[Fluke Networks] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
Office Supplies and Stationery
-
OA and Computer Equipment
-
Fluke Networks MMC-50-SCST, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR MMC-50-SCST
MMC-50-SCST Multimode Launch Cable. Fluke Networks MMC-50-SCST is a 50μm SC/ST Multimode launch cable. Connectors: 1 x SC multi-mode male, 1 x ST multi-mode male For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 121,000
USD: 758.48
-
Fluke Networks MMC-50-SCSC, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR MMC-50-SCSC
MMC-50-SCSC Multimode Launch Cable. Fluke Networks MMC-50-SCSC is a 50μm SC/SC Multimode launch cable. Connectors: 2 x SC multi-mode male For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 122,000
USD: 764.75
-
Fluke Networks MMC-62-SCST, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR MMC-62-SCST
MMC-62-SCST Multimode Launch Cable. Fluke Networks MMC-62-SCST is a 62μm SC/ST Multimode launch cable. Connectors: 1 x SC multi-mode male, 1 x ST multi-mode male For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 124,000
USD: 777.28
-
Fluke Networks MRC-50EFC-SCSCKIT, Fibre Optic Test Equipment Cord Set for Certifiber® Pro Optical Loss Test Set, SC MRC-50EFC-SCSCKIT
Fluke Networks MRC-50EFC-SCSCKIT. Multimode compliant test reference cord kit (2m) for testing 50μm SC terminated fibers (4 SC/SC). Test reference cord used in conjunction with Fluke Networks Encircled Flux multimode compliant sources Contains: 2 SC/SC EF-TRCs and 2 SC/SC TRCs Encircled Flux multimode test reference cord kit 50 μm
1 products found
JPY: 158,000
USD: 990.41
-
Fluke Networks MRC-50-SCSC, Fibre Optic Test Equipment Patch Cord for Certifiber® Pro Optical Loss Test Set, SC MRC-50-SCSC
Fluke Networks MRC-50-SCSC. Fluke Networks MRC50SCSC Multimode test reference cord for testing SC terminated fibers (SC/SC). Connector Type: SC/SC Multimode test reference cord 50μm SC/SC 2m Length
1 products found
JPY: 19,200
USD: 120.35
-
Fluke Networks NFA-ST, Fibre Optic Test Equipment Adapter for OFTM Power Meter and DTX Module Inputs NFA-ST
NFA-ST Interchangeable ST Adapter (Set of 2). Set of two Fluke Networks NFA-ST-SINGLE ST Interchangeable Adapter. For use with the SFPOWERMETER SimpliFiber Pro optical power meter.
1 products found
JPY: 94,400
USD: 591.74
-
Fluke Networks NFA-LC, Fibre Optic Test Equipment Adapter for OFTM Power Meter and DTX Module Inputs NFA-LC
Fluke Networks NFA-LC Adapters. Set of two LC Adapters for DTX-xFM2 power meter port.
1 products found
JPY: 94,300
USD: 591.11
-
Fluke Networks NFA-SC, Fibre Optic Test Equipment Adapter for OFTM Power Meter and DTX Module Inputs NFA-SC
SimpliFiber Pro Interchangeable Adapters
1 products found
JPY: 96,100
USD: 602.40
-
Fluke Networks SMC-9-SCSC, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR SMC-9-SCSC
SMC-9-SCSC Singlemode Launch Cable. Fluke Networks MMC-9-SCSC is a 9μm SC/LC Singlemode Launch Cable. Connectors: 2 x SC single mode male Connector Type: SC/SC 9 μm For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 122,000
USD: 764.75
-
Fluke Networks SMC-9-SCST, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR SMC-9-SCST
SMC-9-SCST Singlemode Launch Cable. Fluke Networks MMC-9-SCSC is a 9μm SC/ST Singlemode Launch Cable. Connectors: 1 x SC single mode male, 1 x ST single mode male Connector Type: SC/ST 9 μm For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 124,000
USD: 777.28
-
Fluke Networks SRC-9-SCSC-KIT, Fibre Optic Test Equipment Cord Set for Certifiber® Pro Optical Loss Test Set, Testing SRC-9-SCSC-KIT
Fluke Networks SRC-9-SCSC-KIT. Fluke Networks SRC9SCSCKIT Singlemode cord kit for testing SC terminated fibers, 2m Length, (4 SC/SC). Connector Type: SC/SC Singlemode test reference cord kit 9 μm Used with CertiFiberPro Tester
1 products found
JPY: 68,200
USD: 427.51
-
Fluke Networks FI-1000-KIT, Fibre Optic Test Equipment Tool Kit for Optifiber® Pro OTDR FI-1000-KIT
FI-1000-KIT USB Fiber Inspection Video plus tip set. USB Fiber Inspection Video Probe for Versiv products (FiberInspector Pro, CertiFiber Pro, OptiFiber Pro, DSX CableAnalyzer and OneTouch AT Network Assistant) and Tip Set (LC, FC/SC Bulkhead, 1.25 and 2.5mm Universal Tips in a Box).
1 products found
JPY: 618,000
USD: 3,873.88
-
［Discontinued］Fluke Networks FTK2000 Fibre Optic Kit 0.01 dB, -60 → +10 dBm FTK2000
Multimode/Singlemode Fiber Verification Kit. Starter kits for contractors and network technicians who install and maintain fibre links. Available in singlemode or multimode configurations, quickly verify optical loss and power levels at 850 and 1300nm or 1310 and 1550nm. Add additional sources, microscopes, and VFL options as needed. Features and Benefits:. Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record Additional wavelengths of 1490 nm and 1625 nm CheckActive™ feature emits an audible tone and displays an icon when a live fibre is detected, eliminating the need to set up a measurement FindFiber™ Remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fibre link to match colour combinations Min/Max capability automates precision tracking of intermittent power fluctuations Large internal memory save 1000 results which enable continuous testing and recording LinkWare Cable Test Management software helps to analyse test results and create professional test reports Various kit configurations for all first line fibre handling needs, including fibre verification, inspection, and cleaning – all housed in a professional, rugged carrying case. Kit Contents. SimpliFiber Pro optical power meter Source SC power-meter adapter Carrying case. Accessories:. Patch Cords ; 874-1327 874-1327 , ; 874-1314 874-1314 , ; 874-1324 874-1324 , ; 123-6401 123-6401 , ; 874-1368 874-1368 , ; 874-1377 874-1377. Adapters ; 661-9098 661-9098 , ; 661-9089 661-9089 , ; 661-9091 661-9091. Inspection scopes ; 123-6402 123-6402 , ; 123-6403 123-6403. Cleaning kit ; 811-8601 811-8601 .
1 products found
JPY: 771,000
USD: 4,832.95
-
［Discontinued］Fluke Networks NFA-LC-SINGLE, Fibre Optic Test Equipment Adapter for SimpliFibre Pro NFA-LC-SINGLE
Fluke Networks NFA-LC Adapters. Set of two LC Adapters for DTX-xFM2 power meter port.
1 products found
JPY: 22,600
USD: 141.67
-
［Discontinued］Fluke Networks NFK2-DPLX-SC, Fibre Optic Test Equipment Patch Cord for SC Adapter NFK2-DPLX-SC
NFK2-DPLX-SC Duplex Reference Cords. Duplex Multimode Test Reference Cords for SC Adapter, 50μm Core diameter (Set of 2).
1 products found
JPY: 48,400
USD: 303.39
-
［Discontinued］Fluke Networks SRC-9-SCLC-KIT, Fibre Optic Test Equipment Cord Set for Certifiber® Pro Optical Loss Test Set, Testing SRC-9-SCLC-KIT
Fluke Networks SRC-9-SCLC-KIT. Fluke Networks SRC9SCLCKIT Singlemode cord kit for testing LC terminated fibers, 2m Length, (2 SC/LC, 2 LC/LC). Connector Type: SC/LC, LC/LC Singlemode test reference cord kit 9 μm Used with CertiFiberPro Tester
1 products found
JPY: 36,630
USD: 229.61
-
［Discontinued］Fluke Networks IntelliTone 200 Probe MT-8200-63A
IntelliTone Kit. Breakthrough IntelliTone™ digital signal technology finds cables other toners/probes can t. Speeds cable location with advanced sensing modes. Simplified signal interpretation with smart LED and audio indicators. Rejects noise and false signals Identifies and diagnoses POTS with multi-line Telco detect, polarity and ring indication Audible and visual signal indication simplifies cable location in noisy environments Diagnoses essential cable information with polarity, continuity, and talk battery Safely and effectively tones active networks Additional probes can be ordered separately
1 products found
JPY: 40,300
USD: 252.62
-
［Discontinued］Fluke Networks IntelliTone Video, Data & Voice Wiring Tester of Cable Continuity, Ethernet Port Test, Miswire, Open MT-8200-49A
MicroMapper and MicroMapper Remote, patch cable, (4) 1.5 V AAA Alkaline battery and user guide. Fluke Networks MicroMapper™ Wiremap Checker. Compact with high durability, Fluke Networks presents this handheld video, data ; voice cable tester designed for network professionals. Quickly and easily verify the integrity of Ethernet twisted pair cables. Whether you need to test for shorts, crossed, split, opens or reversed pairs you can simply press the test button to view the results. With no additional switches, just one switches to cable position for testing and detecting faults. If cables are hidden in walls, floors, bundles or ceilings the Microprobe cable tracer can trace them in conjunction with the tone generator function. Included is a remote unit and patch cords for one-person testing, making light work of testing and eliminating the need for separate connectors. Features and Benefits:. Easy to read LED fault indicators Powerful tone generator for hidden cables Separate remote unit Quick testing with the push of a button Verification of shield integrity Auto-sleep mode Debug-mode for detailed fault identification
1 products found
JPY: 36,600
USD: 229.42
-
［Discontinued］Fluke Networks Fibre Optic Test Equipment VISIFAULT Fibre Optic Locator VISIFAULT
Visifault. The laser-powered Visifault locates fibres, verifies continuity and polarity, and helps find breaks in cables, connectors and splices.. In today's fast-paced workplace, maximising productivity is essential. Whether installing new fibre links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. That is easier said than done when you are faced with a complex network of fibre, connectors and patch cords. You can diagnose and repair simple fibre link problems with Fluke Networks' VisiFault™ Visual Fault Locator (VFL). The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibre, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5 mm and 1.25 mm connectors for easy connection. Raggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use. Bright red visible laser light source Accelerates end-to-end fibre continuity checks Speeds fibre tracing and identification Simplifies fibre polarity verification Aids in location of fibre faults including tight bends, breaks and bad connectors Features continuous and flashing modes Rugged case helps protect against accidental damage caused by impact or vibration Over 80 hours of battery life with 2 AA batteries Handy lanyard attachment and carrying case. Accessories:. Accessories: Adapter ; 146-2855 146-2855
1 products found
JPY: 95,300
USD: 597.38
-
［Discontinued］Fluke Networks CableIQ LAN Test Equipment CIQ-IDK24
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 80,000
USD: 501.47
-
［Discontinued］Fluke Networks Speaker Wire Adapter for CableQ Qualification Tester CIQ-SPKR
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 17,150
USD: 107.50
-
［Discontinued］Fluke Networks RJ45/11 Modular Adapter for CableQ Qualification Tester CIQ-RJA
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 14,290
USD: 89.58
-
［Discontinued］Fluke Networks Wiremap Adapter for CableQ Qualification Tester CIQ-WM
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 31,430
USD: 197.02
-
［Discontinued］Fluke Networks Fibre Optic Test Equipment SimpliFiber Pro Power Meter 0.01 dB SFPOWERMETER
SC adapter and carrying pouch. SimpliFiber Pro Power Meter. Optical power meter with the ability to save a reference power level, allowing direct display of fibre loss. Calibrated for accuracy at 6 different wavelengths (850, 1300, 1310, 1490, 1550, 1625) Intuitive four button panel Large LCD screen USB serial port
1 products found
JPY: 271,000
USD: 1,698.74
-
［Discontinued］Fluke Networks SimpliFiber Pro Fibre Optic Kit 0.01 dB, -60 → +10 dBm SFPSINGLEMODESOURCE
2xAA batteries and instruction sheet. SimpliFiber Pro Optical Fibre Optic Tester. Provides optical power at 1310nm. The source is used with SimpliFiber Pro optical power meter for testing singlemode fibre optic cable. Dual 1310//1500 FP laser emitter Fixed SC optical connector
1 products found
JPY: 335,000
USD: 2,099.92
-
［Discontinued］Fluke Networks NFA-ST-SINGLE, Fibre Optic Test Equipment Adapter for SimpliFibre Pro NFA-ST-SINGLE
NFA-ST Interchangeable ST Adapter (Set of 2). Set of two Fluke Networks NFA-ST-SINGLE ST Interchangeable Adapter. For use with the SFPOWERMETER SimpliFiber Pro optical power meter.
1 products found
JPY: 29,900
USD: 187.43
-
［Discontinued］Fluke Networks IS60, Fibre Optic Test Equipment Tool Kit for Wire & Cable Cutter & Stripper IS60
Pro-Tool Kits. Essential tools for cutting and stripping wires and cables Ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt
1 products found
JPY: 40,200
USD: 251.99
-
［Discontinued］Fluke Networks Fibre Optic Test Equipment Fiber Oneshot PRO Fibre Optic Inspector FOS-S
Fiber OneShot™ PRO. Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analysing fiber links and measuring faults up to 15 miles in less than five seconds. First line of dense for troubleshooting: FTTX, Hybrid Fiber Coaxial Cable (HC), Fiber links between central offices, regional or rural access networks. Measure up to 75459 ft (23000 m) of fiber in seconds Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber First response single mode, Fiber troubleshooter One button testing Locates events up to 15 miles (>23 km) Results in less than 5 seconds Save 99 test results Report up to 9 events per fibre link Never needs calibration Locate sources of bit-error rates caused by end-face contamination or poor connection leads No training required No graphs or confusing data to interpret Measure the distance to reflective and loss incidents Measure the reflectance and loss of incidents Maps the connections in single mode fiber plants by showing the number of events on the fiber and the distance to each event Long battery life, 1500 tests (typical) Battery Type: 2 AA alkaline batteries Rugged construction; vibration and drop tested to 1 m Comfortably fits in the hand Visible in dark areas. Backlit display turns off automatically Dimensions: 17.5 cm H, 7.8 cm W, 3.8 cm D Weight: 0.35 kg (including batteries). Accessories:. Inspection scope ; 123-6402 123-6402 , Patch cords ; 745-7560 745-7560 , ; 874-1352 874-1352 , ; 874-1361 874-1361 and ; 874-1364 874-1364
1 products found
JPY: 446,000
USD: 2,795.71
-
［Discontinued］Fluke Networks Fibre Optic Test Equipment Fiber QuickMap Fibre Optic Inspector FQM-100-M
Fiber QuickMap™. The Fluke Networks Fiber QuickMap is an enterprise fiber troubleshooter that quickly and efficiently locates connections and breaks in multimode fiber. VFLs work well for exposed lengths of fibre near a patch panel by illuminating bad connections and breaks. They are not helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light cannot penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fibre QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fibre. They also identify live fibre. One-button testing – can be used straight out of the box with no user-setup required Six-second test time, eliminating blind troubleshooting that can last hours Locate multiple incidents in the channel to provide full visibility of any potentially problematic links and connections Locate high loss incidents or breaks, the most common causes of multimode fiber failure Locate and measure high reflective incidents, which cause poor network performance with bit error rates Various kit configurations include additional diagnostics tools such as power meters, sources, and fiber inspection microscopes to facilitate Fiber Best Practices and to boost the troubleshooting capability of technicians Perfect data center cabling network tester Battery type:2 AA alkaline batteries (no battery charger) Battery life:1500 tests (typical). Accessories:. Inspection scope ; 123-6402 123-6402. Patch cords ; 874-1324 874-1324 , ; 874-1305 874-1305 , ; 874-1302 874-1302 , ; 874-1308 874-1308 and ; 874-1311. 874-1311.
1 products found
JPY: 438,000
USD: 2,745.57
-
［Discontinued］Fluke Networks NFC-CUBE, Fibre Optic Test Equipment Cleaning Kit for FT120 & FT140 Fiber Viewer Series, FT500 & FT525 NFC-CUBE
NFC-CUBE Fiber Optic Cleaning Cube. NFC-CUBE Fiber Optic Cleaning Cube is used for fiber optic cleaning using the dry or wet / dry concept. Cleaning cube with wipers cleans up to 500 end-faces.
1 products found
JPY: 10,300
USD: 64.57
-
［Discontinued］Fluke Networks CableIQ LAN Test Equipment CIQ-IDK57
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 79,500
USD: 498.34
-
［Discontinued］Fluke Networks Adapter Set for CableQ Qualification Tester CIQ-COAX
CableIQ main unit (CQI 100), RJ45 patch cord (2), RJ11 patch cord (2), USB cable, bare wire adaptor, speaker wire adaptor, coax cable, coax BNC adaptor, coax RCA adaptor, 'Qualified' labels (50), CD ROM user manual, getting started guide, AA batteries (4), soft carrying case. Fluke Networks CableIQ Qualification Tester. Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the CableIQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and a backlight lights up the display in dark conditions. The dial interface switches between modes and the simple test button makes light work providing results in seconds. An additional USB port allows uploading of qualification tests making the CableIQ user friendly and ideal for a variety of applications. Features and Benefits:. Test and troubleshoots all coax, data and voice wiring Graphically maps wiring configuration and distance verification to faults with built-in TDR Locates and traces cables with IntelliTone™ digital signalling technology Software for professional test reports Documents cabling systems are installed correctly and will perform reliably Troubleshoots connectivity problems caused by insufficient bandwidth for voice, 10/100 VoIP or Gigabit Ethernet. IntelliTone probe available separately (stock no. ; 513-6261 513-6261 or ; 513-6463 513-6463 ). What is IntelliTone™ technology?. This technology is cutting-edge, it zeroes in on cables with a digital signal-toning and signal-interpreting process. Using a smart, synchronised digital signal it energises cable conductors. Multiple tone types are used in the signal which helps to locate the correct cable bundle, Isolate a cable within a bundle and Verify cable conductor continuity.
1 products found
JPY: 6,430
USD: 40.31
-
［Discontinued］Fluke Networks NFK2-SMPLX-LC, Fibre Optic Test Equipment Cord Set for SimpliFibre Pro NFK2-SMPLX-LC
SimpliFiber Pro Cord Sets. Fibre optic test reference cord sets
1 products found
JPY: 29,400
USD: 184.29
-
［Discontinued］Fluke Networks NFK3-SMPLX-ST, Fibre Optic Test Equipment Cord Set for SimpliFibre Pro NFK3-SMPLX-ST
SimpliFiber Pro Cord Sets. Fibre optic test reference cord sets
1 products found
JPY: 29,400
USD: 184.29
-
［Discontinued］Fluke Networks NFA-SC-SINGLE, Fibre Optic Test Equipment Adapter for SimpliFibre Pro NFA-SC-SINGLE
SimpliFiber Pro Interchangeable Adapters
1 products found
JPY: 26,700
USD: 167.37
-
［Discontinued］Fluke Networks Fibre Optic Test Equipment FOS-100-S-VFL Fibre Optic Inspector FOS-100-S-VFL
Fiber OneShot™ PRO. Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analysing fiber links and measuring faults up to 15 miles in less than five seconds. First line of dense for troubleshooting: FTTX, Hybrid Fiber Coaxial Cable (HC), Fiber links between central offices, regional or rural access networks. Measure up to 75459 ft (23000 m) of fiber in seconds Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber First response single mode, Fiber troubleshooter One button testing Locates events up to 15 miles (>23 km) Results in less than 5 seconds Save 99 test results Report up to 9 events per fibre link Never needs calibration Locate sources of bit-error rates caused by end-face contamination or poor connection leads No training required No graphs or confusing data to interpret Measure the distance to reflective and loss incidents Measure the reflectance and loss of incidents Maps the connections in single mode fiber plants by showing the number of events on the fiber and the distance to each event Long battery life, 1500 tests (typical) Battery Type: 2 AA alkaline batteries Rugged construction; vibration and drop tested to 1 m Comfortably fits in the hand Visible in dark areas. Backlit display turns off automatically Dimensions: 17.5 cm H, 7.8 cm W, 3.8 cm D Weight: 0.35 kg (including batteries). Accessories:. Inspection scope ; 123-6402 123-6402 , Patch cords ; 745-7560 745-7560 , ; 874-1352 874-1352 , ; 874-1361 874-1361 and ; 874-1364 874-1364
1 products found
JPY: 520,000
USD: 3,259.58
-
［Discontinued］Fluke Networks FIBR-UPC-CORD-2M/RS, Fibre Optic Test Equipment Patch Cord for Fibre OneShot Pro FIBR-UPC-CORD-2M/RS
Fiber OneShot PRO 2m UPC-UPC Patch Cord. 2m Patch cord
1 products found
JPY: 21,500
USD: 134.77
-
［Discontinued］Fluke Networks FTS900 Fibre Optic Kit FQM-100-M-VFL
Fiber QuickMap™. The Fluke Networks Fiber QuickMap is an enterprise fiber troubleshooter that quickly and efficiently locates connections and breaks in multimode fiber. VFLs work well for exposed lengths of fibre near a patch panel by illuminating bad connections and breaks. They are not helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light cannot penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fibre QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fibre. They also identify live fibre. One-button testing – can be used straight out of the box with no user-setup required Six-second test time, eliminating blind troubleshooting that can last hours Locate multiple incidents in the channel to provide full visibility of any potentially problematic links and connections Locate high loss incidents or breaks, the most common causes of multimode fiber failure Locate and measure high reflective incidents, which cause poor network performance with bit error rates Various kit configurations include additional diagnostics tools such as power meters, sources, and fiber inspection microscopes to facilitate Fiber Best Practices and to boost the troubleshooting capability of technicians Perfect data center cabling network tester Battery type:2 AA alkaline batteries (no battery charger) Battery life:1500 tests (typical). Accessories:. Inspection scope ; 123-6402 123-6402. Patch cords ; 874-1324 874-1324 , ; 874-1305 874-1305 , ; 874-1302 874-1302 , ; 874-1308 874-1308 and ; 874-1311. 874-1311.
1 products found
JPY: 630,000
USD: 3,949.10
-
［Discontinued］Fluke Networks MMC-50-SCLC, Fibre Optic Test Equipment Patch Cord for Optifiber® Pro OTDR MMC-50-SCLC
MMC-50-SCLC Multimode Launch Cable. Fluke Networks MMC-50-SCLC is a 50μm SC/LC Multimode launch cable. Connectors: 1 x SC multi-mode male, 1 x LC multi-mode male For use with OptiFiber Pro OTDR and DTX-1800 OTDR
1 products found
JPY: 56,300
USD: 352.91
-
［Discontinued］Fluke Networks MRC-50-EFC-SCLC, Fibre Optic Test Equipment Patch Cord for Certifiber® Pro Optical Loss Test Set, LC MRC-50-EFC-SCLC
Fluke Networks MRC-50-EFC-SCLC. Fluke Networks MRC-50-EFC-SCLC Multimode cord for testing LC terminated fibers (SC/LC). Test reference cord used in conjunction with Fluke Networks Encircled Flux multimode compliant sources Encircled Flux multimode test reference cord Connector Type: SC/LC 50 μm 2m Length
1 products found
JPY: 30,100
USD: 188.68
