirements. Full international safety, EMI, and ESD compliance ensuring worldwide acceptance. Covers for MAP55 series are available separately. Metric and SAE mounting inserts Dual mode connectors All units bear CE mark

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 55W Quad Output Embedded Switch Mode Power Supply SMPS, 2.5 A, 6 A, 500 mA, ±5/±15V dc U Bracket　MAP55-4003

MAP55 Series. MAP55 series are power supplies that meet industrial and commercial requirements. This series have a variable frequency design with thermal efficient U-channel chassis, reliable and tightly regulated dc power. Single output models feature wide-range adjustable outputs to meet a wide variety of standard and user-specific output voltage requirements. Full international safety, EMI, and ESD compliance ensuring worldwide acceptance. Covers for MAP55 series are available separately. Metric and SAE mounting inserts Dual mode connectors All units bear CE mark

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Switching Regulator, 15 → 40V dc Input, 12V dc Output, 3A　PSA123-2

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Switching Regulator, 29 → 60V dc Input, 24V dc Output, 6A　PSB246-2IRG

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Switching Regulator, 7 → 40V dc Input, 5V dc Output, 4A　PSR54-9G

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 150W Quad Output Embedded Switch Mode Power Supply SMPS, 2 A, 3 A, 8 A, 30 A, 5/12V dc U Bracket　MPU150-4000

EN61000-3-2. MPU150 Series. The MPU150 series power supplies are designed to meet 1U height constraints. They incorporate power factor correction (PFC) with a low-profile package, high speed digital circuitry and Power-One ‘s unique dual converter architecture for high reliability with exceptional regulation. These multiple output models feature remote sense on outputs V1 and V2 to provide independent compensation of output cable losses. Remote sense on outputs V1 and V2 Over temperature, overload, and over voltage protection Available with metric or SAE mountings Greater than 340,000 hours

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 40W Triple Output Embedded Switch Mode Power Supply SMPS, 2 A, 3 A, 300 mA, 5/±12V dc Open Frame　MAP40-3000

EN60950-1. MAP30/40/42 Series. MAP30/40/42 series are power supplies that meet industrial and commercial requirements. These power supplies combine low cost and universal input in a board-only power solution. Full international safety, EMI, and ESD compliance ensuring worldwide acceptance. International standard 3.00 x 5.00 foot print, single output models feature wide-range adjustable outputs to meet a variety of standards and user-specific output voltage requirements.

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Switching Regulator, 29 → 60V dc Input, 24V dc Output, 2.5A　PSA242.5-2IRY-G

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Switching Regulator, 7 → 40V dc Input, 5.1V dc Output, 8A　PSB5A8-2IRG

UL 1950, UL 1012, EN60950. Positive Switching Regulators. Wide input voltage range High current output High efficiency Low input to output differential voltage Very good dynamic properties Input undervoltage lock-out Parallel configurations possible Continuous no-load and short-circuit proof No derating

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC SQ24 48W Isolated DC-DC Converter Through Hole, Voltage in 18 → 36 V dc, Voltage out 12V　SQ24T04120-NBA0G

UL 60950, DEMKO certification to EN 60950. UL/cUL recognised. MTBF to Telcordia SR-332. For information on derating and cross regulation please refer to the datasheet on our website. Power-One 26.5W ; 48W Single Output Regulated Isolated DC-DC Converter - SQT Series. These dc to dc convertors offer a high efficiency single output and are low profile being only 60% of the size of industry-standard quarter bricks. Excellent thermal performance is accomplished through the use of patent pending circuit packaging and processing techniques. The preservation of standard pinout and trim equations means that these converters are ideal drop-in replacements for existing quarter brick designs. Eighth-Brick, low profile open frame package bus converter, designed for use in intermediate bus architecture High efficiency single output, no heatsink required Adjustable output voltage via external resistors, +10% / -20% On-board input differential LC-filter Low output and input ripple Start-up into pre-biased output No minimum load required Fixed-frequency operation Input under-voltage lockout, over-current, over-voltage and over-temperature protection Remote output sense Positive or negative logic ON/OFF option Dimensions: 54.4x22.8x8.94 mm Meets basic insulation requirements of EN60950 Meets Class B conducted emissions per FCC and EN55022 when used with an external filter

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC Q 132W Isolated DC-DC Converter Rack Mount, Voltage in 33.6 → 75 V dc, Voltage out 24V　CQ2660-9RG

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series. These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit Dimensions: H111 x W20 x L172 mm Weight: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 : Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC HR 144W Isolated DC-DC Converter Rack Mount, Voltage in 16.8 → 150 V dc, Voltage out 12V　HRL2320-9RG

IEC/EN 60950-1, UL/CSA 60950-1 2nd Ed. 144W to 288W Railway Standard Isolated DC-DC Converter HR Series. The Power-One HR Series of DC-DC converters offers a range of railway power supplies for use in transportation and other advanced electronic systems. These DC-DC converters feature a wide input voltage, very high efficiency, high reliability, low output voltage noise and excellent dynamic response to load/line changes. The HR series of DC-DC power supplies can be connected to all conventional railway batteries. LED indicators display the status of the DC-DC converter and allow for visual monitoring of the system at any time. The Power supply can be plugged into a 19 inch rack system or be chassis mounted. The DC-DC converters are particularly suitable for railway applications and can be supplied by all common railway batteries. Extremely wide input voltage range from 12 to 168 VDC in the same model RoHS compliant Class I equipment Compliant with EN 50155 and EN 50121-3-2 Input over- and programmable under-voltage lockout Shutdown function Inrush current limitation 10 ms hold-up time Adjustable output voltages 2 independent, isolated outputs: no load, overload, and short-circuit proof Rectangular current limiting characteristic Parallel operation with active current sharing Very high efficiency up to 94% Immunity according to IEC 61000-4-2, -3, -4, -5, -6 ALL PCB boards protected by lacquer Very high reliability

BEL POWER SOLUTIONS INC

［Discontinued］Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, -15 V, 15 V Output, 1.5A, 45W　HBB15-1.5-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

［Discontinued］Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, -5 V, 5 V, 12 V Output, 1 A, 6 A, 400 mA, 44W　HCAA-60W-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

［Discontinued］Embedded Linear Power Supply Open Frame, 100 → 264V ac Input, 24V Output, 7.2A, 172.8W　HE24-7.2-AG

Power One H Series Linear Power Supplies. The Power One range of Linear power supplies rugged technology and proven design merge to create quiet, highly-regulated, dependable DC power. The Linear power supplies are available in a range of voltages and offer a high accuracy output regulation.. Wide range of input voltage Low output ripple ±0.05% Output regulation

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 130W 1 Output Embedded Switch Mode Power Supply SMPS, 6.2A, 24V dc U Bracket　MAP130-1024

EN60950-1. MAP130 Series. MAP130 series are low cost single output switching power supplies that meet industrial and commercial requirements. These single and multi output compact power supplies provide regulated outputs with high peak current capabilities.Covers for MAP130 series are available separately. Autoselect AC Input EMI level B filtering Power Fail signal included Thermal shutdown (with warning) Remote sense, over voltage protection, and over temperature protection Metric and SAE

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC 130W Quad Output Embedded Switch Mode Power Supply SMPS, 1 A, 5 A, 20 A, ±5/±12V dc U Bracket　MAP130-4000

EN60950-1. MAP130 Series. MAP130 series are low cost single output switching power supplies that meet industrial and commercial requirements. These single and multi output compact power supplies provide regulated outputs with high peak current capabilities.Covers for MAP130 series are available separately. Autoselect AC Input EMI level B filtering Power Fail signal included Thermal shutdown (with warning) Remote sense, over voltage protection, and over temperature protection Metric and SAE

BEL POWER SOLUTIONS INC

［Discontinued］BEL POWER SOLUTIONS INC RCM500 500W Isolated DC-DC Converter Chassis Mount, Voltage in 77 → 137.5 V dc, Voltage　110RCM500-24DMQF