[EVENTUS] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
EVENTUS 21 Piece M12 HSS Hand Tap Set 10701
Steel Tap Set. Professional comprehensive metric Steel Tap set containing Bottom, Plug or second and Taper Taps for cutting through and blind holes. Supplied packed in a metal carry tin for safe and secure transportation and storage. For cutting screw threads in wood and metal Avaialbe with HSS construction, ideal for metal tapping and durability
1 products found
JPY: 16,700
USD: 103.91
-
EVENTUS HSS M3 Plug Thread Tap, 40 mm Length 10003
ISO HSS Metric (Coarse) Spiral Point Ground Taps. Precision HSS taps for machine tapping Can be used for hand tapping without need of a lead tap. Designed with a straight flute supplemented by an angular cutting point leaves the flutes clear of swarf for free coolant flow. Blue steam tempered finish reduces friction and produces a fine finish thread
1 products found
JPY: 2,920
USD: 18.17
-
EVENTUS HSS M5 Plug Thread Tap, 50 mm Length 10011
ISO HSS Metric (Coarse) Spiral Point Ground Taps. Precision HSS taps for machine tapping Can be used for hand tapping without need of a lead tap. Designed with a straight flute supplemented by an angular cutting point leaves the flutes clear of swarf for free coolant flow. Blue steam tempered finish reduces friction and produces a fine finish thread
1 products found
JPY: 830
USD: 5.16
-
-
EVENTUS HSS M6 Short Machine Thread Tap, 50 mm Length 20004
DIN 352. Individual Single-Cut Tap, Metric. HSS-G single-cut tap with straight flute B format, with 5-pitch spiral point Short version for through holes Profile ground and relief ground, for manual and machine use For metric ISO thread DIN 13, tolerance 6H Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 1,140
USD: 7.09
-
EVENTUS HSS M5 Short Machine Thread Tap, 50 mm Length 20003
DIN 352. Individual Single-Cut Tap, Metric. HSS-G single-cut tap with straight flute B format, with 5-pitch spiral point Short version for through holes Profile ground and relief ground, for manual and machine use For metric ISO thread DIN 13, tolerance 6H Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 1,130
USD: 7.03
-
-
-
EVENTUS HSS PG16 Short Machine Thread Tap 20245
HSS PG European Conduit Taps. Conduit tap designed with an 80° inclusive thread angle to enable threads to be cut on very thin wall sections. High Speed Steel construction Plain shank
1 products found
JPY: 13,100
USD: 81.51
-
EVENTUS HSS PG7 Short Machine Thread Tap 20241
HSS PG European Conduit Taps. Conduit tap designed with an 80° inclusive thread angle to enable threads to be cut on very thin wall sections. High Speed Steel construction Plain shank
1 products found
JPY: 4,510
USD: 28.06
-
EVENTUS HSS-G M3 Spiral Flute Thread Tap, 56 mm Length 10351
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 2,340
USD: 14.56
-
EVENTUS HSS M4 Plug Thread Tap, 45 mm Length 10007
ISO HSS Metric (Coarse) Spiral Point Ground Taps. Precision HSS taps for machine tapping Can be used for hand tapping without need of a lead tap. Designed with a straight flute supplemented by an angular cutting point leaves the flutes clear of swarf for free coolant flow. Blue steam tempered finish reduces friction and produces a fine finish thread
1 products found
JPY: 3,660
USD: 22.77
-
EVENTUS HSS M2 Plug Thread Tap, 36 mm Length 31
ISO HSS Metric (Coarse) Spiral Point Ground Taps. Precision HSS taps for machine tapping Can be used for hand tapping without need of a lead tap. Designed with a straight flute supplemented by an angular cutting point leaves the flutes clear of swarf for free coolant flow. Blue steam tempered finish reduces friction and produces a fine finish thread
1 products found
JPY: 3,160
USD: 19.66
-
EVENTUS HSS M6 Plug Thread Tap, 50 mm Length 10015
ISO HSS Metric (Coarse) Spiral Point Ground Taps. Precision HSS taps for machine tapping Can be used for hand tapping without need of a lead tap. Designed with a straight flute supplemented by an angular cutting point leaves the flutes clear of swarf for free coolant flow. Blue steam tempered finish reduces friction and produces a fine finish thread
1 products found
JPY: 890
USD: 5.54
-
EVENTUS HSS M4 Short Machine Thread Tap, 45 mm Length 20002
DIN 352. Individual Single-Cut Tap, Metric. HSS-G single-cut tap with straight flute B format, with 5-pitch spiral point Short version for through holes Profile ground and relief ground, for manual and machine use For metric ISO thread DIN 13, tolerance 6H Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 1,140
USD: 7.09
-
EVENTUS HSS M3 Short Machine Thread Tap, 40 mm Length 20001
DIN 352. Individual Single-Cut Tap, Metric. HSS-G single-cut tap with straight flute B format, with 5-pitch spiral point Short version for through holes Profile ground and relief ground, for manual and machine use For metric ISO thread DIN 13, tolerance 6H Square stem Tap wrench available under order no. < 508-9389') 508-9389/ ff.
1 products found
JPY: 1,140
USD: 7.09
-
-
-
EVENTUS 16 Piece HSS M3 → M12 Thread Tap & Die Set 10711
Ratchet Tap wrenches are not supplied with RS part no ; 6681129 6681129. Tap ; Die Set. High quality tap and die sets to DIN standard for general engineering use. Metal Case Available in M3 to M12 and M3 to M20 Size Ranges
1 products found
JPY: 30,400
USD: 189.15
-
EVENTUS HSS PG9 Short Machine Thread Tap 20242
HSS PG European Conduit Taps. Conduit tap designed with an 80° inclusive thread angle to enable threads to be cut on very thin wall sections. High Speed Steel construction Plain shank
1 products found
JPY: 5,470
USD: 34.03
-
-
-
EVENTUS HSS-G M4 Spiral Point Thread Tap, 63 mm Length 10302
DIN 371, DIN 376. Machine Tap, Straight Flute, Through Holes. HSS-G machine tap with straight flute, profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H B format, with 5-pitch spiral point, for through holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 1,800
USD: 11.20
-
EVENTUS HSS-G M3 Spiral Point Thread Tap, 56 mm Length 10301
DIN 371, DIN 376. Machine Tap, Straight Flute, Through Holes. HSS-G machine tap with straight flute, profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H B format, with 5-pitch spiral point, for through holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 1,780
USD: 11.08
-
EVENTUS HSS G1/8-28 Short Machine Thread Tap, 63 mm Length 20181
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 2,130
USD: 13.25
-
EVENTUS HSS G1/4-19 Short Machine Thread Tap, 70 mm Length 20182
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 2,270
USD: 14.12
-
EVENTUS HSS G3/8-19 Short Machine Thread Tap, 70 mm Length 20183
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 3,750
USD: 23.33
-
EVENTUS HSS G1/2-14 Short Machine Thread Tap, 80 mm Length 20184
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 5,020
USD: 31.23
-
EVENTUS HSS G3/4-14 Short Machine Thread Tap, 90 mm Length 20185
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 6,910
USD: 42.99
-
EVENTUS HSS G1-11 Short Machine Thread Tap, 100 mm Length 20186
DIN 5157. Single-cut BSP pipe tap. HSS-G single-cut tap with straight flute D format, with 5-pitch spiral point Short version for blind and through holes Profile ground and relief ground, for manual and machine use For Whitworth pipe threads DIN 259 ISO 228 Square stem Tap wrench available under order no. ; 508-9389 508-9389 or ; 444-946 444-946 depending on the shaft size
1 products found
JPY: 10,400
USD: 64.71
-
EVENTUS 42 Piece HSS Thread Tap & Die Set 10731
DIN 352, DIN 223B. Cutting tool set 44-piece. HSS-G tap, cutting die and holding tool as per DIN 3-piece sets of all sizes, each with 1 x front, middle and bottom tap Straight flute, profile and relief ground For metric ISO thread DIN 13, tolerance 6H Square stem
1 products found
JPY: 35,100
USD: 218.39
-
EVENTUS 16 Piece M12 HSS Short machine tap Set 20331
Metric Tap Set. Straight flute taps with die-cast tap wrench.
1 products found
JPY: 79,600
USD: 495.27
-
EVENTUS 29 Piece HSS Tap & Drill Set 10703
DIN 352. Manual tap sets, 3-part, metric assortment. HSS manual tap assortments with straight flute, profile ground and relief ground 3-piece sets of all sizes, each with 1 x front, middle and bottom tap For metric ISO thread DIN 13, tolerance 6H Square stem Tap wrench separate, see RS stock no. ; 508-9389 508-9389 ff. Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 24,800
USD: 154.31
-
EVENTUS HSS PG13.5 Short Machine Thread Tap 20244
HSS PG European Conduit Taps. Conduit tap designed with an 80° inclusive thread angle to enable threads to be cut on very thin wall sections. High Speed Steel construction Plain shank
1 products found
JPY: 11,500
USD: 71.55
-
EVENTUS HSS PG11 Short Machine Thread Tap 20243
HSS PG European Conduit Taps. Conduit tap designed with an 80° inclusive thread angle to enable threads to be cut on very thin wall sections. High Speed Steel construction Plain shank
1 products found
JPY: 10,100
USD: 62.84
-
EVENTUS HSS-G M12 Spiral Flute Thread Tap, 110 mm Length 10357
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 3,950
USD: 24.58
-
EVENTUS HSS-G M10 Spiral Flute Thread Tap, 100 mm Length 10356
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 3,260
USD: 20.28
-
EVENTUS HSS-G M4 Spiral Flute Thread Tap, 63 mm Length 10352
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 2,340
USD: 14.56
-
EVENTUS HSS-G M8 Spiral Flute Thread Tap, 90 mm Length 10355
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 2,900
USD: 18.04
-
EVENTUS HSS-G M6 Spiral Flute Thread Tap, 80 mm Length 10354
DIN 371, DIN 376. Machine Tap, Spiral Flute, Blind Holes. HSS-G machine tap with 35° right-hand spiral flute Profile ground and relief ground For metric ISO thread DIN 13, tolerance 6H 2-pitch point, for blind holes Reinforced, M12 with fall-through shaft
1 products found
JPY: 2,470
USD: 15.37
