[Molex Premise Networks] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Molex Premise Networks Angled Cat6 RJ45 Modular Outlet,With FTP Shield Type MGB-00003-02 SINGLE
Wallplate and RJ45 socket modules sold separately. Contura™ Cat6 Modular Wall Outlets. The Contura™ outlet range offers contemporary design, with the flexibility of a modular construction to install as many modules as required. Features the DataGate Plus™ IDC Category 6 shuttered connector Terminations are colour-coded for EIA 568A and 568B Independently tested and verified by ETL for Category 6 component compliance Individual port colour coded facility Protected labelling facility Coloured identification labels Angled design of wall outlets and modules reduces patch cord bend radius
1 products found
JPY: 4,900
USD: 30.72
-
Molex Premise Networks PowerCat Series Cat6 24 Port RJ45 RJ Patch Panel FTP 1U PID-00182
PowerCat 6 Panel. PowerCat 6 patch panels are designed to provide a simple, orderly and efficient means for cross connecting between vertical and horizontal cabling. Features the DataGate Plus™ IDC category 6 shuttered connector Terminations are colour coded for EIA 568A and 568B Independently tested and verified by ETL for Category 6 component compliance Front and rear port labelling facilities Individual port colour coding facility Supplied with an integral rear cable management tray for cable strain relief and neat cable dressing Tie wraps and mounting hardware included
1 products found
JPY: 58,400
USD: 366.08
-
Molex Premise Networks 12 Port Tray 91.A1150
Fusion Splice Tray. A 12 position splice tray which fits neatly into fibre patch panels for the management of incoming fibres. The tray has four cable grips, one in each corner, which will retain incoming cables. There are two 6-way snap-in sleeve holders, which hold fusion splice sleeves.,Fibres are held in loops within the tray providing protection and easy servicing. Assembly instructions included.
1 products found
JPY: 23,200
USD: 145.43
-
Molex Premise Networks ST to ST Multimode Fibre Optic Adapter WFR-00010-02
Molex Fibre Wall Enclosure - 601 Series. 601 series fibre management interface units for splicing and direct termination of ST and SC connections with multi-mode performance. These 601 series fibre management interface units are wall mounting with a lockable hinged front cover and allow access for patching through the top, bottom and rear of the unit. The adaptors are mounted on modules which snap into the unit, the splice holders are designed to accept up to 8 fusion splice protectors or mechanical splices. An accessory kit is supplied with these 601 series fibre management interface units which consists of cable ties, labelling and mounting kits. Stock number ; 362-9418 362-9418 is a 6 port enclosure for 6 ST adapters Stock number ; 362-9424 362-9424 is an 8 port enslosure for 4 SC duplex adapters
1 products found
JPY: 9,610
USD: 60.24
-
Molex Premise Networks Single Mode Fibre Optic Cable 1m 91.LL.872.00100
LC Patchcords. LC connector patch cords developed to meet the growing demand for higher density fibre connectivity Reliable and robust latching mechanism Considerable space savings (up to 50%) achieved on panels and wallplates Available in duplex singlemode form in various lengths Patchcords are 9/125mm with 204mm jacketed cable
1 products found
JPY: 28,500
USD: 178.65
-
Molex Premise Networks Multi Mode Fibre Optic Cable 1m 91.11.372.00100
Higher Bandwidth. Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718. 0.35dB or less insertion loss Enhanced bandwidth capability LSZH sheath, complying with IEC332.1 and 332.3
1 products found
JPY: 11,900
USD: 74.59
-
Molex Premise Networks Multi Mode Fibre Optic Cable 1m 91.19.372.00100
Higher Bandwidth. Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718. 0.35dB or less insertion loss Enhanced bandwidth capability LSZH sheath, complying with IEC332.1 and 332.3
1 products found
JPY: 6,690
USD: 41.94
-
Molex Premise Networks Grey PVC Cat5e Cable U/UTP, 1m Male RJ45/Male RJ45 PCD-01001-0E
PowerCat Cat 5e Patch Leads. PowerCat 'Cat 5E' 4 pair patchcords in a range of colours and lengths Ideal for high speed transmission systems Particularly suited for use with Molex Premise Network cabling. High performance structured wiring components designed to considerably exceed category 5 requirements for use in the following applications. 100Base - T4 Gigabit Ethernet (1000Base - T) 155 Mbps ATM 622 Mbps ATM PowerCat crosstalk in a 4 pair system is measured by adding the sum of the power factors (PowerSum) from three pairs into the fourth pair. Traditional pair to pair measurement does not allow for accumulated crosstalk in multiple pair transmissions Resultant crosstalk performance is considerably better than ordinary category 5 systems. Bandwidth is higher with an improved ACR (attenuation to crosstalk radio) PowerCat Link characteristics ensures excellent performance in high speed applications (see above) PowerCat provides all the basic components needed including panel and patch leads. All are clearly identified with red shutters and markers to differentiate connections Terminations are colour coded for EIA 568B wiring and will accept punch down tool stock no. < 472-6740') 472-6740/ For PowerCat cable see Cables section
1 products found
JPY: 790
USD: 4.95
-
Molex Premise Networks Grey PVC Cat5e Cable U/UTP, 2m Male RJ45/Male RJ45 PCD-01003-0E
PowerCat Cat 5e Patch Leads. PowerCat 'Cat 5E' 4 pair patchcords in a range of colours and lengths Ideal for high speed transmission systems Particularly suited for use with Molex Premise Network cabling. High performance structured wiring components designed to considerably exceed category 5 requirements for use in the following applications. 100Base - T4 Gigabit Ethernet (1000Base - T) 155 Mbps ATM 622 Mbps ATM PowerCat crosstalk in a 4 pair system is measured by adding the sum of the power factors (PowerSum) from three pairs into the fourth pair. Traditional pair to pair measurement does not allow for accumulated crosstalk in multiple pair transmissions Resultant crosstalk performance is considerably better than ordinary category 5 systems. Bandwidth is higher with an improved ACR (attenuation to crosstalk radio) PowerCat Link characteristics ensures excellent performance in high speed applications (see above) PowerCat provides all the basic components needed including panel and patch leads. All are clearly identified with red shutters and markers to differentiate connections Terminations are colour coded for EIA 568B wiring and will accept punch down tool stock no. < 472-6740') 472-6740/ For PowerCat cable see Cables section
1 products found
JPY: 1,240
USD: 7.77
-
Molex Premise Networks Grey PVC Cat5e Cable U/UTP, 7m Male RJ45/Male RJ45 PCD-01013-0E
PowerCat Cat 5e Patch Leads. PowerCat 'Cat 5E' 4 pair patchcords in a range of colours and lengths Ideal for high speed transmission systems Particularly suited for use with Molex Premise Network cabling. High performance structured wiring components designed to considerably exceed category 5 requirements for use in the following applications. 100Base - T4 Gigabit Ethernet (1000Base - T) 155 Mbps ATM 622 Mbps ATM PowerCat crosstalk in a 4 pair system is measured by adding the sum of the power factors (PowerSum) from three pairs into the fourth pair. Traditional pair to pair measurement does not allow for accumulated crosstalk in multiple pair transmissions Resultant crosstalk performance is considerably better than ordinary category 5 systems. Bandwidth is higher with an improved ACR (attenuation to crosstalk radio) PowerCat Link characteristics ensures excellent performance in high speed applications (see above) PowerCat provides all the basic components needed including panel and patch leads. All are clearly identified with red shutters and markers to differentiate connections Terminations are colour coded for EIA 568B wiring and will accept punch down tool stock no. < 472-6740') 472-6740/ For PowerCat cable see Cables section
1 products found
JPY: 5,160
USD: 32.35
-
Molex Premise Networks Grey PVC Cat5e Cable U/UTP, 10m Male RJ45/Male RJ45 PCD-01019-0E
PowerCat Cat 5e Patch Leads. PowerCat 'Cat 5E' 4 pair patchcords in a range of colours and lengths Ideal for high speed transmission systems Particularly suited for use with Molex Premise Network cabling. High performance structured wiring components designed to considerably exceed category 5 requirements for use in the following applications. 100Base - T4 Gigabit Ethernet (1000Base - T) 155 Mbps ATM 622 Mbps ATM PowerCat crosstalk in a 4 pair system is measured by adding the sum of the power factors (PowerSum) from three pairs into the fourth pair. Traditional pair to pair measurement does not allow for accumulated crosstalk in multiple pair transmissions Resultant crosstalk performance is considerably better than ordinary category 5 systems. Bandwidth is higher with an improved ACR (attenuation to crosstalk radio) PowerCat Link characteristics ensures excellent performance in high speed applications (see above) PowerCat provides all the basic components needed including panel and patch leads. All are clearly identified with red shutters and markers to differentiate connections Terminations are colour coded for EIA 568B wiring and will accept punch down tool stock no. < 472-6740') 472-6740/ For PowerCat cable see Cables section
1 products found
JPY: 3,800
USD: 23.82
-
Molex Premise Networks Angled Cat6 RJ45 Modular Outlet,With UTP Shield Type MGB-00001-02 SINGLE
Wallplate and RJ45 socket modules sold separately. Contura™ Cat6 Modular Wall Outlets. The Contura™ outlet range offers contemporary design, with the flexibility of a modular construction to install as many modules as required. Features the DataGate Plus™ IDC Category 6 shuttered connector Terminations are colour-coded for EIA 568A and 568B Independently tested and verified by ETL for Category 6 component compliance Individual port colour coded facility Protected labelling facility Coloured identification labels Angled design of wall outlets and modules reduces patch cord bend radius
1 products found
JPY: 3,900
USD: 24.45
-
Molex Premise Networks Angled Cat6 1 Way RJ45 Face Plate WGB-00001-02 SINGLE
Wallplate and RJ45 socket modules sold separately. Contura™ Cat6 Modular Wall Outlets. The Contura™ outlet range offers contemporary design, with the flexibility of a modular construction to install as many modules as required. Features the DataGate Plus™ IDC Category 6 shuttered connector Terminations are colour-coded for EIA 568A and 568B Independently tested and verified by ETL for Category 6 component compliance Individual port colour coded facility Protected labelling facility Coloured identification labels Angled design of wall outlets and modules reduces patch cord bend radius
1 products found
JPY: 790
USD: 4.95
-
Molex Premise Networks Angled Cat6 2 Way RJ45 Face Plate WGB-00002-02 SINGLE
Wallplate and RJ45 socket modules sold separately. Contura™ Cat6 Modular Wall Outlets. The Contura™ outlet range offers contemporary design, with the flexibility of a modular construction to install as many modules as required. Features the DataGate Plus™ IDC Category 6 shuttered connector Terminations are colour-coded for EIA 568A and 568B Independently tested and verified by ETL for Category 6 component compliance Individual port colour coded facility Protected labelling facility Coloured identification labels Angled design of wall outlets and modules reduces patch cord bend radius
1 products found
JPY: 1,090
USD: 6.83
-
Molex Premise Networks Cat6 1 Way RJ45 Surface Box,With UTP Shield Type SBX-00005-02
Synergy™ Cat6 Surface Boxes. The Synergy™ surface boxes are ideal for use in open office cabling where surface mount is the only option Features the DataGate Plus™ IDC Cat 6 shuttered connector Side and Base cable installation options Terminations are colour-coded for EIA 568A and 568B Individual port colour-coding facility Protected labelling facility
1 products found
JPY: 4,820
USD: 30.21
-
Molex Premise Networks Cat5e 1 Way RJ45 Surface Mount Box,With UTP Shield Type SBX-00006-02
TIA/EIA-568-B.2-1, FCC Subpart F 68.5 ISO 60603-7, ISO 11801:2002, EN 50173:2002 ETL Verified for Category 5E Component Compliance. PowerCat Synergy™ Cat 5E Surface Mount Boxes. PowerCat Synergy™ surface mount boxes for open office cabling made from UL94V-0 polycarbonate with a protected labelling facility and service I.D. icons. These PowerCat Synergy™ 5E surface mount boxes contain a high-speed, shuttered, spring-loaded DataGate 5E RJ45 IDC connector which is dual colour coded for either 568A or 568B wiring schedules and RJ11 compatible.
1 products found
JPY: 1,070
USD: 6.71
-
Molex Premise Networks STP Cat6a Cable 1m, Grey, Male RJ45/Male RJ45 PCD-07000-0E
TIA/EIA-568-B.2-10 ISO/IEC 11801 A1.1 FCC Subpart F 68.5 IEC-603-7. Note: Category 6A performance when installed as a complete PowerCat™t cat6a shielded system. PowerCat™ Cat6a RJ45 Shielded Patch Cords. PowerCat™ cat6a RJ45 shielded patch cords designed for high speed 10-Gigabit Ethernet (10GBASE-T) data networks and suitable for EIA 568A/B wiring applications. These PowerCat™ cat6a RJ45 shielded patch cable assemblies are made from 4 pair 26AWG stranded wire with an aluminium/polyester shield with tinned copper drain wire and a PVC jacket. (stock numbers < 775-4858') 775-4858/, < 775-4852') 775-4852/, < 775-4861') 775-4861/, < 775-4864') 775-4864/, < 775-4868') 775-4868/ and < 775-4877') 775-4877/ have a Low Smoke Zero Halogen LSZH jacket). Each of these PowerCat™ cat6a patch cables are terminated either end with an RJ45 WE8W shielded plug with an overmoulded anti-snag strain relief boot. The maximum electrical ratings for these RJ45 patch cord assemblies is 150Vac, 1.5A @ 25°C.
1 products found
JPY: 2,270
USD: 14.23
-
Molex Premise Networks STP Cat6a Cable 10m, Grey, Male RJ45/Male RJ45 PCD-07009-0E
TIA/EIA-568-B.2-10 ISO/IEC 11801 A1.1 FCC Subpart F 68.5 IEC-603-7. Note: Category 6A performance when installed as a complete PowerCat™t cat6a shielded system. PowerCat™ Cat6a RJ45 Shielded Patch Cords. PowerCat™ cat6a RJ45 shielded patch cords designed for high speed 10-Gigabit Ethernet (10GBASE-T) data networks and suitable for EIA 568A/B wiring applications. These PowerCat™ cat6a RJ45 shielded patch cable assemblies are made from 4 pair 26AWG stranded wire with an aluminium/polyester shield with tinned copper drain wire and a PVC jacket. (stock numbers < 775-4858') 775-4858/, < 775-4852') 775-4852/, < 775-4861') 775-4861/, < 775-4864') 775-4864/, < 775-4868') 775-4868/ and < 775-4877') 775-4877/ have a Low Smoke Zero Halogen LSZH jacket). Each of these PowerCat™ cat6a patch cables are terminated either end with an RJ45 WE8W shielded plug with an overmoulded anti-snag strain relief boot. The maximum electrical ratings for these RJ45 patch cord assemblies is 150Vac, 1.5A @ 25°C.
1 products found
JPY: 8,840
USD: 55.41
-
Molex Premise Networks Grey Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 1m PCD-04001-0E
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 1,740
USD: 10.91
-
Molex Premise Networks Grey Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 3m PCD-04005-0E
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 2,440
USD: 15.30
-
Molex Premise Networks Grey Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 5m PCD-04009-0E
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 4,230
USD: 26.52
-
Molex Premise Networks Grey Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 10m PCD-04019-0E
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 4,900
USD: 30.72
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 1m PCD-04001-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 1,790
USD: 11.22
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 2m PCD-04003-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 2,330
USD: 14.61
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 3m PCD-04005-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 3,430
USD: 21.50
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 5m PCD-04009-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 4,350
USD: 27.27
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 7m PCD-04013-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 3,930
USD: 24.64
-
Molex Premise Networks Yellow Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 10m PCD-04019-0K
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 7,010
USD: 43.94
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 1m PCD-04001-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 1,910
USD: 11.97
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 2m PCD-04003-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 2,060
USD: 12.91
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 3m PCD-04005-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 2,600
USD: 16.30
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 5m PCD-04009-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 3,150
USD: 19.75
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 7m PCD-04013-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 3,970
USD: 24.89
-
Molex Premise Networks Blue Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 10m PCD-04019-0H
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 9,910
USD: 62.12
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 1m PCD-04001-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 1,790
USD: 11.22
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 2m PCD-04003-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 2,060
USD: 12.91
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 3m PCD-04005-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 3,430
USD: 21.50
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 5m PCD-04009-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 4,330
USD: 27.14
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 7m PCD-04013-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 4,650
USD: 29.15
-
Molex Premise Networks Green Cat6 Cable F/UTP LSZH Male RJ45/Male RJ45, 10m PCD-04019-0J
Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class E TIA-568-C.2 Cat. 6, EN50173 Cat.6 Fire Propagation Tests: IEC 60332-1, IEC 61034-2, IEC-60754-1, IEC-60754-2. PowerCat 6 RJ45 Shielded Patch Cords, LS0H. PowerCat 6 RJ45 shielded F/UTP patch cords made from four pair 26 AWG stranded copper wire with an aluminium/polyester shield and a low smoke zero halogen (LS0H) sheath. The nominal outside diameter for these PowerCat 6 RJ45 patch cords is 6.3mm max. These PowerCat 6 RJ45 shielded patch cords are pre-terminated with an RJ45 plug with an anti-snag slip-on strain relief boot and are suitable for EIA 568A or 568B wiring.
1 products found
JPY: 5,490
USD: 34.41
