[Artesyn Embedded Technologies] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Artesyn Embedded Technologies 40W Triple Output Embedded Switch Mode Power Supply SMPS, 2.5 A, 5 A, 700 mA, 5/±15V dc LPT45
EN60950. VDE; UL Recognised; CSA Certified; NEMKO; BABT. Total of output loads must not exceed rating of unit. Forced air cooling of 30CFM @ 50°C increases the 25W O/P to 40W, the 40W to 55W and the 60W units to 80W, LPT80 units to 85W. Ratings are reduced with a cover kit. 25-80W Universal Input, Single/Triple Output, LP Series. Frequency 47 to 440Hz Manufacturer part nos with a T suffix denote terminal block connection, all others feature Molex mating connectors (not provided) In-built EMI filter (Class B) Over voltage protection Overload protection 3x5in. open PCB format Remote sense on main output Adjustable main output (-5 +10%) High peak ratings for 30 seconds
1 products found
JPY: 10,900
USD: 68.33
-
Artesyn Embedded Technologies AYA 3W Isolated DC-DC Converter Through Hole, Voltage in 4.5 → 10 V dc, Voltage AYA01CC05-L
EN55022 Class A, FCC Level A
Artesyn AYA Series DC/DC Converter1 products found
JPY: 7,340
USD: 46.01
-
Artesyn Embedded Technologies AXA 25W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out AXA05A18-L
UL/cUL60950-1, IEC/EN60950-1
Artesyn AXA series insulated DC/DC converters1 products found
JPY: 14,000
USD: 87.76
-
Artesyn Embedded Technologies AXA 25W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out AXA02B18-L
UL/cUL60950-1, IEC/EN60950-1
Artesyn AXA series insulated DC/DC converters1 products found
JPY: 13,300
USD: 83.37
-
Artesyn Embedded Technologies for use with CNS650-M Series Power Supply CNS-BBAR-KIT
Bus Bar Kit for CNS650 M
1 products found
JPY: 2,870
USD: 17.99
-
Artesyn Embedded Technologies 40W 1 Output Embedded Switch Mode Power Supply SMPS, 2.3A, 24V dc Open Frame LPS45
EN60950. VDE; UL Recognised; CSA Certified; NEMKO; BABT. Total of output loads must not exceed rating of unit. Forced air cooling of 30CFM @ 50°C increases the 25W O/P to 40W, the 40W to 55W and the 60W units to 80W, LPT80 units to 85W. Ratings are reduced with a cover kit. 25-80W Universal Input, Single/Triple Output, LP Series. Frequency 47 to 440Hz Manufacturer part nos with a T suffix denote terminal block connection, all others feature Molex mating connectors (not provided) In-built EMI filter (Class B) Over voltage protection Overload protection 3x5in. open PCB format Remote sense on main output Adjustable main output (-5 +10%) High peak ratings for 30 seconds
1 products found
JPY: 15,900
USD: 99.67
-
Artesyn Embedded Technologies 60W 1 Output Embedded Switch Mode Power Supply SMPS, 5A, 12V dc Open Frame LPS63
EN60950. VDE; UL Recognised; CSA Certified; NEMKO; BABT. Total of output loads must not exceed rating of unit. Forced air cooling of 30CFM @ 50°C increases the 25W O/P to 40W, the 40W to 55W and the 60W units to 80W, LPT80 units to 85W. Ratings are reduced with a cover kit. 25-80W Universal Input, Single/Triple Output, LP Series. Frequency 47 to 440Hz Manufacturer part nos with a T suffix denote terminal block connection, all others feature Molex mating connectors (not provided) In-built EMI filter (Class B) Over voltage protection Overload protection 3x5in. open PCB format Remote sense on main output Adjustable main output (-5 +10%) High peak ratings for 30 seconds
1 products found
JPY: 12,300
USD: 77.10
-
Artesyn Embedded Technologies 100W 1 Output Embedded Switch Mode Power Supply SMPS, 6.3A, 24V dc Medical Approved Open LPS105-M
UL 60950, 60601-1. TUV, CB, UL recognised component for US. 2. LPS100-M Series, Universal Input, 2x4 inch, Single Output, Open frame. The Emerson Network Power LPS100-M series is a family of Medical Power supplies. These Power supplies have a very small open frame design. The LPS100-M has a full load efficiency of 88% and a power density in excess of 14 W per cubic inch. This Medical Power supply is ideal for applications in Information Technology Equipment (ITE), light industrial systems and medical applications in low power medical, dental and laboratories. Medical and ITE safeties Active power factor correction Miniature size 2x4 inch, high power density Adjustable main output 100W (80W for LPS102-M) ouput power convection cooled, 150W (120W for LPS102-M) with 30CFM forced air Isolated 12V Fan output Built in Class B EMI filter Low power logic control Remote sense Fits into 1U high applications 550,000 hours demonstrated MTBF Overload, overvoltage and thermal overload protection EN61000-3-2 compliant
1 products found
JPY: 17,600
USD: 110.32
-
Artesyn Embedded Technologies 125W 1 Output Embedded Switch Mode Power Supply SMPS, 20.8A, 12V dc Medical Approved Open LPS203-M
UL 60950, 60601-1. TUV, CB, UL recognised component for US. LPS200-M Series, Universal Input, 3x5 inch, Single Output. Medical and ITE safeties Active power factor correction Miniature size 3x5 inch, high power density Adjustable main output 125W (100W for LPS202-M) ouput power convection cooled, 250W (200W for LPS202-M) with 30CFM forced air Isolated 12V Fan output Built in Class B EMI filter Low power logic control Remote sense Fits into 1U high applications 550,000 hours demonstrated MTBF Overload, overvoltage and thermal overload protection EN61000-3-2 compliant
1 products found
JPY: 23,100
USD: 144.80
-
Artesyn Embedded Technologies 125W 1 Output Embedded Switch Mode Power Supply SMPS, 10.4A, 24V dc Medical Approved Open LPS205-M
UL 60950, 60601-1. TUV, CB, UL recognised component for US. LPS200-M Series, Universal Input, 3x5 inch, Single Output. Medical and ITE safeties Active power factor correction Miniature size 3x5 inch, high power density Adjustable main output 125W (100W for LPS202-M) ouput power convection cooled, 250W (200W for LPS202-M) with 30CFM forced air Isolated 12V Fan output Built in Class B EMI filter Low power logic control Remote sense Fits into 1U high applications 550,000 hours demonstrated MTBF Overload, overvoltage and thermal overload protection EN61000-3-2 compliant
1 products found
JPY: 23,100
USD: 144.80
-
Artesyn Embedded Technologies 125W 1 Output Embedded Switch Mode Power Supply SMPS, 5.2A, 48V dc Medical Approved Open LPS208-M
UL 60950, 60601-1. TUV, CB, UL recognised component for US. LPS200-M Series, Universal Input, 3x5 inch, Single Output. Medical and ITE safeties Active power factor correction Miniature size 3x5 inch, high power density Adjustable main output 125W (100W for LPS202-M) ouput power convection cooled, 250W (200W for LPS202-M) with 30CFM forced air Isolated 12V Fan output Built in Class B EMI filter Low power logic control Remote sense Fits into 1U high applications 550,000 hours demonstrated MTBF Overload, overvoltage and thermal overload protection EN61000-3-2 compliant
1 products found
JPY: 23,100
USD: 144.80
-
Artesyn Embedded Technologies 25W 1 Output Embedded Switch Mode Power Supply SMPS, 8A, 5V dc Medical Approved Open Frame NPS22-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 6,600
USD: 41.37
-
Artesyn Embedded Technologies 25W 1 Output Embedded Switch Mode Power Supply SMPS, 3.3A, 12V dc Medical Approved Open NPS23-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 6,610
USD: 41.43
-
Artesyn Embedded Technologies 25W 1 Output Embedded Switch Mode Power Supply SMPS, 2.7A, 15V dc Medical Approved Open NPS24-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 7,300
USD: 45.76
-
Artesyn Embedded Technologies 40W 1 Output Embedded Switch Mode Power Supply SMPS, 11A, 5V dc Medical Approved Open NPS42-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 8,310
USD: 52.09
-
Artesyn Embedded Technologies 45W 1 Output Embedded Switch Mode Power Supply SMPS, 1.9A, 24V dc Medical Approved Open NPS45-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 8,190
USD: 51.34
-
Artesyn Embedded Technologies 45W 1 Output Embedded Switch Mode Power Supply SMPS, 5A, 12V dc Medical Approved Open NPS43-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 8,460
USD: 53.03
-
Artesyn Embedded Technologies 60W 1 Output Embedded Switch Mode Power Supply SMPS, 5.5A, 12V dc Medical Approved Open NPS63-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 8,870
USD: 55.60
-
Artesyn Embedded Technologies 80W Triple Output Embedded Switch Mode Power Supply SMPS, 2 A, 9 A, 18 A, 5/±12V dc LPT102-M
TUV 60950, 60601-1, UL 60950, 60601-1, CSA 60950, 60601-1, NEMKO 60950, 60601-1, AUSTEL 60950, 60601-1, CB Certificate ; report,CE Mark (LVD). UL, TUV. A connector kit is available, please see stock number ; 751-2610 751-2610 Derate each output as 2.5% per degree from 50° to 70 °C. 2. Switch Mode Medical Approved Triple Output AC/DC Power Supply - LPT100-M Series. Switch mode triple output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, triple output voltage with an adjustable main output, active PFC, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Universal AC input Active Power Factor Correction Adjustable main output High efficiency Overload and overvoltage protection Thermal overload protection Remote sensing Power fail Built in EMI filter (CISPR 22 Class B) Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI//RFI Compliance: FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted Harmonic current compliance: EN61000-3-2
1 products found
JPY: 20,200
USD: 126.62
-
Artesyn Embedded Technologies 60W 1 Output Embedded Switch Mode Power Supply SMPS, 2.75A, 24V dc Medical Approved Open NPS65-M
TUV: 60950, 60601-1, UL: 60950, 60601-1, CSA: 60950, 60601-1, NEMKO: 60950, 60601-1, CB: Certificate and report, CE: Mark (LVD), CQC: Mark. TUV, UL (except NPS60-M models), CB. Mating connectors for AC input connectors see stock numbers ; 173-3076 173-3076 and ; 679-4723 679-4723. For DC Output connectors see stock numbers ; 173-3105 173-3105 and ; 679-4723 679-4723 Derate output at 2.5% per degree from 50° to 80°C. 2. Switch Mode Medical Approved Single Output AC/DC Power Supply - NPS-M Series. Switch mode single output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable output voltage, high efficiency, a built in EMI filter and dual AC fuses. The footprint for these AC/DC power supplies is 2" x 4" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Worldwide IT equipment (ITE) approval Class I approved (NPS60-M is UL Class I approved), Class II approved (with Class A EMI) Universal AC input Adjustable output voltage High efficiency Overload and overvoltage protection Remote sensing Built in EMI filter (CISPR 22 Class B) Less than 300 mW no load power consumption Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI compliance: FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, VDE0878PT3 Class B conducted Harmonic Current compliance: EN61000-3-2
1 products found
JPY: 8,880
USD: 55.66
-
Artesyn Embedded Technologies 100W Quad Output Embedded Switch Mode Power Supply SMPS, 2 A, 3 A, 9 A, 18 A, 5±12/24V dc LPQ202-M
TUV 60950, 60601-1, UL 60950, 60601-1, CSA 60950, 60601-1, CB Certificate ; report, CE Mark (LVD). UL, TUV, CB. A cover kit is available please see stock number ; 751-1601 751-1601. A connector kit is available please see ; 751-2614 751-2614 Derate each output as 2.5% per degree from 50° to 70 °C. MTBF: Bellcore. 2. Switch Mode Medical Approved Quad Output AC/DC Power Supply - LPQ200-M Series. Switch mode quad output AC/DC embedded power supplies with a low safety ground leakage current and medical and ITE approval. These switch mode AC/DC power supplies have a universal AC input, adjustable quad output voltages , active PFC and a built in EMI filter. The footprint for these AC/DC power supplies is 3" x 5" with a height of less than 1U. Suitable applications for these embedded AC/DC power supplies include information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. Non-patient contact and non-patient critical medical safety approvals Worldwide IT equipment (ITE) approval Universal AC input Active Power Factor Correction Adjustable outputs Overload and overvoltage protection Thermal overload protection Remote sensing Power fail Built in EMI filter (CISPR 22 Class B) Safety ground leakage current of 275ua @ 50/60 Hz; 264 VAC input EMI//RFI Compliance: FCC Class B conducted; CISPR22 Class B conducted; EN55022 Class B conducted; VDE0878PT3 Class B conducted Harmonic current compliance: EN61000-3-2
1 products found
JPY: 26,400
USD: 165.49
-
Artesyn Embedded Technologies 240W 1 Output Embedded Switch Mode Power Supply SMPS, 30A, 12V dc Medical Approved Open LPS363-M
60950, 60601-1. TUV, UL, cULus, CB, CE, CCC. LPS360-M Series, Universal Input, 3x5 inch, Single Output. The Emerson Network Power LPS360-M is a series of open-frame, single output, AC-DC power supplies, the power supply also provides 12 V fan and 5 V standby outputs. The LPS360-M features ITE and medical safety approvals and accept a universal input of 90–264 Vac or 120–300 Vdc. Comprehensive overcurrent, overvoltage and overtemperature protection is provided as standard. The LPS360-M power supplies have a full load efficiency of up to 92%. Depending on operating conditions, they provide up to 220W of output power with free air convection cooling and up to 360W with 400 LFM of forced air. Less than 1U high, the power supplies are ideal for light industrial systems as well as for non-patient contact medical applications. Medical and ITE safeties Active power factor correction Less than 1U high Remote sense Power fail Adjustable main output Built-in Class B EMI filter 5 V Standby output Remote Inhibit PMBus commands Digital I2C interface Class I and Class II approved Dual AC fuses
1 products found
JPY: 38,800
USD: 243.21
-
Artesyn Embedded Technologies AEE 15W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out AEE03A18-LS
UL60950-1, CE Mark. UL, CE. Operating temperature is without derating. Astec 15W Single Output Regulated Isolated DC-DC Converter - ASA-15W Series. 15W regulated, isolated DC-DC converter with a wide 4:1 input range and a 1in x 2in package. This isolated DC-DC converter is available with single or dual outputs. Ultra-wide 4:1 input voltage range Regulated outputs 1.5kV input / output isolation Built-in filter meets EN 55022, Class A, without external components Under voltage lockout, over current and short circuit protection with auto restart Shielded metal case with insulated baseplate Demonstrated MTBF >1 million hours Industry standard pin-out
1 products found
JPY: 9,460
USD: 59.30
-
Artesyn Embedded Technologies ASA 5W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ASA01A18-LS
UL60950-1, cUL60950-1, EN60950, IEC60950, CE Mark. UL, cUL, CE. Operating temperature is without derating. Astec 6W Single Output Regulated Isolated DC-DC Converter - ASA-6W Series. 6W regulated, isolated DC-DC converter with a wide 4:1 input range and a 1.25in x 0.8in package. This isolated DC-DC converter is available with single or dual outputs. Ultra-wide 4:1 input voltage range Regulated outputs 1.5kV input/output isolation Built-in filter meets EN 55022, Class A, without external components Under voltage lockout, over current and short circuit protection with auto restart Shielded metal case with insulated baseplate Demonstrated MTBF >1 million hours 24-pin DIP with industry standard pin-out
1 products found
JPY: 53,100
USD: 332.85
-
Artesyn Embedded Technologies ASA 5W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ASA01A18-LS
UL60950-1, cUL60950-1, EN60950, IEC60950, CE Mark. UL, cUL, CE. Operating temperature is without derating. Astec 6W Single Output Regulated Isolated DC-DC Converter - ASA-6W Series. 6W regulated, isolated DC-DC converter with a wide 4:1 input range and a 1.25in x 0.8in package. This isolated DC-DC converter is available with single or dual outputs. Ultra-wide 4:1 input voltage range Regulated outputs 1.5kV input/output isolation Built-in filter meets EN 55022, Class A, without external components Under voltage lockout, over current and short circuit protection with auto restart Shielded metal case with insulated baseplate Demonstrated MTBF >1 million hours 24-pin DIP with industry standard pin-out
1 products found
JPY: 5,850
USD: 36.67
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00F18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 40,900
USD: 256.38
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00A18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 35,800
USD: 224.41
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00B18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 37,700
USD: 236.32
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00C18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 37,100
USD: 232.56
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00AA18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 38,800
USD: 243.21
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out ATA00BB18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 38,700
USD: 242.59
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00F36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 40,000
USD: 250.74
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00A36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 35,800
USD: 224.41
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00C36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 37,700
USD: 236.32
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00H36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 37,700
USD: 236.32
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00AA36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 40,900
USD: 256.38
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00BB36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 40,900
USD: 256.38
-
Artesyn Embedded Technologies ATA 3W Isolated DC-DC Converter Through Hole, Voltage in 18 → 75 V dc, Voltage out ATA00CC36-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn ATA 3W Series Isolated DC / DC Converter. Artesyn ATA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 80% with an ultra-wide 4:1 input range. The ATA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The ATA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits 3 W total power. 12, 24 or 48 V options available. Single ; dual output. Ultra compact DIP ; SIP options. 4:1 input range. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 40,800
USD: 255.75
-
Artesyn Embedded Technologies AXA 10W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out AXA02F18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn AXA Series Isolated DC / DC Converter. Artesyn AXA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 87% with an ultra-wide 4:1 input range. The AXA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The AXA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits Single ; dual output. Ultra compact DIP ; SIP options. Metal cased with isolated baseplate. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 83,900
USD: 525.92
-
Artesyn Embedded Technologies AXA 10W Isolated DC-DC Converter Through Hole, Voltage in 9 → 36 V dc, Voltage out AXA02A18-L
UL/cUL 60950-1, IEC/EN 60950-1. 3. Artesyn AXA Series Isolated DC / DC Converter. Artesyn AXA series of isolated DC / DC converters offer an ultra compact DIP or SIP package, with a low profile of 8 mm. The series offers a highly efficient option of up to 87% with an ultra-wide 4:1 input range. The AXA series alows offers a remote on/off functionality, adding an extra layer of customisation for your application. The AXA series is also qualified for lead-free reflow solder process according to IPC/JEDEC J-STD-020D. Features and Benefits Single ; dual output. Ultra compact DIP ; SIP options. Metal cased with isolated baseplate. Remote on/off functionality. Input filter adheres to EN55022, class A ; FCC level A.
1 products found
JPY: 77,300
USD: 484.55
