[Pressmaster] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Pressmaster Ratchet Crimping Tool 4300-2262
Tooling is not supplied by Radiall. MCX Crimp Tool. A ratchet action, comfort grip, crimp tool for terminating the centre contact and outer sheath crimping of MCX coaxial connectors.
1 products found
JPY: 55,100
USD: 342.83
-
Pressmaster KKB 0325S Ratchet Crimping Tool for Crimp Contact 4300-2241
Pressmaster Hand Crimp Tool for Non Insulated Terminals. This hand crimp tool is ideal for crimping the RS range of non insulated crimp terminals with a wire size range of 0.5 to 2.5mm ;sup>2 ;/sup> (AWG 22-14), and produces an indent-crimp. Made from hardened alloy steel, this Pressmaster hand crimp tool has a full cycle crimp mechanism to ensure a consistent and reliable crimp and a ratchet release mechanism to clear miscrimps and obstructions. It also features a precision eccentric adjustment for consistent performance and the ability to calibrate and a unique mechanism to reduce the amount of hand force required for operation. Additional features include a non-slip pad that holds the tool in place when applying leverage on a work surface, and a hole in the handle for attachment of a safety strap. This CRIMPEX COMFORT II hand crimp tool can be customized for right or left hand users.
1 products found
JPY: 24,400
USD: 151.82
-
Pressmaster KAA 0760 Ratchet Crimping Tool for Insulated Terminal 4300-2364
Pressmaster KAA-0760 Ergonomic Hand Crimp Tool. The KAA-0760 ergonomic hand crimp tool is designed for crimping red, blue and yellow pre-insulated crimp terminals with wires of cross-section range from 0.5 to 6.0mm2. This ratchet hand crimp tool has asymmetric colour-coded die nests, a ratchet with safety release, and ergonomic handles allowing two-handed operation for a comfortable, secure crimping action. For replacement die set see stock number ; 557-862 557-862 Features and Benefits: Non-slip main handle and low friction moving handle ensure a comfortable hand grip Provides two-hand grip in the final phase of crimping, increasing comfort and productivity Unique mechanism significantly reduces hand force requirement over competing for crimping tools The non-slip pad holds the tool in place when using on a work surface Full cycle crimp mechanism to ensure consistent, reliable crimp Ratchet release mechanism to clear miscrimps and obstruction Precision eccentric adjustment for consistent performance and ability to calibrate Hole in handle allows attachment of safety strap for working overhead each tool has a unique serial number for traceability Durable: lifespan exceeds 50000 cycles High strength, through hardened alloy Swedish steel construction Compact size: only 255 mm of length Weight: 560g Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
1 products found
JPY: 29,300
USD: 182.31
-
Pressmaster PZ03 Series, Crimping Tool, Bootlace Ferrule, Wire size 0.5 → 6 mm² 4300-2428
Crimp Tool for Bootlace Ferrules 0.5 - 6mm². Five cavity die head tool (Komfort tool)
1 products found
JPY: 46,800
USD: 291.19
-
Pressmaster PZ03 Series, Crimping Tool, Bootlace Ferrule, Wire size 4 → 10 mm² 4300-2429
Crimp Tool for Bootlace Ferrules 4 - 10mm². The Pressmaster 3 cavity die head tool is designed for crimping bootlace ferrules 4-10mm2 in size. The Pressmaster is a manual tool that is part of the pressmaster Komfort crimping tool range. Each Pressmaster 3 cavity die head tool is designed to give consistent and reliable crimp connections, and is precisely tooled to guarantee performance. Ratchet action and an emergency release mechanism are built in. The crimping tool is ergonomically designed for low effort crimping.
1 products found
JPY: 46,800
USD: 291.19
-
Pressmaster KCC 0908S Ratchet Crimping Tool for Coaxial 4300-2439
Pressmaster KCC 0908S Coaxial Hand Crimp Tool. The KCC 0908S is an ergonomic hand crimp tool for coaxial cable connectors. Producing 3.25 mm, 4.52 mm, 1.69 mm/.128'', 178", and 0.067 hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for a wide range of coaxial cable types including RG122/U, RG143A/U, RG174A/U, RG179B/U, RG180B/U, RG187A/U, RG188A/U, RG212/U, RG222/U, RG279/U, RG303/U, RG316/U, RG6 Quad, RG6A/U, Twinax Features and Benefits: Non-slip main handle and low friction moving handle ensure a comfortable hand grip Provides two-hand grip in the final phase of crimping, increasing comfort and productivity Unique mechanism significantly reduces hand force requirement over competing for crimping tools The non-slip pad holds the tool in place when used on a work surface Full cycle crimp mechanism to ensure consistent, reliable crimp Ratchet release mechanism to clear miscrimps and obstructions Precision eccentric adjustment for consistent performance and ability to calibrate Hole in handle allows attachment of safety strap for working overhead Each tool has a unique serial number for traceability Durable: lifespan exceeds 50000 cycles High strength, through hardened alloy Swedish steel construction Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
1 products found
JPY: 33,100
USD: 205.95
-
Pressmaster Wire Stripper 4320-0656
The stripping tool comes with a straight blade cassette.
Embla wire-stripping tool with wide range of applicability1 products found
JPY: 20,700
USD: 128.80
-
Pressmaster Replacement Cable Stripper Replacement Cassette for use with Interchangeable Strip 4320-0657
Stripping tool supplied with straight blade cassette. Embla Wide-Range Wire Stripping Tool. "'Professional grade precision self-adjusting cut and strip tool for preparing PVC, PTFE, THHN and rubber insulated wires Interchangeable strip blade cassettes Strips most insulations to 16mm ;sup>2 ;/sup> Cuts stranded wires from 0.02 mm ;sup>2 ;/sup> to 10mm ;sup>2 ;/sup> Wire stop for accurate strip lengths Ergonomic design, with soft grip mains handle Manufactured from new high strength nylon and cycle-tested to over 150000 cycles"
1 products found
JPY: 6,180
USD: 38.45
-
Pressmaster Wire Stripper 4.5 → 40mm Stripping Range, 168mm Overall Length 4320-0763
Tor - Heavy Duty Cable Stripping Tool. Supplied with two hooks for rotary, spiral or longitudinal stripping of cables from 4.5mm - 40mm diameter Simple twist of handle turns blade to produce desired cut Spiral stripping ability allows for easy removal of difficult insulations and window strips Spare blades can be stored inside tool body Each hook incorporates an unlocking pin which releases the other hook, giving this tool the widest stripping range of any tool of its type Blade automatically returns to start/rotary position at end of strip cycle
1 products found
JPY: 19,100
USD: 118.84
-
Pressmaster Wire Stripper 2.5 → 11mm Stripping Range, 90.5mm Overall Length 4320-0765
Oden Data Cable Strip Tool. A precision stripping tool for removing the outer sheath from multicore data and fibre optic cables up to 11mm diameter. Precise setting via 9 position adjustment wheel Easy to use - squeeze together, insert cable, rotate tool, remove and pull off scrap Smooth, rounded, lightweight pocketable design Safe - no exposed blades Replacement blade cassette available (< 479-5825') 479-5825
1 products found
JPY: 8,590
USD: 53.45
-
Pressmaster Replacement Cable Stripper Blade for use with Cable Strippers 4320-0766
Oden Data Cable Strip Tool. A precision stripping tool for removing the outer sheath from multicore data and fibre optic cables up to 11mm diameter. Precise setting via 9 position adjustment wheel Easy to use - squeeze together, insert cable, rotate tool, remove and pull off scrap Smooth, rounded, lightweight pocketable design Safe - no exposed blades Replacement blade cassette available (< 479-5825') 479-5825
1 products found
JPY: 2,410
USD: 15.00
-
Pressmaster MCT Series, Crimp Die Set, Open Crimp Barrel, Wire size 22 → 18 AWG, 24 → 22 AWG, 26 → 4300-3150AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 23,800
USD: 148.08
-
Pressmaster Ratchet Crimping Tool 4300-1844
For suitable die sets (which must be purchased separately) see, for example, Stock no. ; 185-7756 185-7756. Crimp Tool (Outer Ferrule). Crimp tool for crimping outer ferrule of BT43 connectors when used with the appropriate die set. This crimp tool is supplied in a carry case which has storage provision for separate die sets.
1 products found
JPY: 40,800
USD: 253.86
-
Pressmaster Ratchet Crimping Tool 4300-2231
Komfort Line Mini-terminal Tool. Range Compatibility/Tooling Detail. RS range mini yellow, red (typically ; 239-4098 239-4098 / ; 534-238 534-238 ) and Plasti-Grip red (typically ; 431-8844 431-8844 )
1 products found
JPY: 26,800
USD: 166.75
-
Pressmaster KCC 2511 Ratchet Crimping Tool for Coaxial 4300-2204
Pressmaster KCC 1113S Coaxial Hand Crimp Tool. The KCC 2511 is an ergonomic hand crimp tool for BNC, TNC and N coaxial cable connectors. Producing 5.41 mm, 10.90 mm, 2,54 mm, 1.69 mm/.213'',429", 0.100", 0.067'' hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for a wide range of coaxial cables see manufacturers product data sheet for a full list. Features and Benefits Non-slip main handle and low friction moving handle ensure a comfortable hand grip Provides two-hand grip in the final phase of crimping, increasing comfort and productivity Unique mechanism significantly reduces hand force requirement over competing for crimping tools The non-slip pad holds the tool in place when used on a work surface Full cycle crimp mechanism to ensure consistent, reliable crimp Ratchet release mechanism to clear miscrimps and obstructions Precision eccentric adjustment for consistent performance and ability to calibrate Hole in handle allows attachment of safety strap for working overhead Each tool has a unique serial number for traceability Durable: lifespan exceeds 50000 cycles High strength, through hardened alloy Swedish steel construction Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
1 products found
JPY: 40,700
USD: 253.24
-
Pressmaster PZ03 Series, Crimping Tool, Bootlace Ferrule, Wire size 10 → 25 mm² 4300-2430
Crimp Tool for Bootlace Ferrules 10 - 25mm². Three cavity die head tool (Komfort tool)
1 products found
JPY: 56,900
USD: 354.03
-
Pressmaster PZ03 Series, Crimping Tool, Bootlace Ferrule, Wire size 35 → 50 mm² 4300-2431
Crimp Tool for Bootlace Ferrules 35-50mm ;sup>2 ;/sup>. Two die cavity die head tool (Komfort tool)
1 products found
JPY: 55,200
USD: 343.45
-
Pressmaster Ratchet Crimping Tool 4300-2433
Komfort 3 Cavity Die Ratchet Tool
1 products found
JPY: 24,900
USD: 154.93
-
Pressmaster Ratchet Crimping Tool for Terminal 4300-2434
0.5 - 6.0mm² 'F' Crimper. 0.5 - 6.0 mm² 'F' Crimp Tool for use with RS range 'F' style terminals (in the wire range 0.5 to 6.0mm²) typical stock no. < 488-1263') 488-1263/
1 products found
JPY: 71,700
USD: 446.12
-
Pressmaster Ratchet Crimping Tool for Terminal 4300-2435
0.1 - 1.5mm² 'F' Crimper. 0.1 - 1.5 mm² 'F' Crimp Tool for use with RS range 'F' style terminals (in the wire range 0.1 to 1.5mm²) typical stock no. < 488-1241') 488-1241/
1 products found
JPY: 38,200
USD: 237.68
-
Pressmaster Ratchet Crimping Tool for Crimp Terminal 4300-2432
All Pressmaster tools are compatible with the RS and Weidmüller ferrules. For general information on the Pressmaster 'Original Line' and 'Komfort' tools see the Insulated Crimp Terminal Tooling earlier in this section. Self Adjusting Crimp Tool for Ferrules ; End Splices. Self-adjusting single die head tool (Komfort tool)
1 products found
JPY: 37,400
USD: 232.70
-
Pressmaster Ratchet Crimping Tool 4300-2436
Pressmaster Komfort/Original Line. The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping. The standard version has extended handles allowing two handed operation for improved leverage, reducing fatigue and increasing productivity. All tools include full ratchet action with release mechanism. General operating instructions are included with each tool. The Pressmaster Original Line tool is a high quality steel frame tool with ratchet action designed for crimping coaxial cables as specified. General operating instructions included. All these Pressmaster hand crimp tools are supplied with die sets.
1 products found
JPY: 37,500
USD: 233.33
-
Pressmaster Ratchet Crimping Tool 4300-2437
Pressmaster Komfort/Original Line. The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping. The standard version has extended handles allowing two handed operation for improved leverage, reducing fatigue and increasing productivity. All tools include full ratchet action with release mechanism. General operating instructions are included with each tool. The Pressmaster Original Line tool is a high quality steel frame tool with ratchet action designed for crimping coaxial cables as specified. General operating instructions included. All these Pressmaster hand crimp tools are supplied with die sets.
1 products found
JPY: 38,100
USD: 237.06
-
Pressmaster Ratchet Crimping Tool 4300-3767
Pressmaster Komfort/Original Line. The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping. The standard version has extended handles allowing two handed operation for improved leverage, reducing fatigue and increasing productivity. All tools include full ratchet action with release mechanism. General operating instructions are included with each tool. The Pressmaster Original Line tool is a high quality steel frame tool with ratchet action designed for crimping coaxial cables as specified. General operating instructions included. All these Pressmaster hand crimp tools are supplied with die sets.
1 products found
JPY: 37,500
USD: 233.33
-
Pressmaster Crimp Die Set, Terminal, Wire size 1 → 2.3 mm², Hex size 4.3mm 4300-2395
not supplied by Radiall. Die set ; 409-3595 409-3595 employs a single cavity for crimping type BT54 connectors. This connector does not require the centre contact to be crimped. Die Set
1 products found
JPY: 17,000
USD: 105.77
-
Pressmaster Cable Stripper Blade, Cable Stripper Replacement Cassette for use with Interchangeable Strip 4320-0658
Stripping tool supplied with straight blade cassette. Embla Wide-Range Wire Stripping Tool. "'Professional grade precision self-adjusting cut and strip tool for preparing PVC, PTFE, THHN and rubber insulated wires Interchangeable strip blade cassettes Strips most insulations to 16mm ;sup>2 ;/sup> Cuts stranded wires from 0.02 mm ;sup>2 ;/sup> to 10mm ;sup>2 ;/sup> Wire stop for accurate strip lengths Ergonomic design, with soft grip mains handle Manufactured from new high strength nylon and cycle-tested to over 150000 cycles"
1 products found
JPY: 8,580
USD: 53.39
-
Pressmaster Replacement Replacement Cassette for use with 16 sq.mm Wire Stripping Tool 4320-0762
Stripping tool supplied with straight blade cassette. Embla Wide-Range Wire Stripping Tool. "'Professional grade precision self-adjusting cut and strip tool for preparing PVC, PTFE, THHN and rubber insulated wires Interchangeable strip blade cassettes Strips most insulations to 16mm ;sup>2 ;/sup> Cuts stranded wires from 0.02 mm ;sup>2 ;/sup> to 10mm ;sup>2 ;/sup> Wire stop for accurate strip lengths Ergonomic design, with soft grip mains handle Manufactured from new high strength nylon and cycle-tested to over 150000 cycles"
1 products found
JPY: 14,300
USD: 88.98
-
Pressmaster Crimping Tool 4300-3128/AAB
Pressmaster (MCT) Portable Crimp Tool Crimp Die
Pressmaster MCT Crimp Die Product for Portable Crimp Tool (Part Number); 492-9595 492-9595). These MCT crimping tool dies can be used with a wide range of connector types, including coaxial, RJ network, automotive, and timer.1 products found
JPY: 13,700
USD: 85.24
-
Pressmaster MCT Series, Crimp Die Set, Terminal, Wire size 22 → 14 AWG 4300-3129/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 13,000
USD: 80.89
-
Pressmaster MCT Series, Crimp Die Set, Terminal, Wire size 22 → 14 AWG 4300-3137/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 13,200
USD: 82.13
-
Pressmaster MCT Series, Crimp Die Set, Terminal, Wire size 12 → 8 AWG 4300-3139/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 11,400
USD: 70.93
-
Pressmaster MCT Series, Crimp Die Set, Buttsplice, Ferrule, Wire size 24 → 8 AWG 4300-3127/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 10,900
USD: 67.82
-
Pressmaster MCT Series, Crimp Die Set, Open Crimp Barrel, Wire size 16 → 14 AWG, 22 → 18 AWG 4300-3151/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 23,500
USD: 146.22
-
Pressmaster MCT Series, Crimp Die Set, Open Crimp Barrel, Wire size 12 → 10 AWG, 16 → 14 AWG, 22 → 4300-3146/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 23,800
USD: 148.08
-
Pressmaster MCT Series, Crimp Die Set, BNC, TNC, Coaxial Type RG174, RG179 4300-3140/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 10,900
USD: 67.82
-
Pressmaster MCT Series, Crimp Die Set, BNC, Coaxial, TNC, Coaxial Type RG58, RG59, RG62, RG71 4300-3136/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 10,900
USD: 67.82
-
Pressmaster Crimping Tool for RJ45 4300-3144/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 14,800
USD: 92.09
-
Pressmaster MCT Series, Crimp Die Set, Buttsplice, Ferrule, Wire size 6 → 4 AWG 4300-3153/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 14,500
USD: 90.22
-
Pressmaster MCT Series, Crimp Die Set, Coaxial, Coaxial Type CATV, RG59, RG6 4300-3138/AAB
Pressmaster (MCT) Mobile Crimp Tool Crimp Dies. A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number ; 492-9595 492-9595 ). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.
1 products found
JPY: 14,600
USD: 90.84
-
Pressmaster Heat Seal Crimp Kit,61 piece 4300-3663
Heat Seal Crimp Kit
1 products found
JPY: 69,100
USD: 429.94
